##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD check --install=check:CBN2Path.install-out.txt --library=/home/biocbuild/R/R/site-library --no-vignettes --timings CBN2Path_1.0.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck’
* using R version 4.5.0 (2025-04-11)
* using platform: aarch64-unknown-linux-gnu
* R was compiled by
    aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0
    GNU Fortran (GCC) 14.2.0
* running under: openEuler 24.03 (LTS)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘CBN2Path/DESCRIPTION’ ... OK
* this is package ‘CBN2Path’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘CBN2Path’ can be installed ... OK
* used C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... NOTE
Found the following CITATION file in a non-standard place:
  CITATION.cff
Most likely ‘inst/CITATION’ should be used instead.
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
bcbn: no visible global function definition for ‘SnowParam’
bcbn: no visible binding for global variable ‘datasets’
ctcbn: no visible global function definition for ‘SnowParam’
generateGeomNodePoint: no visible binding for global variable ‘nodes’
generateGeomNodeText: no visible binding for global variable ‘nodes’
generateGgText: no visible binding for global variable ‘x’
generateGgText: no visible binding for global variable ‘y’
generateGgText: no visible binding for global variable ‘label’
generateMatrixGenotypes : f1 : <anonymous>: no visible global function
  definition for ‘combn’
hcbn: no visible global function definition for ‘SnowParam’
variableCapSize: no visible binding for global variable ‘edges’
variableCapSize: no visible binding for global variable ‘x’
variableCapSize: no visible binding for global variable ‘y’
visualizeCBNModel: no visible binding for global variable ‘name’
visualizeFitnessLandscape: no visible binding for global variable ‘x’
visualizeFitnessLandscape: no visible binding for global variable ‘y’
visualizeFitnessLandscape: no visible binding for global variable
  ‘name’
visualizeProbabilities: no visible binding for global variable ‘name’
Undefined global functions or variables:
  SnowParam combn datasets edges label name nodes x y
Consider adding
  importFrom("utils", "combn")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking line endings in shell scripts ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking line endings in Makefiles ... OK
* checking compilation flags in Makevars ... OK
* checking for GNU extensions in Makefiles ... OK
* checking for portable use of $(BLAS_LIBS) and $(LAPACK_LIBS) ... OK
* checking use of PKG_*FLAGS in Makefiles ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                           user system elapsed
hcbnSingle              115.292  0.052 115.652
visualizeProbabilities   46.165  0.211  46.531
pathProbQuartetBCBN      38.194  0.551  38.833
bcbn                     24.349  1.545  25.944
jensenShannonDivergence  11.879  0.765  12.686
Predictability           11.157  0.438  11.634
pathProbQuartetRCBN       9.365  0.619  10.011
pathProbQuartetHCBN       6.991  0.586   7.597
pathProbQuartetCTCBN      6.728  0.503   7.254
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 4 NOTEs
See
  ‘/home/biocbuild/bbs-3.22-bioc/meat/CBN2Path.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/R/R/bin/R CMD INSTALL CBN2Path
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/R/R-4.5.0/site-library’
* installing *source* package ‘CBN2Path’ ...
