gitattributes(5) Manual Page

$GIT_DIR/info/attributes, .gitattributes

A gitattributes file is a simple text file that gives attributes to pathnames.

Each line in gitattributes file is of form:

That is, a pattern followed by an attributes list, separated by whitespaces. When the pattern matches the path in question, the attributes listed on the line are given to the path.

Each attribute can be in one of these states for a given path:

When more than one pattern matches the path, a later line overrides an earlier line. This overriding is done per attribute. The rules how the pattern matches paths are the same as in .gitignore files; see gitignore(5). Unlike .gitignore, negative patterns are forbidden.

When deciding what attributes are assigned to a path, git consults $GIT_DIR/info/attributes file (which has the highest precedence), .gitattributes file in the same directory as the path in question, and its parent directories up to the toplevel of the work tree (the further the directory that contains .gitattributes is from the path in question, the lower its precedence). Finally global and system-wide files are considered (they have the lowest precedence).

When the .gitattributes file is missing from the work tree, the path in the index is used as a fall-back. During checkout process, .gitattributes in the index is used and then the file in the working tree is used as a fall-back.

If you wish to affect only a single repository (i.e., to assign attributes to files that are particular to one user’s workflow for that repository), then attributes should be placed in the $GIT_DIR/info/attributes file. Attributes which should be version-controlled and distributed to other repositories (i.e., attributes of interest to all users) should go into .gitattributes files. Attributes that should affect all repositories for a single user should be placed in a file specified by the core.attributesfile configuration option (see git-config(1)). Its default value is $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/attributes is used instead. Attributes for all users on a system should be placed in the $(prefix)/etc/gitattributes file.

Sometimes you would need to override an setting of an attribute for a path to Unspecified state. This can be done by listing the name of the attribute prefixed with an exclamation point !.

Certain operations by git can be influenced by assigning particular attributes to a path. Currently, the following operations are attributes-aware.

These attributes affect how the contents stored in the repository are copied to the working tree files when commands such as git checkout and git merge run. They also affect how git stores the contents you prepare in the working tree in the repository upon git add and git commit.

This attribute enables and controls end-of-line normalization. When a text file is normalized, its line endings are converted to LF in the repository. To control what line ending style is used in the working directory, use the eol attribute for a single file and the core.eol configuration variable for all text files.

Any other value causes git to act as if text has been left unspecified.

This attribute sets a specific line-ending style to be used in the working directory. It enables end-of-line normalization without any content checks, effectively setting the text attribute.

For backwards compatibility, the crlf attribute is interpreted as follows:

While git normally leaves file contents alone, it can be configured to normalize line endings to LF in the repository and, optionally, to convert them to CRLF when files are checked out.

Here is an example that will make git normalize .txt, .vcproj and .sh files, ensure that .vcproj files have CRLF and .sh files have LF in the working directory, and prevent .jpg files from being normalized regardless of their content.

Other source code management systems normalize all text files in their repositories, and there are two ways to enable similar automatic normalization in git.

If you simply want to have CRLF line endings in your working directory regardless of the repository you are working with, you can set the config variable "core.autocrlf" without changing any attributes.

This does not force normalization of all text files, but does ensure that text files that you introduce to the repository have their line endings normalized to LF when they are added, and that files that are already normalized in the repository stay normalized.

If you want to interoperate with a source code management system that enforces end-of-line normalization, or you simply want all text files in your repository to be normalized, you should instead set the text attribute to "auto" for all files.

This ensures that all files that git considers to be text will have normalized (LF) line endings in the repository. The core.eol configuration variable controls which line endings git will use for normalized files in your working directory; the default is to use the native line ending for your platform, or CRLF if core.autocrlf is set.

If any files that should not be normalized show up in git status, unset their text attribute before running git add -u.

Conversely, text files that git does not detect can have normalization enabled manually.

