##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.12-bioc/R/bin/R CMD check --install=check:dasper.install-out.txt --library=/home/biocbuild/bbs-3.12-bioc/R/library --no-vignettes --timings dasper_1.0.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.12-bioc/meat/dasper.Rcheck’
* using R version 4.0.5 (2021-03-31)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘dasper/DESCRIPTION’ ... OK
* this is package ‘dasper’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘dasper’ can be installed ... NOTE
Found the following notes/warnings:
  Non-staged installation was used
See ‘/home/biocbuild/bbs-3.12-bioc/meat/dasper.Rcheck/00install.out’ for details.
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
Unexported object imported by a ':::' call: ‘grid:::calcControlPoints’
  See the note in ?`:::` about the use of this operator.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... OK
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking line endings in shell scripts ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                   user system elapsed
coverage_process 95.268  5.748 104.604
junction_process 71.100  0.868  72.602
plot_sashimi     40.980  0.412  42.420
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 3 NOTEs
See
  ‘/home/biocbuild/bbs-3.12-bioc/meat/dasper.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.12-bioc/R/bin/R CMD INSTALL dasper
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/bbs-3.12-bioc/R/library’
* installing *source* package ‘dasper’ ...
** using non-staged installation via StagedInstall field
** R
** data
*** moving datasets to lazyload DB
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded
* DONE (dasper)

R version 4.0.5 (2021-03-31) -- "Shake and Throw"
Copyright (C) 2021 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library(testthat)
> library(dasper)
> 
> test_check("dasper")
[1] "# Filtering junctions -----------------------------------------------------"
[1] "2021-05-06 00:48:27 - Filtering junctions..."
[1] "2021-05-06 00:48:27 - done!"
[1] "# Annotating junctions ----------------------------------------------------"
[1] "2021-05-06 00:48:27 - Obtaining co-ordinates of annotated exons and junctions from gtf/gff3..."
[1] "2021-05-06 00:48:55 - Getting junction annotation using overlapping exons..."
[1] "2021-05-06 00:48:56 - Tidying junction annotation..."
[1] "2021-05-06 00:48:56 - Deriving junction categories..."
[1] "2021-05-06 00:48:57 - done!"
[1] "# Normalise junctions -----------------------------------------------------"
[1] "2021-05-06 00:48:57 - Clustering junctions..."
[1] "2021-05-06 00:48:57 - Normalising junction counts..."
[1] "2021-05-06 00:48:57 - done!"
[1] "# Score junctions ---------------------------------------------------------"
[1] "2021-05-06 00:48:57 - Calculating the direction of change of junctions..."
[1] "2021-05-06 00:48:58 - Generating junction abnormality score..."
[1] "2021-05-06 00:48:58 - done!"
[1] "2021-05-06 00:49:26 - Loading junctions for sample 1/1..."
[1] "2021-05-06 00:49:26 - Adding control junctions..."
[1] "2021-05-06 00:49:26 - Tidying and storing junction data as a RangedSummarizedExperiment..."
[1] "2021-05-06 00:49:26 - done!"
[1] "2021-05-06 00:49:26 - Loading junctions for sample 1/2..."
[1] "2021-05-06 00:49:26 - Loading junctions for sample 2/2..."
[1] "2021-05-06 00:49:26 - Adding control junctions..."
[1] "2021-05-06 00:49:27 - Tidying and storing junction data as a RangedSummarizedExperiment..."
[1] "2021-05-06 00:49:27 - done!"
[1] "2021-05-06 00:49:27 - Loading junctions for sample 1/2..."
[1] "2021-05-06 00:49:27 - Loading junctions for sample 2/2..."
[1] "2021-05-06 00:49:27 - Adding control junctions..."
[1] "2021-05-06 00:49:27 - Downloading and importing fibroblasts junction data..."
[1] "2021-05-06 00:49:59 - Tidying and storing junction data as a RangedSummarizedExperiment..."
[1] "2021-05-06 00:50:00 - done!"