** this is package ‘CBN2Path’ version ‘1.0.0’
** using staged installation
checking for gcc... /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 accepts -g... yes
checking for /opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 option to enable C11 features... none needed
checking for gsl-config... /usr/bin/gsl-config
checking if GSL version >= 2.5... yes
configure: creating ./config.status
config.status: creating src/Makevars
** libs
using C compiler: ‘aarch64-unknown-linux-gnu-gcc (GCC) 14.2.0’
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c bcbn.c -o bcbn.o
bcbn.c: In function ‘bcbn_write_poset’:
bcbn.c:228:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  228 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:232:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  232 |       fprintf(output, "0 0\n");
      |       ^~~~~~~
bcbn.c: In function ‘bcbn_is_equal_int_matrix’:
bcbn.c:332:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  332 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:336:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  336 |       return 1;
      |       ^~~~~~
bcbn.c: In function ‘bcbn_free_lattice_children’:
bcbn.c:433:7: warning: unused variable ‘i’ [-Wunused-variable]
  433 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_print_genotype’:
bcbn.c:641:7: warning: unused variable ‘i’ [-Wunused-variable]
  641 |   int i;
      |       ^
bcbn.c: In function ‘bcbn_bfs_order_ideals’:
bcbn.c:691:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  691 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
bcbn.c:697:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  697 |           if (! is_in)  // add to linear extension:
      |           ^~
bcbn.c: In function ‘bcbn_hamming_distance’:
bcbn.c:794:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  794 |   for(i=0; i<n; i++)
      |   ^~~
bcbn.c:801:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  801 |     free(g);
      |     ^~~~
bcbn.c: In function ‘compute_all_cbn_prob’:
bcbn.c:1056:13: warning: unused variable ‘k’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |             ^
bcbn.c:1056:9: warning: unused variable ‘j’ [-Wunused-variable]
 1056 |   int i,j,c,k;
      |         ^
bcbn.c: In function ‘bcbn_reduce_to_cover_relations’:
bcbn.c:1212:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1212 |     for (j=0; j<n; j++)
      |     ^~~
bcbn.c:1219:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1219 |       while (empty(&q) == FALSE)
      |       ^~~~~
bcbn.c: In function ‘compute_likelihood’:
bcbn.c:1281:15: warning: unused variable ‘likelihood’ [-Wunused-variable]
 1281 |   long double likelihood, likelihood_d;
      |               ^~~~~~~~~~
bcbn.c: In function ‘relocate_theta_i’:
bcbn.c:1367:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1367 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1367:21: warning: unused variable ‘var’ [-Wunused-variable]
 1367 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘compute_theta_transition_prob’:
bcbn.c:1380:25: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
 1380 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1380:21: warning: unused variable ‘var’ [-Wunused-variable]
 1380 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c: In function ‘propose_new_cover_relation’:
bcbn.c:1449:11: warning: unused variable ‘k’ [-Wunused-variable]
 1449 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_cover_move’:
bcbn.c:1550:35: warning: unused variable ‘k’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                                   ^
bcbn.c:1550:22: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |                      ^~~~~~~~~~~~
bcbn.c:1550:11: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1550 |   int i,j,N_all_comp,N_compatible,k;
      |           ^~~~~~~~~~
bcbn.c: In function ‘relocate_epsilon’:
bcbn.c:1675:25: warning: unused variable ‘x’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                         ^
bcbn.c:1675:21: warning: unused variable ‘var’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                     ^~~
bcbn.c:1675:16: warning: unused variable ‘beta’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |                ^~~~
bcbn.c:1675:10: warning: unused variable ‘alpha’ [-Wunused-variable]
 1675 |   double alpha,beta,var,x;
      |          ^~~~~
bcbn.c: In function ‘propose_new_bcbn_transitive_closure_relation’:
bcbn.c:1755:11: warning: unused variable ‘k’ [-Wunused-variable]
 1755 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘propose_delete_bcbn_transitive_closure_relation’:
bcbn.c:1878:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1878:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1878:11: warning: unused variable ‘k’ [-Wunused-variable]
 1878 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_delete_bcbn_transitive_closure_relation_move’:
bcbn.c:1957:7: warning: unused variable ‘c’ [-Wunused-variable]
 1957 |   int c = 0;
      |       ^
bcbn.c:1946:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1946:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1946:11: warning: unused variable ‘k’ [-Wunused-variable]
 1946 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘get_tp_for_new_bcbn_transitive_closure_relation_move’:
bcbn.c:2008:7: warning: unused variable ‘c’ [-Wunused-variable]
 2008 |   int c = 0;
      |       ^
bcbn.c:1997:26: warning: variable ‘N_all_comp’ set but not used [-Wunused-but-set-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |                          ^~~~~~~~~~
bcbn.c:1997:13: warning: unused variable ‘N_compatible’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |             ^~~~~~~~~~~~
bcbn.c:1997:11: warning: unused variable ‘k’ [-Wunused-variable]
 1997 |   int i,j,k,N_compatible,N_all_comp;
      |           ^
bcbn.c: In function ‘start_Exp_theta_MH’:
bcbn.c:2362:7: warning: unused variable ‘accepted’ [-Wunused-variable]
 2362 |   int accepted = 0;
      |       ^~~~~~~~
bcbn.c:2358:9: warning: unused variable ‘j’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |         ^
bcbn.c:2358:7: warning: unused variable ‘i’ [-Wunused-variable]
 2358 |   int i,j,k = 0;
      |       ^
bcbn.c: In function ‘run_MH_sampler’:
bcbn.c:2620:22: warning: unused variable ‘MH_ratio’ [-Wunused-variable]
 2620 |   long double alpha, MH_ratio;
      |                      ^~~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c ctcbn.c -o ctcbn.o
In file included from ctcbn.c:3:
ct-cbn.h: In function ‘print_int_array’:
ct-cbn.h:184:7: warning: unused variable ‘j’ [-Wunused-variable]
  184 |   int j;
      |       ^
ct-cbn.h: In function ‘write_poset’:
ct-cbn.h:274:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  274 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:278:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  278 |       fprintf(output, "0\n");
      |       ^~~~~~~
ct-cbn.h: In function ‘print_genotype’:
ct-cbn.h:803:7: warning: unused variable ‘i’ [-Wunused-variable]
  803 |   int i;
      |       ^
ct-cbn.h: In function ‘bfs_order_ideals’:
ct-cbn.h:853:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  853 |         for (j=0; j<lin_ext_size; j++)
      |         ^~~
ct-cbn.h:859:11: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  859 |           if (! is_in)  // add to linear extension:
      |           ^~
ct-cbn.h: In function ‘hamming_distance’:
ct-cbn.h:956:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
  956 |   for(i=0; i<n; i++)
      |   ^~~
ct-cbn.h:963:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
  963 |     free(g);
      |     ^~~~
ct-cbn.h: In function ‘is_after’:
ct-cbn.h:1198:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1198 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1201:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1201 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘is_strict_after’:
ct-cbn.h:1211:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1211 |     for ( a=0; a<=M->n; a++ )
      |     ^~~
ct-cbn.h:1214:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1214 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘compute_all_exp’:
ct-cbn.h:1283: warning: ignoring ‘#pragma omp parallel’ [-Wunknown-pragmas]
 1283 | #pragma omp parallel for private(i,c,k,j,g, all_pred_in_k, pred,l)
ct-cbn.h:1318:11: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1318 |           for (l = 0; l < m; l++)
      |           ^~~
ct-cbn.h:1346:13: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1346 |             Exp[pos][i] = censexp[pos][i][m-1];
      |             ^~~
ct-cbn.h: In function ‘EM_epsilon’:
ct-cbn.h:1440:7: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1440 |       for(i = 1; i < m; i++)
      |       ^~~
ct-cbn.h:1447:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1447 |         loglik_new += log (prob_tmp) * D[k].count;
      |         ^~~~~~~~~~
