Package: SAGx

Version: 1.54.0

Command: C:\Users\biocbuild\bbs-3.7-bioc\R\bin\R.exe CMD check --force-multiarch --install=check:SAGx.install-out.txt --library=C:\Users\biocbuild\bbs-3.7-bioc\R\library --no-vignettes --timings SAGx_1.54.0.tar.gz

StartedAt: 2018-10-17 04:39:13 -0400 (Wed, 17 Oct 2018)

EndedAt: 2018-10-17 04:40:46 -0400 (Wed, 17 Oct 2018)

EllapsedTime: 92.9 seconds

RetCode: 0

Status:  OK

CheckDir: SAGx.Rcheck

Warnings: 0

##############################################################################
##############################################################################
###
### Running command:
###
###   C:\Users\biocbuild\bbs-3.7-bioc\R\bin\R.exe CMD check --force-multiarch --install=check:SAGx.install-out.txt --library=C:\Users\biocbuild\bbs-3.7-bioc\R\library --no-vignettes --timings SAGx_1.54.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory 'C:/Users/biocbuild/bbs-3.7-bioc/meat/SAGx.Rcheck'
* using R version 3.5.1 Patched (2018-07-24 r75005)
* using platform: x86_64-w64-mingw32 (64-bit)
* using session charset: ISO8859-1
* using option '--no-vignettes'
* checking for file 'SAGx/DESCRIPTION' ... OK
* checking extension type ... Package
* this is package 'SAGx' version '1.54.0'
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... OK
* checking for portable file names ... OK
* checking whether package 'SAGx' can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking 'build' directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* loading checks for arch 'i386'
** checking whether the package can be loaded ... OK
** checking whether the package can be loaded with stated dependencies ... OK
** checking whether the package can be unloaded cleanly ... OK
** checking whether the namespace can be loaded with stated dependencies ... OK
** checking whether the namespace can be unloaded cleanly ... OK
* loading checks for arch 'x64'
** checking whether the package can be loaded ... OK
** checking whether the package can be loaded with stated dependencies ... OK
** checking whether the package can be unloaded cleanly ... OK
** checking whether the namespace can be loaded with stated dependencies ... OK
** checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
'library' or 'require' calls to packages already attached by Depends:
  'methods' 'stats'
  Please remove these calls from your code.
Packages in Depends field not imported from:
  'methods' 'multtest'
  These packages need to be imported from (in the NAMESPACE file)
  for when this namespace is loaded but not attached.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
File 'SAGx/R/internal.R':
  .onLoad calls:
    require(methods)

Package startup functions should not change the search path.
See section 'Good practice' in '?.onAttach'.

Fstat: no visible binding for global variable 'M'
GSEA.mean.t: no visible binding for global variable 'samroc.res'
GSEA.mean.t: no visible binding for global variable 'kegg'
GSEA.mean.t : maxmeanf: no visible binding for global variable
  'plustat'
R2BASE: no visible binding for global variable 'clingen'
R2BASE: no visible binding for global variable 'AZID'
R2BASE: no visible binding for global variable 'dats'
R2BASE: no visible binding for global variable 'annots'
R2BASE: no visible global function definition for 'write.table'
R2mim: no visible binding for global variable 'inm'
R2mim: no visible global function definition for 'write.table'
Xprep: no visible binding for global variable 'M'
Xprep.resid: no visible binding for global variable 'M'
clin2mim: no visible binding for global variable 'dbs'
clin2mim: no visible binding for global variable 'clinical'
clin2mim: no visible global function definition for 'write.table'
estimatep0: no visible binding for global variable 'pp'
fetchSignal: no visible global function definition for 'sqlQuery'
fp.fn: no visible binding for global variable 'pvals'
gap: no visible binding for global variable 'swiss'
gap: no visible binding for global variable 'g'
list.experiments: no visible global function definition for 'sqlQuery'
mat2TeX: no visible global function definition for 'errif'
myclus: no visible binding for global variable 'swiss'
p0.mom: no visible binding for global variable 'pvalues'
p0.mom: no visible global function definition for 'hist'
pava.fdr: no visible binding for global variable 'pvalues'
rank.genes: no visible binding for global variable 'indats'
rank.trend: no visible binding for global variable 'x'
rsd.test: no visible binding for global variable 'x'
rsd.test: no visible binding for global variable 'y'
samrocN: no visible binding for global variable 'M'
samrocNboot: no visible binding for global variable 'M'
plot,samroc.result-ANY : plot.samroc.result: no visible global function
  definition for 'lines'
plot,samroc.result-ANY : plot.samroc.result: no visible global function
  definition for 'legend'
Undefined global functions or variables:
  AZID M annots clingen clinical dats dbs errif g hist indats inm kegg
  legend lines plustat pp pvals pvalues samroc.res sqlQuery swiss
  write.table x y
Consider adding
  importFrom("datasets", "swiss")
  importFrom("graphics", "hist", "legend", "lines")
  importFrom("utils", "write.table")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking compiled code ... NOTE
Note: information on .o files for i386 is not available
Note: information on .o files for x64 is not available
File 'C:/Users/biocbuild/bbs-3.7-bioc/R/library/SAGx/libs/i386/SAGx.dll':
  Found 'abort', possibly from 'abort' (C), 'runtime' (Fortran)
  Found 'rand', possibly from 'rand' (C)

Compiled code should not call entry points which might terminate R nor
write to stdout/stderr instead of to the console, nor use Fortran I/O
nor system RNGs. The detected symbols are linked into the code but
might come from libraries and not actually be called.

