##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.20-bioc/R/bin/R CMD check --install=check:MSstatsPTM.install-out.txt --library=/home/biocbuild/bbs-3.20-bioc/R/site-library --timings MSstatsPTM_2.8.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/meat/MSstatsPTM.Rcheck’
* using R version 4.4.2 (2024-10-31)
* using platform: x86_64-pc-linux-gnu
* R was compiled by
    gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0
    GNU Fortran (Ubuntu 13.2.0-23ubuntu4) 13.2.0
* running under: Ubuntu 24.04.1 LTS
* using session charset: UTF-8
* checking for file ‘MSstatsPTM/DESCRIPTION’ ... OK
* checking extension type ... Package
* this is package ‘MSstatsPTM’ version ‘2.8.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .travis.yml
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘MSstatsPTM’ can be installed ... WARNING
Found the following significant warnings:
  Warning: MSstatsPTM.Rd:3: docType ‘_PACKAGE’ is unrecognized
See ‘/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/meat/MSstatsPTM.Rcheck/00install.out’ for details.
* used C++ compiler: ‘g++ (Ubuntu 13.2.0-23ubuntu4) 13.2.0’
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... NOTE
Unexported objects imported by ':::' calls:
  ‘MSstats:::.getMedianSigmaSubject’ ‘MSstats:::.getVarComponent’
  ‘MSstatsConvert:::.filterFewMeasurements’
  ‘MSstatsConvert:::.filterManyColumns’
  ‘MSstatsConvert:::.getChannelColumns’
  ‘MSstatsConvert:::.standardizeColnames’
  See the note in ?`:::` about the use of this operator.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
.extract_pd_mods: no visible binding for global variable
  ‘..sequence_col’
.format.data.process.plots: no visible binding for global variable
  ‘ABUNDANCE’
.pivotPS: no visible binding for global variable ‘..keep_cols’
.plot.model.volcano: no visible binding for global variable
  ‘text.angle’
.progensis.add.sites: no visible binding for global variable
  ‘..col_order’
.qc.all.plot.lf: no visible binding for global variable ‘text.angle’
.qc.single.plot.lf: no visible binding for global variable ‘text.angle’
.removeCutoffSites: no visible binding for global variable
  ‘..mod_pep_col’
.rmConfounded: no visible binding for global variable ‘..col_res’
DIANNtoMSstatsPTMFormat: no visible binding for global variable
  ‘..protein_id_col’
FragPipetoMSstatsPTMFormat: no visible binding for global variable
  ‘..msstats_cols’
MSstatsPTMSiteLocator: no visible binding for global variable
  ‘..mod_pep_col’
MaxQtoMSstatsPTMFormat: no visible binding for global variable
  ‘TMT.keyword’
MaxQtoMSstatsPTMFormat: no visible binding for global variable
  ‘ptm.keyword’
MaxQtoMSstatsPTMFormat: no visible binding for global variable
  ‘mod.num’
MaxQtoMSstatsPTMFormat: no visible binding for global variable
  ‘which.proteinid.ptm’
MaxQtoMSstatsPTMFormat: no visible binding for global variable
  ‘PeptideSequence’
MetamorpheusToMSstatsPTMFormat: no visible binding for global variable
  ‘..protein_id_col’
PStoMSstatsPTMFormat: no visible binding for global variable
  ‘Intensity’
ProgenesistoMSstatsPTMFormat: no visible binding for global variable
  ‘Type’
SkylinetoMSstatsPTMFormat: no visible binding for global variable
  ‘annotation_prot’
dataProcessPlotsPTM: no visible binding for global variable
  ‘PROTEINNAME’
dataProcessPlotsPTM: no visible binding for global variable
  ‘GLOBALPROTEIN’
dataSummarizationPTM: no visible binding for global variable ‘address’
locatePTM: no visible binding for global variable ‘..col_seq’
locatePTM: no visible binding for global variable ‘..col_fasta’
Undefined global functions or variables:
  ..col_fasta ..col_order ..col_res ..col_seq ..keep_cols ..mod_pep_col
  ..msstats_cols ..protein_id_col ..sequence_col ABUNDANCE
  GLOBALPROTEIN Intensity PROTEINNAME PeptideSequence TMT.keyword Type
  address annotation_prot mod.num ptm.keyword text.angle
  which.proteinid.ptm
* checking Rd files ... WARNING
prepare_Rd: MSstatsPTM.Rd:3: docType ‘_PACKAGE’ is unrecognized
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... NOTE
Documented arguments not in \usage in Rd file 'dot-fixTerminus.Rd':
  ‘fasta_file’

