commit eb5d955823b582625d7f157125ea55e6ac1b60e4
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu Jul 9 09:35:57 2020 +0200
Linux 4.9.230
commit 1535f26e259dc07209f0a07bda369311ade5951b
Author: Peter Jones <pjones@redhat.com>
Date: Mon Jun 15 16:24:08 2020 -0400
efi: Make it possible to disable efivar_ssdt entirely
commit 435d1a471598752446a72ad1201b3c980526d869 upstream.
In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options. Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.
This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 396ba2fc4f27ef6c44bbc0098bfddf4da76dc4c9
Author: Vasily Averin <vvs@virtuozzo.com>
Date: Tue Jun 9 10:53:22 2020 +0300
netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6
Could you please push this patch into stable@?
it fixes memory corruption in kernels v3.5 .. v4.10
Lost .data_len definition leads to write beyond end of
struct nf_ct_h323_master. Usually it corrupts following
struct nf_conn_nat, however if nat is not loaded it corrupts
following slab object.
In mainline this problem went away in v4.11,
after commit 9f0f3ebeda47 ("netfilter: helpers: remove data_len usage
for inkernel helpers") however many stable kernels are still affected.
Fixes: 1afc56794e03 ("netfilter: nf_ct_helper: implement variable length helper private data") # v3.5
cc: stable@vger.kernel.org
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd54eb64ba65370b1abb1c689bd2e235bcd94284
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri Jul 3 00:53:34 2020 +0200
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream.
This resolves the hazard between the mtc0 in the change_c0_status() and
the mfc0 in configure_exception_vector(). Without resolving this hazard
configure_exception_vector() could read an old value and would restore
this old value again. This would revert the changes change_c0_status()
did. I checked this by printing out the read_c0_status() at the end of
per_cpu_trap_init() and the ST0_MX is not set without this patch.
The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:
Producer | Consumer | Hazard
----------|----------|----------------------------
mtc0 | mfc0 | any coprocessor 0 register
I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
There the change_c0_status() function would activate the DSPen by
setting ST0_MX in the c0_status register. This was reverted and then the
system got a DSP exception when the DSP registers were saved in
save_dsp() in the first process switch. The crash looks like this:
[ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.107070] Kernel panic - not syncing: Unexpected DSP exception
[ 0.113470] Rebooting in 1 seconds..
We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
did not happen.
In the kernel I bisected this problem to commit 9012d011660e ("compiler:
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
reverted it also happened after commit 172dcd935c34b ("MIPS: Always
allocate exception vector for MIPSr2+").
Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
does similar changes to a different file. I am not sure if there are
more places affected by this problem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28f47e06af791079bc00d0daf6b8521ce2cf0bf9
Author: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Date: Sun Jun 28 21:06:38 2020 -0400
cifs: Fix the target file was deleted when rename failed.
commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream.
When xfstest generic/035, we found the target file was deleted
if the rename return -EACESS.
In cifs_rename2, we unlink the positive target dentry if rename
failed with EACESS or EEXIST, even if the target dentry is positived
before rename. Then the existing file was deleted.
We should just delete the target file which created during the
rename.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c3356591713ba1768d2cad3f8ac234a3f903cb0
Author: Paul Aurich <paul@darkrain42.org>
Date: Fri Jun 26 12:58:06 2020 -0700
SMB3: Honor persistent/resilient handle flags for multiuser mounts
commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream.
Without this:
- persistent handles will only be enabled for per-user tcons if the
server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 063a6248f23ebe38499be8b7914051c697048a97
Author: Paul Aurich <paul@darkrain42.org>
Date: Fri Jun 26 12:58:05 2020 -0700
SMB3: Honor 'seal' flag for multiuser mounts
commit cc15461c73d7d044d56c47e869a215e49bd429c8 upstream.
Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab0b5e92fc36ee82c1bd01fe896d0f775ed5de41
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Tue Jul 7 14:42:38 2020 +0200
Revert "ALSA: usb-audio: Improve frames size computation"
This reverts commit 5ef30e443e6d3654cccecec99cf481a69a0a6d3b which is
commit f0bd62b64016508938df9babe47f65c2c727d25c upstream.