ct-cbn.h: In function ‘compute_loglik’:
ct-cbn.h:1471:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1471 |     for(i = 1; i < m; i++)
      |     ^~~
ct-cbn.h:1477:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1477 |       loglik[k] = log (prob_tmp) ;
      |       ^~~~~~
ct-cbn.h: In function ‘MLE’:
ct-cbn.h:1833:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1833 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1839:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1839 |       lambda[i] = (double) N / sum;
      |       ^~~~~~
ct-cbn.h: In function ‘EM’:
ct-cbn.h:1920:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 1920 |     for (k=0; k<N_u; k++)
      |     ^~~
ct-cbn.h:1939:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 1939 |       if (verbose)
      |       ^~
ct-cbn.h: In function ‘violation_map’:
ct-cbn.h:2488:3: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2488 |   for (i=1; i<=n; i++)
      |   ^~~
ct-cbn.h:2502:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2502 |     qsort(V, idx, sizeof(int *), compare_violation_pairs);  // small violators first
      |     ^~~~~
ct-cbn.h: In function ‘reduce_to_cover_relations’:
ct-cbn.h:2524:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2524 |     for (j=1; j<=n; j++)
      |     ^~~
ct-cbn.h:2531:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2531 |       while (empty(&q) == FALSE)
      |       ^~~~~
ct-cbn.h: In function ‘try_edge’:
ct-cbn.h:2741:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2741 |     for(j=0;j<n*n;j++)
      |     ^~~
ct-cbn.h:2744:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2744 |       R4[i] = c;
      |       ^~
ct-cbn.h:2784:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2784 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2790:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2790 |               if(c == 1)
      |               ^~
ct-cbn.h:2943:13: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 2943 |             for(i=1;i<n+1;i++)
      |             ^~~
ct-cbn.h:2949:15: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 2949 |               if(c == 1)
      |               ^~
ct-cbn.h:2721:17: warning: variable ‘alpha_new’ set but not used [-Wunused-but-set-variable]
 2721 |   double alpha, alpha_new;
      |                 ^~~~~~~~~
ct-cbn.h: In function ‘local_search’:
ct-cbn.h:3134:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3134 |     for(j=1;j<=M->n;j++)
      |     ^~~
ct-cbn.h:3161:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3161 |       print_double_matrix(loglik_next, M->n, M->n);
      |       ^~~~~~~~~~~~~~~~~~~
ct-cbn.h: In function ‘is_equal_int_matrix’:
ct-cbn.h:3196:5: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
 3196 |     for (j=0; j<n; j++)
      |     ^~~
ct-cbn.h:3200:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘for’
 3200 |       return 1;
      |       ^~~~~~
ct-cbn.h: In function ‘ML_path’:
ct-cbn.h:3305:7: warning: variable ‘mut_next’ set but not used [-Wunused-but-set-variable]
 3305 |   int mut_next, index_next;
      |       ^~~~~~~~
ctcbn.c: In function ‘ctcbn_’:
ctcbn.c:88:7: warning: unused variable ‘c’ [-Wunused-variable]
   88 |   int c = 0;
      |       ^
ctcbn.c:84:7: warning: unused variable ‘GPS’ [-Wunused-variable]
   84 |   int GPS = 0;
      |       ^~~
ctcbn.c:79:7: warning: unused variable ‘verbose’ [-Wunused-variable]
   79 |   int verbose = 0;
      |       ^~~~~~~
ctcbn.c: In function ‘hcbn_’:
ctcbn.c:319:7: warning: unused variable ‘c’ [-Wunused-variable]
  319 |   int c = 0;
      |       ^
ctcbn.c:314:7: warning: variable ‘N_iter’ set but not used [-Wunused-but-set-variable]
  314 |   int N_iter = 0;
      |       ^~~~~~
ctcbn.c:313:10: warning: unused variable ‘T’ [-Wunused-variable]
  313 |   double T = REAL(temp)[0];
      |          ^
ctcbn.c:308:7: warning: unused variable ‘t_flag’ [-Wunused-variable]
  308 |   int t_flag = 1;
      |       ^~~~~~
ctcbn.c:306:7: warning: unused variable ‘l_flag’ [-Wunused-variable]
  306 |   int l_flag = 0;
      |       ^~~~~~
ctcbn.c:305:7: warning: unused variable ‘gps_flag’ [-Wunused-variable]
  305 |   int gps_flag = 0;
      |       ^~~~~~~~
ctcbn.c:304:7: warning: variable ‘e_flag’ set but not used [-Wunused-but-set-variable]
  304 |   int e_flag = 0;
      |       ^~~~~~
ctcbn.c:303:7: warning: unused variable ‘f_flag’ [-Wunused-variable]
  303 |   int f_flag = 0;
      |       ^~~~~~