See 'Writing portable packages' in the 'Writing R Extensions' manual.
* checking files in 'vignettes' ... OK
* checking examples ...
** running examples for arch 'i386' ... OK
** running examples for arch 'x64' ... OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in 'inst/doc' ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 3 NOTEs
See
  'C:/Users/biocbuild/bbs-3.7-bioc/meat/SAGx.Rcheck/00check.log'
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   C:\cygwin\bin\curl.exe -O https://malbec2.bioconductor.org/BBS/3.7/bioc/src/contrib/SAGx_1.54.0.tar.gz && rm -rf SAGx.buildbin-libdir && mkdir SAGx.buildbin-libdir && C:\Users\biocbuild\bbs-3.7-bioc\R\bin\R.exe CMD INSTALL --merge-multiarch --build --library=SAGx.buildbin-libdir SAGx_1.54.0.tar.gz && C:\Users\biocbuild\bbs-3.7-bioc\R\bin\R.exe CMD INSTALL SAGx_1.54.0.zip && rm SAGx_1.54.0.tar.gz SAGx_1.54.0.zip
###
##############################################################################
##############################################################################


  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 42975  100 42975    0     0   473k      0 --:--:-- --:--:-- --:--:--  511k

install for i386

* installing *source* package 'SAGx' ...
** libs
C:/Rtools/mingw_32/bin/gcc  -I"C:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/include" -DNDEBUG     -I"C:/extsoft/include"     -O3 -Wall  -std=gnu99 -mtune=generic -c minigsea.c -o minigsea.o
minigsea.c: In function 'MiniGSEA':
minigsea.c:8:12: warning: variable 'k' set but not used [-Wunused-but-set-variable]
    int i,j,k,I;
            ^
C:/Rtools/mingw_32/bin/gcc  -I"C:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/include" -DNDEBUG     -I"C:/extsoft/include"     -O3 -Wall  -std=gnu99 -mtune=generic -c newboot.c -o newboot.o
C:/Rtools/mingw_32/bin/gcc  -I"C:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/include" -DNDEBUG     -I"C:/extsoft/include"     -O3 -Wall  -std=gnu99 -mtune=generic -c samrocNboot.c -o samrocNboot.o
C:/Rtools/mingw_32/bin/gcc -shared -s -static-libgcc -o SAGx.dll tmp.def minigsea.o newboot.o samrocNboot.o -LC:/extsoft/lib/i386 -LC:/extsoft/lib -LC:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/bin/i386 -lR
installing to C:/Users/biocbuild/bbs-3.7-bioc/meat/SAGx.buildbin-libdir/SAGx/libs/i386
** R
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
  converting help for package 'SAGx'
    finding HTML links ... done
    Fstat                                   html  
    GSEA.mean.t                             html  
    JT.test                                 html  
    R2BASE                                  html  
    R2mim                                   html  
    Xprep                                   html  
    Xprep.resid                             html  
    clin2mim                                html  
    cluster.q                               html  
    estimatep0                              html  
    fetchSignal                             html  
    firstpass                               html  
    fom                                     html  
    fp.fn                                   html  
    gap                                     html  
    list.experiments                        html  
    list.intersection.p                     html  
    mat2TeX                                 html  
    myclus                                  html  
    normalise                               html  
    one.probeset.per.gene                   html  
    outlier                                 html  
    p0.mom                                  html  
    pava.fdr                                html  
    pava                                    html  
    rank.genes                              html  
    rank.trend                              html  
    rsd.test                                html  
    samroc.result-class                     html  
    samrocn                                 html  
    samrocnboot                             html  
    union.of.pways                          html  
** building package indices
** installing vignettes
** testing if installed package can be loaded
In R CMD INSTALL

install for x64

* installing *source* package 'SAGx' ...
** libs
C:/Rtools/mingw_64/bin/gcc  -I"C:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/include" -DNDEBUG     -I"C:/extsoft/include"     -O2 -Wall  -std=gnu99 -mtune=generic -c minigsea.c -o minigsea.o
minigsea.c: In function 'MiniGSEA':
minigsea.c:8:12: warning: variable 'k' set but not used [-Wunused-but-set-variable]
    int i,j,k,I;
            ^
C:/Rtools/mingw_64/bin/gcc  -I"C:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/include" -DNDEBUG     -I"C:/extsoft/include"     -O2 -Wall  -std=gnu99 -mtune=generic -c newboot.c -o newboot.o
C:/Rtools/mingw_64/bin/gcc  -I"C:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/include" -DNDEBUG     -I"C:/extsoft/include"     -O2 -Wall  -std=gnu99 -mtune=generic -c samrocNboot.c -o samrocNboot.o
C:/Rtools/mingw_64/bin/gcc -shared -s -static-libgcc -o SAGx.dll tmp.def minigsea.o newboot.o samrocNboot.o -LC:/extsoft/lib/x64 -LC:/extsoft/lib -LC:/Users/BIOCBU˜1/BBS-3˜1.7-B/R/bin/x64 -lR
installing to C:/Users/biocbuild/bbs-3.7-bioc/meat/SAGx.buildbin-libdir/SAGx/libs/x64
** testing if installed package can be loaded
* MD5 sums
packaged installation of 'SAGx' as SAGx_1.54.0.zip
* DONE (SAGx)
In R CMD INSTALL
In R CMD INSTALL
* installing to library 'C:/Users/biocbuild/bbs-3.7-bioc/R/library'
package 'SAGx' successfully unpacked and MD5 sums checked
In R CMD INSTALL