It causes a number of reported issues and a fix for it has not hit
Linus's tree yet. Revert this to resolve those problems.
Cc: Alexander Tsoy <alexander@tsoy.me>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac518a2693859c74e5e78ee800d795d16c16743a
Author: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: Thu Jul 2 10:39:11 2020 +1200
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
[ Upstream commit cd217f2300793a106b49c7dfcbfb26e348bc7593 ]
The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck
low, this differs to the PCA9564 which uses 90h for this indication.
Treat either 0x78 or 0x90 as an indication that the SCL line is stuck.
Based on looking through the PCA9564 and PCA9665 datasheets this should
be safe for both chips. The PCA9564 should not return 0x78 for any valid
state and the PCA9665 should not return 0x90.
Fixes: eff9ec95efaa ("i2c-algo-pca: Add PCA9665 support")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0733b1a2be5daea27c48da09dc02f6d015b92312
Author: Hou Tao <houtao1@huawei.com>
Date: Mon Jun 15 12:14:59 2020 +0800
virtio-blk: free vblk-vqs in error path of virtblk_probe()
[ Upstream commit e7eea44eefbdd5f0345a0a8b80a3ca1c21030d06 ]
Else there will be memory leak if alloc_disk() fails.
Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a56fe733f4b7db8d909faa23f82afdd23ea9822f
Author: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Date: Thu Jun 25 13:32:42 2020 +0900
hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()
[ Upstream commit 8b97f9922211c44a739c5cbd9502ecbb9f17f6d1 ]
Although it rarely happens, we should call free_capabilities()
if error happens after read_capabilities() to free allocated strings.
Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 25c99651712a17cd34da036498691cdf77c80a32
Author: Chu Lin <linchuyuan@google.com>
Date: Tue Jun 23 22:13:08 2020 +0000
hwmon: (max6697) Make sure the OVERT mask is set correctly
[ Upstream commit 016983d138cbe99a5c0aaae0103ee88f5300beb3 ]
Per the datasheet for max6697, OVERT mask and ALERT mask are different.
For example, the 7th bit of OVERT is the local channel but for alert
mask, the 6th bit is the local channel. Therefore, we can't apply the
same mask for both registers. In addition to that, the max6697 driver
is supposed to be compatibale with different models. I manually went over
all the listed chips and made sure all chip types have the same layout.
Testing;
mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT.
I used iotool to read the reg value back to verify. I only tested this
change on max6581.
Reference:
https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf
https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf
https://datasheets.maximintegrated.com/en/ds/MAX6699.pdf
Signed-off-by: Chu Lin <linchuyuan@google.com>
Fixes: 5372d2d71c46e ("hwmon: Driver for Maxim MAX6697 and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 69d3042df6648ab5af973189edb380864b470d3c
Author: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Date: Wed Jun 24 01:51:34 2020 +0530
cxgb4: parse TC-U32 key values and masks natively
[ Upstream commit 27f78cb245abdb86735529c13b0a579f57829e71 ]
TC-U32 passes all keys values and masks in __be32 format. The parser
already expects this and hence pass the value and masks in __be32
natively to the parser.
Fixes following sparse warnings in several places:
cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base
types)
cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val
cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val
cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32
Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0c199348cfafce98e570a6934d6ca0737edebce6
Author: Shile Zhang <shile.zhang@nokia.com>
Date: Sat Jan 28 22:00:49 2017 +0800
sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds
[ Upstream commit 975e155ed8732cb81f55c021c441ae662dd040b5 ]
We added the 'sched_rr_timeslice_ms' SCHED_RR tuning knob in this commit:
ce0dbbbb30ae ("sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice")
... which name suggests to users that it's in milliseconds, while in reality
it's being set in milliseconds but the result is shown in jiffies.
This is obviously confusing when HZ is not 1000, it makes it appear like the
value set failed, such as HZ=100:
root# echo 100 > /proc/sys/kernel/sched_rr_timeslice_ms
root# cat /proc/sys/kernel/sched_rr_timeslice_ms
10
Fix this to be milliseconds all around.
