commit 9e48f0c28dd505e39bd136ec92a042b311b127c6
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Tue Oct 29 09:15:27 2019 +0100
Linux 4.9.198
commit 84f5b67df81a9f333afa81855f6fa3fdcd954463
Author: Greg KH <gregkh@linuxfoundation.org>
Date: Tue Oct 1 18:56:11 2019 +0200
RDMA/cxgb4: Do not dma memory off of the stack
commit 3840c5b78803b2b6cc1ff820100a74a092c40cbb upstream.
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack,
which is generally considered a very bad thing. On some architectures it
could be a security problem, but odds are none of them actually run this
driver, so it's just a "normal" bug.
Resolve this by allocating the memory for a message off of the heap
instead of the stack. kmalloc() always will give us a proper memory
location that DMA will work correctly from.
Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com
Reported-by: Nicolas Waisman <nico@semmle.com>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45156a8303266fe29375e677713522cb1ab99fa5
Author: Ajay Kaher <akaher@vmware.com>
Date: Wed Oct 16 14:33:54 2019 +0530
Revert "net: sit: fix memory leak in sit_init_net()"
This reverts commit 375d6d454a95ebacb9c6eb0b715da05a4458ffef which is
commit 07f12b26e21ab359261bf75cfcb424fdc7daeb6d upstream.
Unnecessarily calling free_netdev() from sit_init_net().
ipip6_dev_free() of 4.9.y called free_netdev(), so no need
to call again after ipip6_dev_free().
Cc: Mao Wenan <maowenan@huawei.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Reviewed-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ee3376d779f35f29fd3757be41a0a16e83bdd95
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Mon Oct 14 13:25:00 2019 +0200
PCI: PM: Fix pci_power_up()
commit 45144d42f299455911cc29366656c7324a3a7c97 upstream.
There is an arbitrary difference between the system resume and
runtime resume code paths for PCI devices regarding the delay to
apply when switching the devices from D3cold to D0.
Namely, pci_restore_standard_config() used in the runtime resume
code path calls pci_set_power_state() which in turn invokes
__pci_start_power_transition() to power up the device through the
platform firmware and that function applies the transition delay
(as per PCI Express Base Specification Revision 2.0, Section 6.6.1).
However, pci_pm_default_resume_early() used in the system resume
code path calls pci_power_up() which doesn't apply the delay at
all and that causes issues to occur during resume from
suspend-to-idle on some systems where the delay is required.
Since there is no reason for that difference to exist, modify
pci_power_up() to follow pci_set_power_state() more closely and
invoke __pci_start_power_transition() from there to call the
platform firmware to power up the device (in case that's necessary).
Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Reported-by: Daniel Drake <drake@endlessm.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f119ae5eefb0aa84af07972586c7aa1b4a78c7d
Author: Juergen Gross <jgross@suse.com>
Date: Fri Oct 18 09:45:49 2019 +0200
xen/netback: fix error path of xenvif_connect_data()
commit 3d5c1a037d37392a6859afbde49be5ba6a70a6b3 upstream.
xenvif_connect_data() calls module_put() in case of error. This is
wrong as there is no related module_get().
Remove the superfluous module_put().
Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down")
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ccf3b8b7a12dc9da158c2e699c36d04b2496944
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Oct 9 01:29:10 2019 +0200
cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown
commit 65650b35133ff20f0c9ef0abd5c3c66dbce3ae57 upstream.
It is incorrect to set the cpufreq syscore shutdown callback pointer
to cpufreq_suspend(), because that function cannot be run in the
syscore stage of system shutdown for two reasons: (a) it may attempt
to carry out actions depending on devices that have already been shut
down at that point and (b) the RCU synchronization carried out by it
may not be able to make progress then.
The latter issue has been present since commit 45975c7d21a1 ("rcu:
Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"),
but the former one has been there since commit 90de2a4aa9f3 ("cpufreq:
suspend cpufreq governors on shutdown") regardless.
Fix that by dropping cpufreq_syscore_ops altogether and making
device_shutdown() call cpufreq_suspend() directly before shutting
down devices, which is along the lines of what system-wide power
management does.
Fixes: 45975c7d21a1 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds")
Fixes: 90de2a4aa9f3 ("cpufreq: suspend cpufreq governors on shutdown")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3477314df84152e1222b795d7227767e746d85f4
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sat Oct 5 13:21:01 2019 +0200
memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()'
commit 28c9fac09ab0147158db0baeec630407a5e9b892 upstream.
If 'jmb38x_ms_count_slots()' returns 0, we must undo the previous
'pci_request_regions()' call.