[1] "2021-05-06 00:50:00 - Loading junctions for sample 1/2..."
[1] "2021-05-06 00:50:00 - Loading junctions for sample 2/2..."
[1] "2021-05-06 00:50:00 - Adding control junctions..."
[1] "2021-05-06 00:50:00 - Loading junctions for sample 1/2..."
[1] "2021-05-06 00:50:00 - Loading junctions for sample 2/2..."
[1] "2021-05-06 00:50:00 - Adding control junctions..."
[1] "2021-05-06 00:50:00 - Loading junctions for sample 1/2..."
[1] "2021-05-06 00:50:00 - Loading junctions for sample 2/2..."
[1] "2021-05-06 00:50:00 - Adding control junctions..."
[1] "2021-05-06 00:50:12 - Obtaining co-ordinates of annotated exons and junctions from gtf/gff3..."
[1] "2021-05-06 00:50:46 - Filtering junctions..."
[1] "2021-05-06 00:50:46 - by count..."
[1] "2021-05-06 00:50:46 - done!"
[1] "2021-05-06 00:50:46 - Filtering junctions..."
[1] "2021-05-06 00:50:46 - by width..."
[1] "2021-05-06 00:50:46 - done!"
[1] "2021-05-06 00:50:46 - Filtering junctions..."
[1] "2021-05-06 00:50:46 - by type..."
[1] "2021-05-06 00:50:46 - done!"
[1] "2021-05-06 00:50:46 - Filtering junctions..."
[1] "2021-05-06 00:50:47 - by overlap with regions..."
[1] "2021-05-06 00:50:47 - done!"
[1] "2021-05-06 00:50:47 - Filtering junctions..."
[1] "2021-05-06 00:50:47 - by count..."
[1] "2021-05-06 00:50:47 - by width..."
[1] "2021-05-06 00:50:47 - by type..."
[1] "2021-05-06 00:50:47 - by overlap with regions..."
[1] "2021-05-06 00:50:47 - done!"
[1] "2021-05-06 00:50:51 - Clustering junctions..."
[1] "2021-05-06 00:50:51 - Filtering junctions..."
[1] "2021-05-06 00:50:51 - by count..."
[1] "2021-05-06 00:50:52 - done!"
[1] "2021-05-06 00:50:52 - Normalising junction counts..."
[1] "2021-05-06 00:50:52 - done!"
[1] "2021-05-06 00:50:52 - Calculating the direction of change of junctions..."
[1] "2021-05-06 00:50:53 - Generating junction abnormality score..."
[1] "2021-05-06 00:50:53 - done!"
[1] "2021-05-06 00:51:04 - generating outlier scores for sample 1/2"
[1] "2021-05-06 00:51:13 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:14 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:14 - generating outlier scores for sample 2/2"
[1] "2021-05-06 00:51:15 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:16 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:16 - done!"
[1] "2021-05-06 00:51:16 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:17 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:24 - Filtering junctions..."
[1] "2021-05-06 00:51:24 - by count..."
[1] "2021-05-06 00:51:24 - done!"
building whole annotation region map done
2 chromosomes for annotated regions read
Processing /home/biocbuild/.cache/BiocFileCache/3ed723029e5c_SRR660824_SRS389722_SRX222703_male_lung.bw
building whole annotation region map done
2 chromosomes for annotated regions read
Processing /home/biocbuild/.cache/BiocFileCache/3ed723029e5c_SRR660824_SRS389722_SRX222703_male_lung.bw
[1] "2021-05-06 00:51:44 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[1] "2021-05-06 00:51:45 - fitting outlier detection model with parameters: behaviour=deprecated, bootstrap=FALSE, contamination=auto, max_features=1, max_samples=auto, n_estimators=100, n_jobs=NULL, random_state=32, verbose=0, warm_start=FALSE"
[ FAIL 0 | WARN 0 | SKIP 0 | PASS 212 ]
> 
> proc.time()
   user  system elapsed 
207.588   7.568 226.032