Signed-off-by: Shile Zhang <shile.zhang@nokia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1485612049-20923-1-git-send-email-shile.zhang@nokia.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 04d462a6f4138c2ee05a16056bcc74b679be9ce2
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon Jun 8 16:48:43 2020 +1000
crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock()
commit 34c86f4c4a7be3b3e35aa48bd18299d4c756064d upstream.
The locking in af_alg_release_parent is broken as the BH socket
lock can only be taken if there is a code-path to handle the case
where the lock is owned by process-context. Instead of adding
such handling, we can fix this by changing the ref counts to
atomic_t.
This patch also modifies the main refcnt to include both normal
and nokey sockets. This way we don't have to fudge the nokey
ref count when a socket changes from nokey to normal.
Credits go to Mauricio Faria de Oliveira who diagnosed this bug
and sent a patch for it:
https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/
Reported-by: Brian Moyles <bmoyles@netflix.com>
Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Fixes: 37f96694cf73 ("crypto: af_alg - Use bh_lock_sock in...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2968445b3d802690bee3e606db432c439c896e42
Author: Douglas Anderson <dianders@chromium.org>
Date: Tue Jun 2 15:47:39 2020 -0700
kgdb: Avoid suspicious RCU usage warning
[ Upstream commit 440ab9e10e2e6e5fd677473ee6f9e3af0f6904d6 ]
At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage. I managed to come up with a case that could
reproduce this that looked like this:
WARNING: suspicious RCU usage
5.7.0-rc4+ #609 Not tainted
-----------------------------
kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by swapper/0/1:
#0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
#1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
#2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac
stack backtrace:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
dump_backtrace+0x0/0x1b8
show_stack+0x1c/0x24
dump_stack+0xd4/0x134
lockdep_rcu_suspicious+0xf0/0x100
find_task_by_pid_ns+0x5c/0x80
getthread+0x8c/0xb0
gdb_serial_stub+0x9d4/0xd04
kgdb_cpu_enter+0x284/0x7ac
kgdb_handle_exception+0x174/0x20c
kgdb_brk_fn+0x24/0x30
call_break_hook+0x6c/0x7c
brk_handler+0x20/0x5c
do_debug_exception+0x1c8/0x22c
el1_sync_handler+0x3c/0xe4
el1_sync+0x7c/0x100
rpmh_rsc_probe+0x38/0x420
platform_drv_probe+0x94/0xb4
really_probe+0x134/0x300
driver_probe_device+0x68/0x100
__device_attach_driver+0x90/0xa8
bus_for_each_drv+0x84/0xcc
__device_attach+0xb4/0x13c
device_initial_probe+0x18/0x20
bus_probe_device+0x38/0x98
device_add+0x38c/0x420
If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away. We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().
With this I no longer get any splats and things seem to work fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ea5c9091d62e9516819c7bcb7c09658bde85acc
Author: Zqiang <qiang.zhang@windriver.com>
Date: Fri Jun 12 11:52:10 2020 +0800
usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect
[ Upstream commit 28ebeb8db77035e058a510ce9bd17c2b9a009dba ]
BUG: memory leak
unreferenced object 0xffff888055046e00 (size 256):
comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s)
hex dump (first 32 bytes):
00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff .p.U......Z.....
f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff ..x.....7.......
backtrace:
[<00000000d121dccf>] kmemleak_alloc_recursive
include/linux/kmemleak.h:43 [inline]
[<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline]
[<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline]
[<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline]
[<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811
[<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline]
[<000000005c3c3381>] usbtest_probe+0x286/0x19d0
drivers/usb/misc/usbtest.c:2790
[<000000001cec6910>] usb_probe_interface+0x2bd/0x870
drivers/usb/core/driver.c:361
[<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551
[<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724
[<000000003ef66004>] __device_attach_driver+0x1b6/0x240
drivers/base/dd.c:831
[<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431
[<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897
[<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944
[<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491
[<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504
[<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0
drivers/usb/core/message.c:2030
[<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210
[<0000000098ade0f1>] usb_probe_device+0x90/0xd0
drivers/usb/core/driver.c:266
[<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551
[<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20200612035210.20494-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ba9950ac9c3623e5d7ac3f78fc99a3b8aa0ebaec
Author: Qian Cai <cai@lca.pw>
Date: Mon Jun 1 21:45:57 2020 -0700
mm/slub: fix stack overruns with SLUB_STATS
[ Upstream commit a68ee0573991e90af2f1785db309206408bad3e5 ]
There is no need to copy SLUB_STATS items from root memcg cache to new
memcg cache copies. Doing so could result in stack overruns because the
store function only accepts 0 to clear the stat and returns an error for
everything else while the show method would print out the whole stat.