Goto 'err_out_int' to fix it.
Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 615e9f196d9e829a734a8a78aa0c52dcd4657557
Author: Qu Wenruo <wqu@suse.com>
Date: Thu Oct 10 10:39:26 2019 +0800
btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()
commit 4b654acdae850f48b8250b9a578a4eaa518c7a6f upstream.
In btrfs_read_block_groups(), if we have an invalid block group which
has mixed type (DATA|METADATA) while the fs doesn't have MIXED_GROUPS
feature, we error out without freeing the block group cache.
This patch will add the missing btrfs_put_block_group() to prevent
memory leak.
Note for stable backports: the file to patch in versions <= 5.3 is
fs/btrfs/extent-tree.c
Fixes: 49303381f19a ("Btrfs: bail out if block group has different mixed flag")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 605387c7c69972a5b9b53571e01a4825e2affe08
Author: Roberto Bergantinos Corpas <rbergant@redhat.com>
Date: Mon Oct 14 10:59:23 2019 +0200
CIFS: avoid using MID 0xFFFF
commit 03d9a9fe3f3aec508e485dd3dcfa1e99933b4bdb upstream.
According to MS-CIFS specification MID 0xFFFF should not be used by the
CIFS client, but we actually do. Besides, this has proven to cause races
leading to oops between SendReceive2/cifs_demultiplex_thread. On SMB1,
MID is a 2 byte value easy to reach in CurrentMid which may conflict with
an oplock break notification request coming from server
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 088f75885bb41dd587af216f0b4b070f239dc0bf
Author: Helge Deller <deller@gmx.de>
Date: Fri Oct 4 19:23:37 2019 +0200
parisc: Fix vmap memory leak in ioremap()/iounmap()
commit 513f7f747e1cba81f28a436911fba0b485878ebd upstream.
Sven noticed that calling ioremap() and iounmap() multiple times leads
to a vmap memory leak:
vmap allocation for size 4198400 failed:
use vmalloc=<size> to increase size
It seems we missed calling vunmap() in iounmap().
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d53ef7bc7fa151e4e23c3ff92cfcdb226de9fda
Author: Max Filippov <jcmvbkbc@gmail.com>
Date: Mon Oct 14 15:48:19 2019 -0700
xtensa: drop EXPORT_SYMBOL for outs*/ins*
commit 8b39da985194aac2998dd9e3a22d00b596cebf1e upstream.
Custom outs*/ins* implementations are long gone from the xtensa port,
remove matching EXPORT_SYMBOLs.
This fixes the following build warnings issued by modpost since commit
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"):
WARNING: "insb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsl" [vmlinux] is a static EXPORT_SYMBOL
Cc: stable@vger.kernel.org
Fixes: d38efc1f150f ("xtensa: adopt generic io routines")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f60a605aa56e491a917f0ef1a4bbda803e2f8fef
Author: Qian Cai <cai@lca.pw>
Date: Mon Oct 14 14:11:51 2019 -0700
mm/slub: fix a deadlock in show_slab_objects()
commit e4f8e513c3d353c134ad4eef9fd0bba12406c7c8 upstream.
A long time ago we fixed a similar deadlock in show_slab_objects() [1].
However, it is apparently due to the commits like 01fb58bcba63 ("slab:
remove synchronous synchronize_sched() from memcg cache deactivation
path") and 03afc0e25f7f ("slab: get_online_mems for
kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by
just reading files in /sys/kernel/slab which will generate a lockdep
splat below.
Since the "mem_hotplug_lock" here is only to obtain a stable online node
mask while racing with NUMA node hotplug, in the worst case, the results
may me miscalculated while doing NUMA node hotplug, but they shall be
corrected by later reads of the same files.