Functions with \usage entries need to have the appropriate \alias
entries, and all their arguments documented.
The \usage entries must correspond to syntactically valid R code.
See chapter ‘Writing R documentation files’ in the ‘Writing R
Extensions’ manual.
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking LazyData ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                         user system elapsed
groupComparisonPlotsPTM 9.413  0.031  10.061
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 ERROR
Running the tests in ‘tests/testthat.R’ failed.
Last 13 lines of output:
  Error in `gtable_add_grob(gt, grobs, t = positions$t, b = positions$b, 
      l = positions$l, r = positions$r, z = seq_along(grobs), clip = clip)`: `grobs` must be a single grob or a list of grobs, not a list.
  Backtrace:
      ▆
   1. └─MSstatsPTM::dataProcessPlotsPTM(...) at test_dataProcessPlotsPTM.R:8:5
   2.   └─MSstatsPTM:::.qc.lf(...)
   3.     └─gridExtra::grid.arrange(ptemp.ptm, ptemp.protein, ncol = 1)
   4.       └─gridExtra::arrangeGrob(...)
   5.         └─gtable::gtable_add_grob(grobs = grobs)
   6.           └─gtable:::stop_input_type(grobs, "a single grob or a list of grobs")
   7.             └─rlang::abort(message, ..., call = call, arg = arg)
  
  [ FAIL 1 | WARN 0 | SKIP 0 | PASS 0 ]
  Error: Test failures
  Execution halted
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes ... OK
* checking re-building of vignette outputs ... OK
* checking PDF version of manual ... OK
* DONE

Status: 1 ERROR, 2 WARNINGs, 5 NOTEs
See
  ‘/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/meat/MSstatsPTM.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.20-bioc/R/bin/R CMD INSTALL MSstatsPTM
###
##############################################################################
##############################################################################


* installing to library ‘/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/R/site-library’
* installing *source* package ‘MSstatsPTM’ ...
** using staged installation
** libs
using C++ compiler: ‘g++ (Ubuntu 13.2.0-23ubuntu4) 13.2.0’
g++ -std=gnu++17 -I"/home/biocbuild/bbs-3.20-bioc/R/include" -DNDEBUG  -I'/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/R/site-library/Rcpp/include' -I/usr/local/include    -fpic  -g -O2  -Wall  -c RcppExports.cpp -o RcppExports.o
g++ -std=gnu++17 -I"/home/biocbuild/bbs-3.20-bioc/R/include" -DNDEBUG  -I'/media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/R/site-library/Rcpp/include' -I/usr/local/include    -fpic  -g -O2  -Wall  -c model_adjustment.cpp -o model_adjustment.o
g++ -std=gnu++17 -shared -L/home/biocbuild/bbs-3.20-bioc/R/lib -L/usr/local/lib -o MSstatsPTM.so RcppExports.o model_adjustment.o -L/home/biocbuild/bbs-3.20-bioc/R/lib -lR
installing to /media/volume/teran2_disk/biocbuild/bbs-3.20-bioc/R/site-library/00LOCK-MSstatsPTM/00new/MSstatsPTM/libs
** R
** data
*** moving datasets to lazyload DB
** inst
** byte-compile and prepare package for lazy loading
** help
Warning: MSstatsPTM.Rd:3: docType ‘_PACKAGE’ is unrecognized
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (MSstatsPTM)

R version 4.4.2 (2024-10-31) -- "Pile of Leaves"
Copyright (C) 2024 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
> 
> library(testthat)
> library(mockery)
> library(MSstatsPTM)
> 
> test_check("MSstatsPTM")
[ FAIL 1 | WARN 0 | SKIP 0 | PASS 0 ]

══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test_dataProcessPlotsPTM.R:8:5'): Medians are equalized in ptm data to QC plot helper function ──
Error in `gtable_add_grob(gt, grobs, t = positions$t, b = positions$b, 
    l = positions$l, r = positions$r, z = seq_along(grobs), clip = clip)`: `grobs` must be a single grob or a list of grobs, not a list.
Backtrace:
    ▆
 1. └─MSstatsPTM::dataProcessPlotsPTM(...) at test_dataProcessPlotsPTM.R:8:5
 2.   └─MSstatsPTM:::.qc.lf(...)
 3.     └─gridExtra::grid.arrange(ptemp.ptm, ptemp.protein, ncol = 1)
 4.       └─gridExtra::arrangeGrob(...)
 5.         └─gtable::gtable_add_grob(grobs = grobs)
 6.           └─gtable:::stop_input_type(grobs, "a single grob or a list of grobs")
 7.             └─rlang::abort(message, ..., call = call, arg = arg)

[ FAIL 1 | WARN 0 | SKIP 0 | PASS 0 ]
Error: Test failures
Execution halted