Then, the mismatch of the lengths returns from show and store methods
happens in memcg_propagate_slab_attrs():
else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
buf = mbuf;
max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64]
in show_stat() later where a bounch of sprintf() would overrun the stack
variable. Fix it by always allocating a page of buffer to be used in
show_stat() if SLUB_STATS=y which should only be used for debug purpose.
# echo 1 > /sys/kernel/slab/fs_cache/shrink
BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0
Write of size 1 at addr ffffc900256cfde0 by task kworker/76:0/53251
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
Call Trace:
number+0x421/0x6e0
vsnprintf+0x451/0x8e0
sprintf+0x9e/0xd0
show_stat+0x124/0x1d0
alloc_slowpath_show+0x13/0x20
__kmem_cache_create+0x47a/0x6b0
addr ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame:
process_one_work+0x0/0xb90
this frame has 1 object:
[32, 72) 'lockdep_map'
Memory state around the buggy address:
ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
^
ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00
ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0
Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
Call Trace:
__kmem_cache_create+0x6ac/0x6b0
Fixes: 107dab5c92d5 ("slub: slub-specific propagation changes")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200429222356.4322-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 96b0120962e18b529d4cd9041cf4687980bc9316
Author: Dongli Zhang <dongli.zhang@oracle.com>
Date: Mon Jun 1 21:45:47 2020 -0700
mm/slub.c: fix corrupted freechain in deactivate_slab()
[ Upstream commit 52f23478081ae0dcdb95d1650ea1e7d52d586829 ]
The slub_debug is able to fix the corrupted slab freelist/page.
However, alloc_debug_processing() only checks the validity of current
and next freepointer during allocation path. As a result, once some
objects have their freepointers corrupted, deactivate_slab() may lead to
page fault.
Below is from a test kernel module when 'slub_debug=PUF,kmalloc-128
slub_nomerge'. The test kernel corrupts the freepointer of one free
object on purpose. Unfortunately, deactivate_slab() does not detect it
when iterating the freechain.
BUG: unable to handle page fault for address: 00000000123456f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
... ...
RIP: 0010:deactivate_slab.isra.92+0xed/0x490
... ...
Call Trace:
___slab_alloc+0x536/0x570
__slab_alloc+0x17/0x30
__kmalloc+0x1d9/0x200
ext4_htree_store_dirent+0x30/0xf0
htree_dirblock_to_tree+0xcb/0x1c0
ext4_htree_fill_tree+0x1bc/0x2d0
ext4_readdir+0x54f/0x920
iterate_dir+0x88/0x190
__x64_sys_getdents+0xa6/0x140
do_syscall_64+0x49/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Therefore, this patch adds extra consistency check in deactivate_slab().
Once an object's freepointer is corrupted, all following objects
starting at this object are isolated.
[akpm@linux-foundation.org: fix build with CONFIG_SLAB_DEBUG=n]
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200331031450.12182-1-dongli.zhang@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3cc5b83185ba0f90c1f831ce42a4065f159a881f
Author: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Date: Sun Jun 21 13:43:26 2020 +0300
usbnet: smsc95xx: Fix use-after-free after removal
[ Upstream commit b835a71ef64a61383c414d6bf2896d2c0161deca ]
Syzbot reports an use-after-free in workqueue context:
BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737
mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737
__smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline]
smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278
check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644
process_one_work+0x777/0xf90 kernel/workqueue.c:2274
worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420
kthread+0x2df/0x300 kernel/kthread.c:255
It looks like that smsc95xx_unbind() is freeing the structures that are
still in use by the concurrently running workqueue callback. Thus switch
to using cancel_delayed_work_sync() to ensure the work callback really
is no longer active.
Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5960439a078501a0ee0947534ca66ed18a3ea26e
Author: Borislav Petkov <bp@suse.de>
Date: Thu Jun 18 20:25:25 2020 +0200
EDAC/amd64: Read back the scrub rate PCI register on F15h
[ Upstream commit ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 ]
Commit:
da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")
added support for F15h, model 0x60 CPUs but in doing so, missed to read
back SCRCTRL PCI config register on F15h CPUs which are *not* model
0x60. Add that read so that doing
$ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate
can show the previously set DRAM scrub rate.
Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")
Reported-by: Anders Andersson <pipatron@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> #v4.4..
Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b647889f050cf359db6b5f3a469b3178c7d9e7da
Author: Hugh Dickins <hughd@google.com>
Date: Thu Jun 25 20:29:59 2020 -0700
mm: fix swap cache node allocation mask
[ Upstream commit 243bce09c91b0145aeaedd5afba799d81841c030 ]
Chris Murphy reports that a slightly overcommitted load, testing swap
and zram along with i915, splats and keeps on splatting, when it had
better fail less noisily:
gnome-shell: page allocation failure: order:0,
mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1
Call Trace:
dump_stack+0x64/0x88
warn_alloc.cold+0x75/0xd9
__alloc_pages_slowpath.constprop.0+0xcfa/0xd30
__alloc_pages_nodemask+0x2df/0x320
alloc_slab_page+0x195/0x310
allocate_slab+0x3c5/0x440
___slab_alloc+0x40c/0x5f0
__slab_alloc+0x1c/0x30
kmem_cache_alloc+0x20e/0x220
xas_nomem+0x28/0x70
add_to_swap_cache+0x321/0x400
__read_swap_cache_async+0x105/0x240
swap_cluster_readahead+0x22c/0x2e0
shmem_swapin+0x8e/0xc0
shmem_swapin_page+0x196/0x740
shmem_getpage_gfp+0x3a2/0xa60
shmem_read_mapping_page_gfp+0x32/0x60
shmem_get_pages+0x155/0x5e0 [i915]
__i915_gem_object_get_pages+0x68/0xa0 [i915]
i915_vma_pin+0x3fe/0x6c0 [i915]
eb_add_vma+0x10b/0x2c0 [i915]
i915_gem_do_execbuffer+0x704/0x3430 [i915]
i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915]
drm_ioctl_kernel+0x86/0xd0 [drm]
drm_ioctl+0x206/0x390 [drm]
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5b/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported on 5.7, but it goes back really to 3.1: when
shmem_read_mapping_page_gfp() was implemented for use by i915, and
allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but
missed swapin's "& GFP_KERNEL" mask for page tree node allocation in
__read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits
from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils
Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Chris Murphy <lists@colorremedies.com>
Analyzed-by: Vlastimil Babka <vbabka@suse.cz>
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Chris Murphy <lists@colorremedies.com>
Cc: <stable@vger.kernel.org> [3.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b6a357f58949caaa2418fe8c665f15f23863fef8
Author: Filipe Manana <fdmanana@suse.com>
Date: Mon Jun 8 13:32:55 2020 +0100
btrfs: fix data block group relocation failure due to concurrent scrub
[ Upstream commit 432cd2a10f1c10cead91fe706ff5dc52f06d642a ]
When running relocation of a data block group while scrub is running in
parallel, it is possible that the relocation will fail and abort the
current transaction with an -EINVAL error:
[134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents
[134243.999871] ------------[ cut here ]------------
[134244.000741] BTRFS: Transaction aborted (error -22)
[134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs]
[134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...)
[134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #5
[134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs]
[134244.017151] Code: 48 c7 c7 (...)