WARNING: possible circular locking dependency detected
------------------------------------------------------
cat/5224 is trying to acquire lock:
ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at:
show_slab_objects+0x94/0x3a8
but task is already holding lock:
b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (kn->count#45){++++}:
lock_acquire+0x31c/0x360
__kernfs_remove+0x290/0x490
kernfs_remove+0x30/0x44
sysfs_remove_dir+0x70/0x88
kobject_del+0x50/0xb0
sysfs_slab_unlink+0x2c/0x38
shutdown_cache+0xa0/0xf0
kmemcg_cache_shutdown_fn+0x1c/0x34
kmemcg_workfn+0x44/0x64
process_one_work+0x4f4/0x950
worker_thread+0x390/0x4bc
kthread+0x1cc/0x1e8
ret_from_fork+0x10/0x18
-> #1 (slab_mutex){+.+.}:
lock_acquire+0x31c/0x360
__mutex_lock_common+0x16c/0xf78
mutex_lock_nested+0x40/0x50
memcg_create_kmem_cache+0x38/0x16c
memcg_kmem_cache_create_func+0x3c/0x70
process_one_work+0x4f4/0x950
worker_thread+0x390/0x4bc
kthread+0x1cc/0x1e8
ret_from_fork+0x10/0x18
-> #0 (mem_hotplug_lock.rw_sem){++++}:
validate_chain+0xd10/0x2bcc
__lock_acquire+0x7f4/0xb8c
lock_acquire+0x31c/0x360
get_online_mems+0x54/0x150
show_slab_objects+0x94/0x3a8
total_objects_show+0x28/0x34
slab_attr_show+0x38/0x54
sysfs_kf_seq_show+0x198/0x2d4
kernfs_seq_show+0xa4/0xcc
seq_read+0x30c/0x8a8
kernfs_fop_read+0xa8/0x314
__vfs_read+0x88/0x20c
vfs_read+0xd8/0x10c
ksys_read+0xb0/0x120
__arm64_sys_read+0x54/0x88
el0_svc_handler+0x170/0x240
el0_svc+0x8/0xc
other info that might help us debug this:
Chain exists of:
mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(kn->count#45);
lock(slab_mutex);
lock(kn->count#45);
lock(mem_hotplug_lock.rw_sem);
*** DEADLOCK ***
3 locks held by cat/5224:
#0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8
#1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0
#2: b8ff009693eee398 (kn->count#45){++++}, at:
kernfs_seq_start+0x44/0xf0
stack backtrace:
Call trace:
dump_backtrace+0x0/0x248
show_stack+0x20/0x2c
dump_stack+0xd0/0x140
print_circular_bug+0x368/0x380
check_noncircular+0x248/0x250
validate_chain+0xd10/0x2bcc
__lock_acquire+0x7f4/0xb8c
lock_acquire+0x31c/0x360
get_online_mems+0x54/0x150
show_slab_objects+0x94/0x3a8
total_objects_show+0x28/0x34
slab_attr_show+0x38/0x54
sysfs_kf_seq_show+0x198/0x2d4
kernfs_seq_show+0xa4/0xcc
seq_read+0x30c/0x8a8
kernfs_fop_read+0xa8/0x314
__vfs_read+0x88/0x20c
vfs_read+0xd8/0x10c
ksys_read+0xb0/0x120
__arm64_sys_read+0x54/0x88
el0_svc_handler+0x170/0x240
el0_svc+0x8/0xc
I think it is important to mention that this doesn't expose the
show_slab_objects to use-after-free. There is only a single path that
might really race here and that is the slab hotplug notifier callback
__kmem_cache_shrink (via slab_mem_going_offline_callback) but that path
doesn't really destroy kmem_cache_node data structures.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html
[akpm@linux-foundation.org: add comment explaining why we don't need mem_hotplug_lock]
Link: http://lkml.kernel.org/r/1570192309-10132-1-git-send-email-cai@lca.pw
Fixes: 01fb58bcba63 ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path")
Fixes: 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1f7f6afd2276f0099290964ee5a4a4f1650d7f9
Author: Steffen Maier <maier@linux.ibm.com>
Date: Tue Oct 1 12:49:49 2019 +0200
scsi: zfcp: fix reaction on bit error threshold notification
[ Upstream commit 2190168aaea42c31bff7b9a967e7b045f07df095 ]
On excessive bit errors for the FCP channel ingress fibre path, the channel
notifies us. Previously, we only emitted a kernel message and a trace
record. Since performance can become suboptimal with I/O timeouts due to
bit errors, we now stop using an FCP device by default on channel
notification so multipath on top can timely failover to other paths. A new
module parameter zfcp.ber_stop can be used to get zfcp old behavior.
User explanation of new kernel message:
* Description:
* The FCP channel reported that its bit error threshold has been exceeded.
* These errors might result from a problem with the physical components
* of the local fibre link into the FCP channel.
* The problem might be damage or malfunction of the cable or
* cable connection between the FCP channel and
* the adjacent fabric switch port or the point-to-point peer.
* Find details about the errors in the HBA trace for the FCP device.
* The zfcp device driver closed down the FCP device
* to limit the performance impact from possible I/O command timeouts.
* User action:
* Check for problems on the local fibre link, ensure that fibre optics are
* clean and functional, and all cables are properly plugged.
* After the repair action, you can manually recover the FCP device by
* writing "0" into its "failed" sysfs attribute.
