##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD check --install=check:CBN2Path.install-out.txt --library=/home/biocbuild/R/R/site-library --no-vignettes --timings CBN2Path_1.0.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck’
* using R version 4.5.0 (2025-04-11)
* using platform: aarch64-unknown-linux-gnu
* R was compiled by
    aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0
    GNU Fortran (GCC) 14.2.0
* running under: openEuler 24.03 (LTS)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘CBN2Path/DESCRIPTION’ ... OK
* this is package ‘CBN2Path’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘CBN2Path’ can be installed ... OK
* used C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... NOTE
Found the following CITATION file in a non-standard place:
  CITATION.cff
Most likely ‘inst/CITATION’ should be used instead.
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
bcbn: no visible global function definition for ‘SnowParam’
bcbn: no visible binding for global variable ‘datasets’
ctcbn: no visible global function definition for ‘SnowParam’
generateGeomNodePoint: no visible binding for global variable ‘nodes’
generateGeomNodeText: no visible binding for global variable ‘nodes’
generateGgText: no visible binding for global variable ‘x’
generateGgText: no visible binding for global variable ‘y’
generateGgText: no visible binding for global variable ‘label’
generateMatrixGenotypes : f1 : <anonymous>: no visible global function
  definition for ‘combn’
hcbn: no visible global function definition for ‘SnowParam’
variableCapSize: no visible binding for global variable ‘edges’
variableCapSize: no visible binding for global variable ‘x’
variableCapSize: no visible binding for global variable ‘y’
visualizeCBNModel: no visible binding for global variable ‘name’
visualizeFitnessLandscape: no visible binding for global variable ‘x’
visualizeFitnessLandscape: no visible binding for global variable ‘y’
visualizeFitnessLandscape: no visible binding for global variable
  ‘name’
visualizeProbabilities: no visible binding for global variable ‘name’
Undefined global functions or variables:
  SnowParam combn datasets edges label name nodes x y
Consider adding
  importFrom("utils", "combn")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in shell scripts ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking line endings in Makefiles ... OK
* checking compilation flags in Makevars ... OK
* checking for GNU extensions in Makefiles ... OK
* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
* checking use of PKG_*FLAGS in Makefiles ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                           user system elapsed
hcbnSingle              113.333  0.363 113.959
visualizeProbabilities   45.701  0.156  45.981
pathProbQuartetBCBN      37.607  0.579  38.257
bcbn                     24.369  1.644  26.067
jensenShannonDivergence  11.571  0.754  12.357
Predictability           11.046  0.694  11.775
pathProbQuartetRCBN       9.238  0.631   9.903
pathProbQuartetHCBN       6.825  0.546   7.397
pathProbQuartetCTCBN      6.588  0.539   7.141
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 4 NOTEs
See
  ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD INSTALL CBN2Path
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/R/R-4.5.0/site-library’
* installing *source* package ‘CBN2Path’ ...