[134244.020549] RSP: 0018:ffffa41607863888 EFLAGS: 00010286
[134244.021515] RAX: 0000000000000000 RBX: ffff9614bdfe09c8 RCX: 0000000000000000
[134244.022822] RDX: 0000000000000001 RSI: ffffffffb3d63980 RDI: 0000000000000001
[134244.024124] RBP: ffff961589e8c000 R08: 0000000000000000 R09: 0000000000000001
[134244.025424] R10: ffffffffc0ae5955 R11: 0000000000000000 R12: ffff9614bd530d08
[134244.026725] R13: ffff9614ced41b88 R14: ffff9614bdfe2a48 R15: 0000000000000000
[134244.028024] FS: 00007f29b63c08c0(0000) GS:ffff9615ba600000(0000) knlGS:0000000000000000
[134244.029491] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[134244.030560] CR2: 00007f4eb339b000 CR3: 0000000130d6e006 CR4: 00000000003606f0
[134244.031997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[134244.033153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[134244.034484] Call Trace:
[134244.034984] btrfs_cow_block+0x12b/0x2b0 [btrfs]
[134244.035859] do_relocation+0x30b/0x790 [btrfs]
[134244.036681] ? do_raw_spin_unlock+0x49/0xc0
[134244.037460] ? _raw_spin_unlock+0x29/0x40
[134244.038235] relocate_tree_blocks+0x37b/0x730 [btrfs]
[134244.039245] relocate_block_group+0x388/0x770 [btrfs]
[134244.040228] btrfs_relocate_block_group+0x161/0x2e0 [btrfs]
[134244.041323] btrfs_relocate_chunk+0x36/0x110 [btrfs]
[134244.041345] btrfs_balance+0xc06/0x1860 [btrfs]
[134244.043382] ? btrfs_ioctl_balance+0x27c/0x310 [btrfs]
[134244.045586] btrfs_ioctl_balance+0x1ed/0x310 [btrfs]
[134244.045611] btrfs_ioctl+0x1880/0x3760 [btrfs]
[134244.049043] ? do_raw_spin_unlock+0x49/0xc0
[134244.049838] ? _raw_spin_unlock+0x29/0x40
[134244.050587] ? __handle_mm_fault+0x11b3/0x14b0
[134244.051417] ? ksys_ioctl+0x92/0xb0
[134244.052070] ksys_ioctl+0x92/0xb0
[134244.052701] ? trace_hardirqs_off_thunk+0x1a/0x1c
[134244.053511] __x64_sys_ioctl+0x16/0x20
[134244.054206] do_syscall_64+0x5c/0x280
[134244.054891] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[134244.055819] RIP: 0033:0x7f29b51c9dd7
[134244.056491] Code: 00 00 00 (...)
[134244.059767] RSP: 002b:00007ffcccc1dd08 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[134244.061168] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f29b51c9dd7
[134244.062474] RDX: 00007ffcccc1dda0 RSI: 00000000c4009420 RDI: 0000000000000003
[134244.063771] RBP: 0000000000000003 R08: 00005565cea4b000 R09: 0000000000000000
[134244.065032] R10: 0000000000000541 R11: 0000000000000202 R12: 00007ffcccc2060a
[134244.066327] R13: 00007ffcccc1dda0 R14: 0000000000000002 R15: 00007ffcccc1dec0
[134244.067626] irq event stamp: 0
[134244.068202] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[134244.069351] hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134244.070909] softirqs last enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134244.072392] softirqs last disabled at (0): [<0000000000000000>] 0x0
[134244.073432] ---[ end trace bd7c03622e0b0a99 ]---
The -EINVAL error comes from the following chain of function calls:
__btrfs_cow_block() <-- aborts the transaction
btrfs_reloc_cow_block()
replace_file_extents()
get_new_location() <-- returns -EINVAL
When relocating a data block group, for each allocated extent of the block
group, we preallocate another extent (at prealloc_file_extent_cluster()),
associated with the data relocation inode, and then dirty all its pages.
These preallocated extents have, and must have, the same size that extents
from the data block group being relocated have.
Later before we start the relocation stage that updates pointers (bytenr
field of file extent items) to point to the the new extents, we trigger
writeback for the data relocation inode. The expectation is that writeback
will write the pages to the previously preallocated extents, that it
follows the NOCOW path. That is generally the case, however, if a scrub
is running it may have turned the block group that contains those extents
into RO mode, in which case writeback falls back to the COW path.