* If recovery through sysfs is not possible, set the CHPID of the device
* offline and back online on the service element.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #2.6.30+
Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 51ad5d1b36f4950a530875abcdaefa7d87cbd848
Author: Kai-Heng Feng <kai.heng.feng@canonical.com>
Date: Tue Apr 2 11:30:37 2019 +0800
drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50
commit 11bcf5f78905b90baae8fb01e16650664ed0cb00 upstream.
Another panel that needs 6BPC quirk.
BugLink: https://bugs.launchpad.net/bugs/1819968
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402033037.21877-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a61ac3915627fcdce756ac397e6ebbafeae5f83b
Author: Will Deacon <will@kernel.org>
Date: Fri Oct 4 10:51:31 2019 +0100
mac80211: Reject malformed SSID elements
commit 4152561f5da3fca92af7179dd538ea89e248f9d0 upstream.
Although this shouldn't occur in practice, it's a good idea to bounds
check the length field of the SSID element prior to using it for things
like allocations or memcpy operations.
Cc: <stable@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191004095132.15777-1-will@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49d84740f8a7040354ef93bf5915a4b3e651e71b
Author: Will Deacon <will@kernel.org>
Date: Fri Oct 4 10:51:32 2019 +0100
cfg80211: wext: avoid copying malformed SSIDs
commit 4ac2813cc867ae563a1ba5a9414bfb554e5796fa upstream.
Ensure the SSID element is bounds-checked prior to invoking memcpy()
with its length field, when copying to userspace.
Cc: <stable@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191004095132.15777-2-will@kernel.org
[adjust commit log a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5dd5ae04fd2393894d8f4ca7b95a2b54ca93d931
Author: Junya Monden <jmonden@jp.adit-jv.com>
Date: Wed Oct 16 14:42:55 2019 +0200
ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting
commit 22e58665a01006d05f0239621f7d41cacca96cc4 upstream.
Unlike other format-related DAI parameters, rdai->bit_clk_inv flag
is not properly re-initialized when setting format for new stream
processing. The inversion, if requested, is then applied not to default,
but to a previous value, which leads to SCKP bit in SSICR register being
set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.
Fixes: 1a7889ca8aba3 ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Junya Monden <jmonden@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 596836eb5c986deab7868268fb3caa6385ebfc47
Author: Marco Felsch <m.felsch@pengutronix.de>
Date: Mon Sep 16 12:45:48 2019 -0700
Input: da9063 - fix capability and drop KEY_SLEEP
commit afce285b859cea91c182015fc9858ea58c26cd0e upstream.
Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of
KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This
caused input device to not generate any events if "dlg,disable-key-power"
is set.
Fix this by unconditionally setting KEY_POWER capability, and not
declaring KEY_SLEEP.
Fixes: f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce58d14c2f398d6914522691a700852178f7d3e8
Author: Yufen Yu <yuyufen@huawei.com>
Date: Tue Oct 15 21:05:56 2019 +0800
scsi: core: try to get module before removing device
commit 77c301287ebae86cc71d03eb3806f271cb14da79 upstream.
We have a test case like block/001 in blktests, which will create a scsi
device by loading scsi_debug module and then try to delete the device by
sysfs interface. At the same time, it may remove the scsi_debug module.
And getting a invalid paging request BUG_ON as following:
[ 34.625854] BUG: unable to handle page fault for address: ffffffffa0016bb8
[ 34.629189] Oops: 0000 [#1] SMP PTI
[ 34.629618] CPU: 1 PID: 450 Comm: bash Tainted: G W 5.4.0-rc3+ #473
[ 34.632524] RIP: 0010:scsi_proc_hostdir_rm+0x5/0xa0
[ 34.643555] CR2: ffffffffa0016bb8 CR3: 000000012cd88000 CR4: 00000000000006e0
[ 34.644545] Call Trace:
[ 34.644907] scsi_host_dev_release+0x6b/0x1f0
[ 34.645511] device_release+0x74/0x110
[ 34.646046] kobject_put+0x116/0x390
[ 34.646559] put_device+0x17/0x30
[ 34.647041] scsi_target_dev_release+0x2b/0x40
[ 34.647652] device_release+0x74/0x110
[ 34.648186] kobject_put+0x116/0x390
[ 34.648691] put_device+0x17/0x30
[ 34.649157] scsi_device_dev_release_usercontext+0x2e8/0x360
[ 34.649953] execute_in_process_context+0x29/0x80
[ 34.650603] scsi_device_dev_release+0x20/0x30
[ 34.651221] device_release+0x74/0x110
[ 34.651732] kobject_put+0x116/0x390
[ 34.652230] sysfs_unbreak_active_protection+0x3f/0x50
[ 34.652935] sdev_store_delete.cold.4+0x71/0x8f
[ 34.653579] dev_attr_store+0x1b/0x40
[ 34.654103] sysfs_kf_write+0x3d/0x60
[ 34.654603] kernfs_fop_write+0x174/0x250
[ 34.655165] __vfs_write+0x1f/0x60
[ 34.655639] vfs_write+0xc7/0x280
[ 34.656117] ksys_write+0x6d/0x140
[ 34.656591] __x64_sys_write+0x1e/0x30
[ 34.657114] do_syscall_64+0xb1/0x400
[ 34.657627] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 34.658335] RIP: 0033:0x7f156f337130
During deleting scsi target, the scsi_debug module have been removed. Then,
sdebug_driver_template belonged to the module cannot be accessd, resulting
in scsi_proc_hostdir_rm() BUG_ON.