ctcbn.c:302:7: warning: unused variable ‘error_flag’ [-Wunused-variable]
  302 |   int error_flag = 0;
      |       ^~~~~~~~~~
ctcbn.c:468:10: warning: ‘rOutput’ may be used uninitialized [-Wmaybe-uninitialized]
  468 |   return char_to_sexp(rOutput);
      |          ^~~~~~~~~~~~~~~~~~~~~
ctcbn.c:320:9: note: ‘rOutput’ was declared here
  320 |   char* rOutput;
      |         ^~~~~~~
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c init.c -o init.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -I"/home/biocbuild/R/R-4.5.0/include" -DNDEBUG -I/usr/include -I.  -I/usr/local/include    -fPIC  -g -O2  -Wall -Werror=format-security -c queue.c -o queue.o
/opt/ohpc/pub/compiler/gcc/14.2.0/bin/aarch64-unknown-linux-gnu-gcc -std=gnu23 -shared -L/home/biocbuild/R/R-4.5.0/lib -L/usr/local/lib -o CBN2Path.so bcbn.o ctcbn.o init.o queue.o -L/usr/lib64 -lgsl -lgslcblas -lm -L/home/biocbuild/R/R-4.5.0/lib -lR
installing to /home/biocbuild/R/R-4.5.0/site-library/00LOCK-CBN2Path/00new/CBN2Path/libs
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (CBN2Path)

R version 4.5.0 (2025-04-11) -- "How About a Twenty-Six"
Copyright (C) 2025 The R Foundation for Statistical Computing
Platform: aarch64-unknown-linux-gnu

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
> 
> library(testthat)
> library(CBN2Path)
> 
> test_check("CBN2Path")
chain: 1
0
chain: 2
0
chain: 3
0
chain: 4
0
       V1               V2                  V3                  V4         
 Min.   :0.1540   Min.   :0.0001347   Min.   :9.710e-06   Min.   :0.01802  
 1st Qu.:0.8677   1st Qu.:0.2982702   1st Qu.:2.527e-01   1st Qu.:0.08943  
 Median :0.9325   Median :0.4382018   Median :4.109e-01   Median :0.11181  
 Mean   :0.9065   Mean   :0.4605065   Mean   :4.414e-01   Mean   :0.11609  
 3rd Qu.:0.9721   3rd Qu.:0.6043258   3rd Qu.:6.097e-01   3rd Qu.:0.13835  
 Max.   :1.0000   Max.   :0.9999858   Max.   :9.999e-01   Max.   :0.29996  
       V5         
 Min.   :-15.542  
 1st Qu.: -7.153  
 Median : -6.747  
 Mean   : -6.859  
 3rd Qu.: -6.435  
 Max.   : -5.883  
       V1               V2                 V3                  V4         
 Min.   :0.3220   Min.   :0.001241   Min.   :3.233e-05   Min.   :0.01952  
 1st Qu.:0.8695   1st Qu.:0.294725   1st Qu.:2.556e-01   1st Qu.:0.08978  
 Median :0.9314   Median :0.433664   Median :4.194e-01   Median :0.11270  
 Mean   :0.9062   Mean   :0.456636   Mean   :4.494e-01   Mean   :0.11643  
 3rd Qu.:0.9718   3rd Qu.:0.596947   3rd Qu.:6.265e-01   3rd Qu.:0.13842  
 Max.   :1.0000   Max.   :0.999886   Max.   :1.000e+00   Max.   :0.34640  
       V5         
 Min.   :-11.060  
 1st Qu.: -7.140  
 Median : -6.735  
 Mean   : -6.843  
 3rd Qu.: -6.425  
 Max.   : -5.885  
       V1               V2                V3                  V4         
 Min.   :0.2813   Min.   :0.00081   Min.   :0.0003191   Min.   :0.02044  
 1st Qu.:0.8691   1st Qu.:0.29297   1st Qu.:0.2502132   1st Qu.:0.08931  
 Median :0.9334   Median :0.43182   Median :0.4169256   Median :0.11377  
 Mean   :0.9071   Mean   :0.45303   Mean   :0.4482767   Mean   :0.11787  
 3rd Qu.:0.9707   3rd Qu.:0.59525   3rd Qu.:0.6298776   3rd Qu.:0.14184  
 Max.   :1.0000   Max.   :0.99989   Max.   :0.9999601   Max.   :0.42262  
       V5         
 Min.   :-11.640  
 1st Qu.: -7.135  
 Median : -6.729  
 Mean   : -6.840  
 3rd Qu.: -6.422  
 Max.   : -5.876  
       V1               V2                  V3                  V4         
 Min.   :0.2518   Min.   :0.0003723   Min.   :0.0001382   Min.   :0.02297  
 1st Qu.:0.8634   1st Qu.:0.2978615   1st Qu.:0.2534649   1st Qu.:0.08906  
 Median :0.9298   Median :0.4373656   Median :0.4212127   Median :0.11258  
 Mean   :0.9036   Mean   :0.4573148   Mean   :0.4491244   Mean   :0.11670  
 3rd Qu.:0.9702   3rd Qu.:0.5978520   3rd Qu.:0.6253325   3rd Qu.:0.14065  
 Max.   :1.0000   Max.   :0.9999846   Max.   :0.9998822   Max.   :0.29360  
       V5         
 Min.   :-16.492  
 1st Qu.: -7.152  
 Median : -6.743  
 Mean   : -6.852  
 3rd Qu.: -6.436  
 Max.   : -5.885  
[1] "Criterion: 1.00046983962518"
Potential scale reduction factors:

     Point est. Upper C.I.
[1,]          1          1
[2,]          1          1
[3,]          1          1
[4,]          1          1
[5,]          1          1

Multivariate psrf

1
[1] "##########################################"
[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]

[ FAIL 0 | WARN 2 | SKIP 0 | PASS 9 ]
> 
> proc.time()
   user  system elapsed 
152.516   0.932 153.867