However in the COW path instead of allocating exactly one extent with the
expected size, the allocator may end up allocating several smaller extents
due to free space fragmentation - because we tell it at cow_file_range()
that the minimum allocation size can match the filesystem's sector size.
This later breaks the relocation's expectation that an extent associated
to a file extent item in the data relocation inode has the same size as
the respective extent pointed by a file extent item in another tree - in
this case the extent to which the relocation inode poins to is smaller,
causing relocation.c:get_new_location() to return -EINVAL.
For example, if we are relocating a data block group X that has a logical
address of X and the block group has an extent allocated at the logical
address X + 128KiB with a size of 64KiB:
1) At prealloc_file_extent_cluster() we allocate an extent for the data
relocation inode with a size of 64KiB and associate it to the file
offset 128KiB (X + 128KiB - X) of the data relocation inode. This
preallocated extent was allocated at block group Z;
2) A scrub running in parallel turns block group Z into RO mode and
starts scrubing its extents;
3) Relocation triggers writeback for the data relocation inode;
4) When running delalloc (btrfs_run_delalloc_range()), we try first the
NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC
set in its flags. However, because block group Z is in RO mode, the
NOCOW path (run_delalloc_nocow()) falls back into the COW path, by
calling cow_file_range();
5) At cow_file_range(), in the first iteration of the while loop we call
btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum
allocation size of 4KiB (fs_info->sectorsize). Due to free space
fragmentation, btrfs_reserve_extent() ends up allocating two extents
of 32KiB each, each one on a different iteration of that while loop;
6) Writeback of the data relocation inode completes;
7) Relocation proceeds and ends up at relocation.c:replace_file_extents(),
with a leaf which has a file extent item that points to the data extent
from block group X, that has a logical address (bytenr) of X + 128KiB
and a size of 64KiB. Then it calls get_new_location(), which does a
lookup in the data relocation tree for a file extent item starting at
offset 128KiB (X + 128KiB - X) and belonging to the data relocation
inode. It finds a corresponding file extent item, however that item
points to an extent that has a size of 32KiB, which doesn't match the
expected size of 64KiB, resuling in -EINVAL being returned from this
function and propagated up to __btrfs_cow_block(), which aborts the
current transaction.
To fix this make sure that at cow_file_range() when we call the allocator
we pass it a minimum allocation size corresponding the desired extent size
if the inode belongs to the data relocation tree, otherwise pass it the
filesystem's sector size as the minimum allocation size.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8714d9b4aed89a8cc45b5cff778e2ef1c91e0d5d
Author: Anand Jain <Anand.Jain@oracle.com>
Date: Thu Feb 15 12:29:38 2018 +0800
btrfs: cow_file_range() num_bytes and disk_num_bytes are same
[ Upstream commit 3752d22fcea160cc2493e34f5e0e41cdd7fdd921 ]
This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a39010dcd31675401fd355924f1e7a3f63b57b8c
Author: Filipe Manana <fdmanana@suse.com>
Date: Mon Jun 1 19:12:06 2020 +0100
btrfs: fix a block group ref counter leak after failure to remove block group
[ Upstream commit 9fecd13202f520f3f25d5b1c313adb740fe19773 ]
When removing a block group, if we fail to delete the block group's item
from the extent tree, we jump to the 'out' label and end up decrementing
the block group's reference count once only (by 1), resulting in a counter
leak because the block group at that point was already removed from the
block group cache rbtree - so we have to decrement the reference count
twice, once for the rbtree and once for our lookup at the start of the
function.
There is a second bug where if removing the free space tree entries (the
call to remove_block_group_free_space()) fails we end up jumping to the
'out_put_group' label but end up decrementing the reference count only
once, when we should have done it twice, since we have already removed
the block group from the block group cache rbtree. This happens because
the reference count decrement for the rbtree reference happens after
attempting to remove the free space tree entries, which is far away from
the place where we remove the block group from the rbtree.
To make things less error prone, decrement the reference count for the
rbtree immediately after removing the block group from it. This also
eleminates the need for two different exit labels on error, renaming
'out_put_label' to just 'out' and removing the old 'out'.
Fixes: f6033c5e333238 ("btrfs: fix block group leak when removing fails")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>