If core.safecrlf is set to "true" or "warn", git verifies if the conversion is reversible for the current setting of core.autocrlf. For "true", git rejects irreversible conversions; for "warn", git only prints a warning but accepts an irreversible conversion. The safety triggers to prevent such a conversion done to the files in the work tree, but there are a few exceptions. Even though…

When the attribute ident is set for a path, git replaces $Id$ in the blob object with $Id:, followed by the 40-character hexadecimal blob object name, followed by a dollar sign $ upon checkout. Any byte sequence that begins with $Id: and ends with $ in the worktree file is replaced with $Id$ upon check-in.

A filter attribute can be set to a string value that names a filter driver specified in the configuration.

A filter driver consists of a clean command and a smudge command, either of which can be left unspecified. Upon checkout, when the smudge command is specified, the command is fed the blob object from its standard input, and its standard output is used to update the worktree file. Similarly, the clean command is used to convert the contents of worktree file upon checkin.

One use of the content filtering is to massage the content into a shape that is more convenient for the platform, filesystem, and the user to use. For this mode of operation, the key phrase here is "more convenient" and not "turning something unusable into usable". In other words, the intent is that if someone unsets the filter driver definition, or does not have the appropriate filter program, the project should still be usable.

Another use of the content filtering is to store the content that cannot be directly used in the repository (e.g. a UUID that refers to the true content stored outside git, or an encrypted content) and turn it into a usable form upon checkout (e.g. download the external content, or decrypt the encrypted content).

These two filters behave differently, and by default, a filter is taken as the former, massaging the contents into more convenient shape. A missing filter driver definition in the config, or a filter driver that exits with a non-zero status, is not an error but makes the filter a no-op passthru.

You can declare that a filter turns a content that by itself is unusable into a usable content by setting the filter.<driver>.required configuration variable to true.

For example, in .gitattributes, you would assign the filter attribute for paths.

Then you would define a "filter.indent.clean" and "filter.indent.smudge" configuration in your .git/config to specify a pair of commands to modify the contents of C programs when the source files are checked in ("clean" is run) and checked out (no change is made because the command is "cat").

For best results, clean should not alter its output further if it is run twice ("clean→clean" should be equivalent to "clean"), and multiple smudge commands should not alter clean's output ("smudge→smudge→clean" should be equivalent to "clean"). See the section on merging below.

The "indent" filter is well-behaved in this regard: it will not modify input that is already correctly indented. In this case, the lack of a smudge filter means that the clean filter must accept its own output without modifying it.

If a filter must succeed in order to make the stored contents usable, you can declare that the filter is required, in the configuration:

Sequence "%f" on the filter command line is replaced with the name of the file the filter is working on. A filter might use this in keyword substitution. For example:

In the check-in codepath, the worktree file is first converted with filter driver (if specified and corresponding driver defined), then the result is processed with ident (if specified), and then finally with text (again, if specified and applicable).

In the check-out codepath, the blob content is first converted with text, and then ident and fed to filter.

If you have added attributes to a file that cause the canonical repository format for that file to change, such as adding a clean/smudge filter or text/eol/ident attributes, merging anything where the attribute is not in place would normally cause merge conflicts.

To prevent these unnecessary merge conflicts, git can be told to run a virtual check-out and check-in of all three stages of a file when resolving a three-way merge by setting the merge.renormalize configuration variable. This prevents changes caused by check-in conversion from causing spurious merge conflicts when a converted file is merged with an unconverted file.

As long as a "smudge→clean" results in the same output as a "clean" even on files that are already smudged, this strategy will automatically resolve all filter-related conflicts. Filters that do not act in this way may cause additional merge conflicts that must be resolved manually.

The attribute diff affects how git generates diffs for particular files. It can tell git whether to generate a textual patch for the path or to treat the path as a binary file. It can also affect what line is shown on the hunk header @@ -k,l +n,m @@ line, tell git to use an external command to generate the diff, or ask git to convert binary files to a text format before generating the diff.