** this is package ‘CBN2Path’ version ‘1.0.0’
** using staged installation
checking for gcc... /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 accepts -g... yes
checking for /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 option to enable C11 features... none needed
checking for gsl-config... /usr/bin/gsl-config
checking if GSL version >= 2.5... yes
configure: creating ./config.status
config.status: creating src/Makevars
** libs
using C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c bcbn.c -o bcbn.o
bcbn.c: In function ‘bcbn_write_poset’:
bcbn.c:228:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  228 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:232:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  232 |       fprintf(output, "0 0\n");
      |       ^~~~~~~
bcbn.c: In function ‘bcbn_is_equal_int_matrix’:
bcbn.c:332:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  332 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:336:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  336 |       return 1;
      |       ^~~~~~
bcbn.c: In function ‘bcbn_free_lattice_children’:
bcbn.c:433:7: warning: unused variable ‘i’ [-Wunused-variable]
  433 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_print_genotype’:
bcbn.c:641:7: warning: unused variable ‘i’ [-Wunused-variable]
  641 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_bfs_order_ideals’:
bcbn.c:691:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  691 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
bcbn.c:697:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  697 |           if (! is_in)  // add to linear extension:
      |           ^~
bcbn.c: In function ‘bcbn_hamming_distance’:
bcbn.c:794:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  794 |   for(i=0; i<n; i++)
      |   ^~~
bcbn.c:801:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  801 |     free(g);
      |     ^~~~
bcbn.c: In function ‘compute_all_cbn_prob’:
bcbn.c:1056:13: warning: unused variable ‘k’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |             ^
bcbn.c:1056:9: warning: unused variable ‘j’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |         ^
bcbn.c: In function ‘bcbn_reduce_to_cover_relations’:
bcbn.c:1212:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1212 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:1219:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1219 |       while (empty(&q) == FALSE)
      |       ^~~~~
bcbn.c: In function ‘compute_likelihood’:
bcbn.c:1281:15: warning: unused variable ‘likelihood’ [-Wunused-variable]
 1281 |   long double likelihood, likelihood_d;
      |               ^~~~~~~~~~
bcbn.c: In function ‘relocate_theta_i’:
bcbn.c:1367:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1367 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1367:21: warning: unused variable ‘var’ [-Wunused-variable]
 1367 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘compute_theta_transition_prob’:
bcbn.c:1380:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1380 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1380:21: warning: unused variable ‘var’ [-Wunused-variable]
 1380 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘propose_new_cover_relation’:
bcbn.c:1449:11: warning: unused variable ‘k’ [-Wunused-variable]
 1449 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_cover_move’:
bcbn.c:1550:35: warning: unused variable ‘k’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                                   ^
bcbn.c:1550:22: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                      ^~~~~~~~~~~~
bcbn.c:1550:11: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |           ^~~~~~~~~~
bcbn.c: In function ‘relocate_epsilon’:
bcbn.c:1675:25: warning: unused variable ‘x’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1675:21: warning: unused variable ‘var’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c:1675:16: warning: unused variable ‘beta’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                ^~~~
bcbn.c:1675:10: warning: unused variable ‘alpha’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |          ^~~~~
bcbn.c: In function ‘propose_new_bcbn_transitive_closure_relation’:
bcbn.c:1755:11: warning: unused variable ‘k’ [-Wunused-variable]
 1755 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘propose_delete_bcbn_transitive_closure_relation’:
bcbn.c:1878:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1878:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1878:11: warning: unused variable ‘k’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_delete_bcbn_transitive_closure_relation_move’:
bcbn.c:1957:7: warning: unused variable ‘c’ [-Wunused-variable]
 1957 |   int c = 0;
      |       ^
bcbn.c:1946:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1946:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1946:11: warning: unused variable ‘k’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_bcbn_transitive_closure_relation_move’:
bcbn.c:2008:7: warning: unused variable ‘c’ [-Wunused-variable]
 2008 |   int c = 0;
      |       ^
bcbn.c:1997:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1997:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1997:11: warning: unused variable ‘k’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘start_Exp_theta_MH’:
bcbn.c:2362:7: warning: unused variable ‘accepted’ [-Wunused-variable]
 2362 |   int accepted = 0;
      |       ^~~~~~~~
bcbn.c:2358:9: warning: unused variable ‘j’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |         ^
bcbn.c:2358:7: warning: unused variable ‘i’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |       ^
bcbn.c: In function ‘run_MH_sampler’:
bcbn.c:2620:22: warning: unused variable ‘MH_ratio’ [-Wunused-variable]
 2620 |   long double alpha, MH_ratio;
      |                      ^~~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c ctcbn.c -o ctcbn.o
In file included from ctcbn.c:3:
ct-cbn.h: In function ‘print_int_array’:
ct-cbn.h:184:7: warning: unused variable ‘j’ [-Wunused-variable]
  184 |   int j;
      |       ^
ct-cbn.h: In function ‘write_poset’:
ct-cbn.h:274:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  274 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:278:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  278 |       fprintf(output, "0\n");
      |       ^~~~~~~
ct-cbn.h: In function ‘print_genotype’:
ct-cbn.h:803:7: warning: unused variable ‘i’ [-Wunused-variable]
  803 |   int i;
      |       ^
ct-cbn.h: In function ‘bfs_order_ideals’:
ct-cbn.h:853:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  853 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
ct-cbn.h:859:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  859 |           if (! is_in)  // add to linear extension:
      |           ^~
ct-cbn.h: In function ‘hamming_distance’:
ct-cbn.h:956:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  956 |   for(i=0; i<n; i++)
      |   ^~~
ct-cbn.h:963:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  963 |     free(g);
      |     ^~~~
ct-cbn.h: In function ‘is_after’:
ct-cbn.h:1198:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1198 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1201:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1201 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘is_strict_after’:
ct-cbn.h:1211:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1211 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1214:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1214 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘compute_all_exp’:
ct-cbn.h:1283: warning: ignoring ‘#pragma omp parallel’ [-Wunknown-pragmas]
 1283 | #pragma omp parallel for private(i,c,k,j,g, all_pred_in_k, pred,l)
ct-cbn.h:1318:11: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1318 |           for (l = 0; l < m; l++)
      |           ^~~
ct-cbn.h:1346:13: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1346 |             Exp[pos][i] = censexp[pos][i][m-1];
      |             ^~~
ct-cbn.h: In function ‘EM_epsilon’:
ct-cbn.h:1440:7: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1440 |       for(i = 1; i < m; i++)
      |       ^~~
ct-cbn.h:1447:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1447 |         loglik_new += log (prob_tmp) * D[k].count;
      |         ^~~~~~~~~~
ct-cbn.h: In function ‘compute_loglik’:
ct-cbn.h:1471:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1471 |     for(i = 1; i < m; i++)
      |     ^~~