The definition of a diff driver is done in gitconfig, not gitattributes file, so strictly speaking this manual page is a wrong place to talk about it. However…

To define an external diff driver jcdiff, add a section to your $GIT_DIR/config file (or $HOME/.gitconfig file) like this:

When git needs to show you a diff for the path with diff attribute set to jcdiff, it calls the command you specified with the above configuration, i.e. j-c-diff, with 7 parameters, just like GIT_EXTERNAL_DIFF program is called. See git(1) for details.

Each group of changes (called a "hunk") in the textual diff output is prefixed with a line of the form:

This is called a hunk header. The "TEXT" portion is by default a line that begins with an alphabet, an underscore or a dollar sign; this matches what GNU diff -p output uses. This default selection however is not suited for some contents, and you can use a customized pattern to make a selection.

First, in .gitattributes, you would assign the diff attribute for paths.

Then, you would define a "diff.tex.xfuncname" configuration to specify a regular expression that matches a line that you would want to appear as the hunk header "TEXT". Add a section to your $GIT_DIR/config file (or $HOME/.gitconfig file) like this:

Note. A single level of backslashes are eaten by the configuration file parser, so you would need to double the backslashes; the pattern above picks a line that begins with a backslash, and zero or more occurrences of sub followed by section followed by open brace, to the end of line.

There are a few built-in patterns to make this easier, and tex is one of them, so you do not have to write the above in your configuration file (you still need to enable this with the attribute mechanism, via .gitattributes). The following built in patterns are available:

You can customize the rules that git diff --word-diff uses to split words in a line, by specifying an appropriate regular expression in the "diff.*.wordRegex" configuration variable. For example, in TeX a backslash followed by a sequence of letters forms a command, but several such commands can be run together without intervening whitespace. To separate them, use a regular expression in your $GIT_DIR/config file (or $HOME/.gitconfig file) like this:

A built-in pattern is provided for all languages listed in the previous section.

Sometimes it is desirable to see the diff of a text-converted version of some binary files. For example, a word processor document can be converted to an ASCII text representation, and the diff of the text shown. Even though this conversion loses some information, the resulting diff is useful for human viewing (but cannot be applied directly).

The textconv config option is used to define a program for performing such a conversion. The program should take a single argument, the name of a file to convert, and produce the resulting text on stdout.

For example, to show the diff of the exif information of a file instead of the binary information (assuming you have the exif tool installed), add the following section to your $GIT_DIR/config file (or $HOME/.gitconfig file):

Because text conversion can be slow, especially when doing a large number of them with git log -p, git provides a mechanism to cache the output and use it in future diffs. To enable caching, set the "cachetextconv" variable in your diff driver’s config. For example:

This will cache the result of running "exif" on each blob indefinitely. If you change the textconv config variable for a diff driver, git will automatically invalidate the cache entries and re-run the textconv filter. If you want to invalidate the cache manually (e.g., because your version of "exif" was updated and now produces better output), you can remove the cache manually with git update-ref -d refs/notes/textconv/jpg (where "jpg" is the name of the diff driver, as in the example above).

If you want to show differences between binary or specially-formatted blobs in your repository, you can choose to use either an external diff command, or to use textconv to convert them to a diff-able text format. Which method you choose depends on your exact situation.

The advantage of using an external diff command is flexibility. You are not bound to find line-oriented changes, nor is it necessary for the output to resemble unified diff. You are free to locate and report changes in the most appropriate way for your data format.

A textconv, by comparison, is much more limiting. You provide a transformation of the data into a line-oriented text format, and git uses its regular diff tools to generate the output. There are several advantages to choosing this method:

Git usually guesses correctly whether a blob contains text or binary data by examining the beginning of the contents. However, sometimes you may want to override its decision, either because a blob contains binary data later in the file, or because the content, while technically composed of text characters, is opaque to a human reader. For example, many postscript files contain only ascii characters, but produce noisy and meaningless diffs.