ct-cbn.h:1477:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1477 |       loglik[k] = log (prob_tmp) ;
      |       ^~~~~~
ct-cbn.h: In function ‘MLE’:
ct-cbn.h:1833:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1833 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1839:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1839 |       lambda[i] = (double) N / sum;
      |       ^~~~~~
ct-cbn.h: In function ‘EM’:
ct-cbn.h:1920:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1920 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1939:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1939 |       if (verbose)
      |       ^~
ct-cbn.h: In function ‘violation_map’:
ct-cbn.h:2488:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2488 |   for (i=1; i<=n; i++)
      |   ^~~
ct-cbn.h:2502:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2502 |     qsort(V, idx, sizeof(int *), compare_violation_pairs);  // small violators first
      |     ^~~~~
ct-cbn.h: In function ‘reduce_to_cover_relations’:
ct-cbn.h:2524:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2524 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:2531:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2531 |       while (empty(&q) == FALSE)
      |       ^~~~~
ct-cbn.h: In function ‘try_edge’:
ct-cbn.h:2741:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2741 |     for(j=0;j<n*n;j++)
      |     ^~~
ct-cbn.h:2744:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2744 |       R4[i] = c;
      |       ^~
ct-cbn.h:2784:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2784 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2790:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2790 |               if(c == 1)
      |               ^~
ct-cbn.h:2943:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2943 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2949:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2949 |               if(c == 1)
      |               ^~
ct-cbn.h:2721:17: warning: variable ‘alpha_new’ set but not used [-Wunused-but-set-variable]
 2721 |   double alpha, alpha_new;
      |                 ^~~~~~~~~
ct-cbn.h: In function ‘local_search’:
ct-cbn.h:3134:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3134 |     for(j=1;j<=M->n;j++)
      |     ^~~
ct-cbn.h:3161:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3161 |       print_double_matrix(loglik_next, M->n, M->n);
      |       ^~~~~~~~~~~~~~~~~~~
ct-cbn.h: In function ‘is_equal_int_matrix’:
ct-cbn.h:3196:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3196 |     for (j=0; j<n; j++)
      |     ^~~
ct-cbn.h:3200:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3200 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘ML_path’:
ct-cbn.h:3305:7: warning: variable ‘mut_next’ set but not used [-Wunused-but-set-variable]
 3305 |   int mut_next, index_next;
      |       ^~~~~~~~
ctcbn.c: In function ‘ctcbn_’:
ctcbn.c:88:7: warning: unused variable ‘c’ [-Wunused-variable]
   88 |   int c = 0;
      |       ^
ctcbn.c:84:7: warning: unused variable ‘GPS’ [-Wunused-variable]
   84 |   int GPS = 0;
      |       ^~~
ctcbn.c:79:7: warning: unused variable ‘verbose’ [-Wunused-variable]
   79 |   int verbose = 0;
      |       ^~~~~~~
ctcbn.c: In function ‘hcbn_’:
ctcbn.c:319:7: warning: unused variable ‘c’ [-Wunused-variable]
  319 |   int c = 0;
      |       ^
ctcbn.c:314:7: warning: variable ‘N_iter’ set but not used [-Wunused-but-set-variable]
  314 |   int N_iter = 0;
      |       ^~~~~~
ctcbn.c:313:10: warning: unused variable ‘T’ [-Wunused-variable]
  313 |   double T = REAL(temp)[0];
      |          ^
ctcbn.c:308:7: warning: unused variable ‘t_flag’ [-Wunused-variable]
  308 |   int t_flag = 1;
      |       ^~~~~~
ctcbn.c:306:7: warning: unused variable ‘l_flag’ [-Wunused-variable]
  306 |   int l_flag = 0;
      |       ^~~~~~
ctcbn.c:305:7: warning: unused variable ‘gps_flag’ [-Wunused-variable]
  305 |   int gps_flag = 0;
      |       ^~~~~~~~
ctcbn.c:304:7: warning: variable ‘e_flag’ set but not used [-Wunused-but-set-variable]
  304 |   int e_flag = 0;
      |       ^~~~~~
ctcbn.c:303:7: warning: unused variable ‘f_flag’ [-Wunused-variable]
  303 |   int f_flag = 0;
      |       ^~~~~~
ctcbn.c:302:7: warning: unused variable ‘error_flag’ [-Wunused-variable]
  302 |   int error_flag = 0;
      |       ^~~~~~~~~~
ctcbn.c:468:10: warning: ‘rOutput’ may be used uninitialized [-Wmaybe-uninitialized]
  468 |   return char_to_sexp(rOutput);
      |          ^~~~~~~~~~~~~~~~~~~~~
ctcbn.c:320:9: note: ‘rOutput’ was declared here
  320 |   char* rOutput;
      |         ^~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c init.c -o init.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c queue.c -o queue.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -shared -L/home/biocbuild/R/R-4.5.0/lib -L/usr/local/lib -o CBN2Path.so bcbn.o ctcbn.o init.o queue.o -L/usr/lib64 -lgsl -lgslcblas -lm -L/home/biocbuild/R/R-4.5.0/lib -lR
installing to /home/biocbuild/R/R-4.5.0/site-library/00LOCK-CBN2Path/00new/CBN2Path/libs
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (CBN2Path)

R version 4.5.0 (2025-04-11) -- "How About a Twenty-Six"
Copyright (C) 2025 The R Foundation for Statistical Computing
Platform: aarch64-unknown-linux-gnu

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
> 
> library(testthat)
> library(CBN2Path)
> 
> test_check("CBN2Path")
chain: 1
0
chain: 2
0
chain: 3
0
chain: 4
0
       V1               V2                V3                  V4         
 Min.   :0.0230   Min.   :0.01317   Min.   :0.0006099   Min.   :0.01177  
 1st Qu.:0.6643   1st Qu.:0.50458   1st Qu.:0.3335792   1st Qu.:0.08411  
 Median :0.7822   Median :0.63432   Median :0.5255407   Median :0.11024  
 Mean   :0.7625   Mean   :0.62817   Mean   :0.5268977   Mean   :0.11513  
 3rd Qu.:0.8848   3rd Qu.:0.75705   3rd Qu.:0.7248308   3rd Qu.:0.14188  
 Max.   :1.0000   Max.   :0.99996   Max.   :0.9997604   Max.   :0.33042  
       V5         
 Min.   :-17.129  
 1st Qu.: -8.184  
 Median : -7.766  
 Mean   : -7.859  
 3rd Qu.: -7.390  
 Max.   : -6.899  
       V1                V2                V3                  V4         
 Min.   :0.01258   Min.   :0.05974   Min.   :0.0001636   Min.   :0.01380  
 1st Qu.:0.66120   1st Qu.:0.50770   1st Qu.:0.3328297   1st Qu.:0.08383  
 Median :0.78264   Median :0.63530   Median :0.5264703   Median :0.10986  
 Mean   :0.76220   Mean   :0.63021   Mean   :0.5282339   Mean   :0.11478  
 3rd Qu.:0.88447   3rd Qu.:0.76023   3rd Qu.:0.7268503   3rd Qu.:0.14095  
 Max.   :0.99996   Max.   :0.99990   Max.   :0.9999771   Max.   :0.30660  
       V5         
 Min.   :-12.235  
 1st Qu.: -8.168  
 Median : -7.770  
 Mean   : -7.850  
 3rd Qu.: -7.400  
 Max.   : -6.899  
       V1                V2                 V3                 V4         
 Min.   :0.03152   Min.   :0.005857   Min.   :0.001303   Min.   :0.01231  
 1st Qu.:0.66106   1st Qu.:0.509389   1st Qu.:0.331730   1st Qu.:0.08555  
 Median :0.78362   Median :0.635943   Median :0.533907   Median :0.11251  
 Mean   :0.76180   Mean   :0.629064   Mean   :0.531010   Mean   :0.11738  
 3rd Qu.:0.88540   3rd Qu.:0.760292   3rd Qu.:0.730387   3rd Qu.:0.14344  
 Max.   :0.99998   Max.   :0.999881   Max.   :0.999968   Max.   :0.31592  
       V5         
 Min.   :-13.374  
 1st Qu.: -8.195  
 Median : -7.769  
 Mean   : -7.859  
 3rd Qu.: -7.390  
 Max.   : -6.894  
       V1               V2                 V3                 V4         
 Min.   :0.1273   Min.   :0.003743   Min.   :0.000187   Min.   :0.01343  
 1st Qu.:0.6569   1st Qu.:0.511064   1st Qu.:0.340533   1st Qu.:0.08391  
 Median :0.7768   Median :0.637631   Median :0.540000   Median :0.11071  
 Mean   :0.7580   Mean   :0.632030   Mean   :0.536695   Mean   :0.11468  
 3rd Qu.:0.8806   3rd Qu.:0.757983   3rd Qu.:0.742139   3rd Qu.:0.13980  
 Max.   :1.0000   Max.   :0.999757   Max.   :0.999923   Max.   :0.32368  
       V5         
 Min.   :-12.027  
 1st Qu.: -8.150  
 Median : -7.739  
 Mean   : -7.828  
 3rd Qu.: -7.375  
 Max.   : -6.895  
[1] "Criterion: 1.00106478960189"
Potential scale reduction factors:

     Point est. Upper C.I.
[1,]          1          1
[2,]          1          1
[3,]          1          1
[4,]          1          1
[5,]          1          1

Multivariate psrf

1
[1] "##########################################"
[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]

[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]
> 
> proc.time()
   user  system elapsed 
148.290   0.864 149.307