The simplest way to mark a file as binary is to unset the diff attribute in the .gitattributes file:

This will cause git to generate Binary files differ (or a binary patch, if binary patches are enabled) instead of a regular diff.

However, one may also want to specify other diff driver attributes. For example, you might want to use textconv to convert postscript files to an ascii representation for human viewing, but otherwise treat them as binary files. You cannot specify both -diff and diff=ps attributes. The solution is to use the diff.*.binary config option:

The attribute merge affects how three versions of a file are merged when a file-level merge is necessary during git merge, and other commands such as git revert and git cherry-pick.

There are a few built-in low-level merge drivers defined that can be asked for via the merge attribute.

The definition of a merge driver is done in the .git/config file, not in the gitattributes file, so strictly speaking this manual page is a wrong place to talk about it. However…

To define a custom merge driver filfre, add a section to your $GIT_DIR/config file (or $HOME/.gitconfig file) like this:

The merge.*.name variable gives the driver a human-readable name.

The ‘merge.*.driver` variable’s value is used to construct a command to run to merge ancestor’s version (%O), current version (%A) and the other branches’ version (%B). These three tokens are replaced with the names of temporary files that hold the contents of these versions when the command line is built. Additionally, %L will be replaced with the conflict marker size (see below).

The merge driver is expected to leave the result of the merge in the file named with %A by overwriting it, and exit with zero status if it managed to merge them cleanly, or non-zero if there were conflicts.

The merge.*.recursive variable specifies what other merge driver to use when the merge driver is called for an internal merge between common ancestors, when there are more than one. When left unspecified, the driver itself is used for both internal merge and the final merge.

This attribute controls the length of conflict markers left in the work tree file during a conflicted merge. Only setting to the value to a positive integer has any meaningful effect.

For example, this line in .gitattributes can be used to tell the merge machinery to leave much longer (instead of the usual 7-character-long) conflict markers when merging the file Documentation/git-merge.txt results in a conflict.

The core.whitespace configuration variable allows you to define what diff and apply should consider whitespace errors for all paths in the project (See git-config(1)). This attribute gives you finer control per path.

Files and directories with the attribute export-ignore won’t be added to archive files.

If the attribute export-subst is set for a file then git will expand several placeholders when adding this file to an archive. The expansion depends on the availability of a commit ID, i.e., if git-archive(1) has been given a tree instead of a commit or a tag then no replacement will be done. The placeholders are the same as those for the option --pretty=format: of git-log(1), except that they need to be wrapped like this: $Format:PLACEHOLDERS$ in the file. E.g. the string $Format:%H$ will be replaced by the commit hash.

Delta compression will not be attempted for blobs for paths with the attribute delta set to false.

The value of this attribute specifies the character encoding that should be used by GUI tools (e.g. gitk(1) and git-gui(1)) to display the contents of the relevant file. Note that due to performance considerations gitk(1) does not use this attribute unless you manually enable per-file encodings in its options.

If this attribute is not set or has an invalid value, the value of the gui.encoding configuration variable is used instead (See git-config(1)).

You do not want any end-of-line conversions applied to, nor textual diffs produced for, any binary file you track. You would need to specify e.g.

but that may become cumbersome, when you have many attributes. Using macro attributes, you can define an attribute that, when set, also sets or unsets a number of other attributes at the same time. The system knows a built-in macro attribute, binary:

Setting the "binary" attribute also unsets the "text" and "diff" attributes as above. Note that macro attributes can only be "Set", though setting one might have the effect of setting or unsetting other attributes or even returning other attributes to the "Unspecified" state.

Custom macro attributes can be defined only in the .gitattributes file at the toplevel (i.e. not in any subdirectory). The built-in macro attribute "binary" is equivalent to:

If you have these three gitattributes file:

the attributes given to path t/abc are computed as follows:

As the result, the attributes assignment to t/abc becomes:

git-check-attr(1).

Part of the git(1) suite