To fix the bug, we add scsi_device_get() in sdev_store_delete() to try to
increase refcount of module, avoiding the module been removed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191015130556.18061-1-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a56c80d8ee76daa1b7ce2e42e49f86e07aa5591a
Author: Colin Ian King <colin.king@canonical.com>
Date: Mon Oct 14 12:02:01 2019 +0100
staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS
commit 153c5d8191c26165dbbd2646448ca7207f7796d0 upstream.
Currently the exit return path when sme->key_idx >= NUM_WEPKEYS is via
label 'exit' and this checks if result is non-zero, however result has
not been initialized and contains garbage. Fix this by replacing the
goto with a return with the error code.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 0ca6d8e74489 ("Staging: wlan-ng: replace switch-case statements with macro")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191014110201.9874-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfdf982921b6f1bf99dfade9b7ef4e0bd4e67122
Author: Paul Burton <paulburton@kernel.org>
Date: Fri Oct 18 15:38:48 2019 -0700
MIPS: tlbex: Fix build_restore_pagemask KScratch restore
commit b42aa3fd5957e4daf4b69129e5ce752a2a53e7d6 upstream.
build_restore_pagemask() will restore the value of register $1/$at when
its restore_scratch argument is non-zero, and aims to do so by filling a
branch delay slot. Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0
-> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier)
prior to restoring $1 from a KScratch register, in order to resolve a
hazard that can result in stale values of the KScratch register being
observed. In particular, P-class CPUs from MIPS with out of order
execution pipelines such as the P5600 & P6600 are affected.
Unfortunately this EHB instruction was inserted in the branch delay slot
causing the MFC0 instruction which performs the restoration to no longer
execute along with the branch. The result is that the $1 register isn't
actually restored, ie. the TLB refill exception handler clobbers it -
which is exactly the problem the EHB is meant to avoid for the P-class
CPUs.
Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when
its mode argument equals refill_scratch, and suffers from the same
problem.
Fix this by in both cases moving the EHB earlier in the emitted code.
There's no reason it needs to immediately precede the MFC0 - it simply
needs to be between the MTC0 & MFC0.
This bug only affects Cavium Octeon systems which use
build_fast_tlb_refill_handler().
Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
Cc: Dmitry Korotin <dkorotin@wavecomp.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e509538bb9cc53f6f7f0adaa3210ec96189f4791
Author: Johan Hovold <johan@kernel.org>
Date: Fri Oct 18 17:19:54 2019 +0200
USB: ldusb: fix read info leaks
commit 7a6f22d7479b7a0b68eadd308a997dd64dda7dae upstream.
Fix broken read implementation, which could be used to trigger slab info
leaks.
The driver failed to check if the custom ring buffer was still empty
when waking up after having waited for more data. This would happen on
every interrupt-in completion, even if no data had been added to the
ring buffer (e.g. on disconnect events).
Due to missing sanity checks and uninitialised (kmalloced) ring-buffer
entries, this meant that huge slab info leaks could easily be triggered.
Note that the empty-buffer check after wakeup is enough to fix the info
leak on disconnect, but let's clear the buffer on allocation and add a
sanity check to read() to prevent further leaks.
Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5e48d279fce3d6536b0f70c786f7e98d8f84e1c
Author: Johan Hovold <johan@kernel.org>
Date: Tue Oct 15 19:55:22 2019 +0200
USB: usblp: fix use-after-free on disconnect
commit 7a759197974894213621aa65f0571b51904733d6 upstream.
A recent commit addressing a runtime PM use-count regression, introduced
a use-after-free by not making sure we held a reference to the struct
usb_interface for the lifetime of the driver data.
Fixes: 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191015175522.18490-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b64bc2abc569640e65ab9792850254f46025f5b
Author: Johan Hovold <johan@kernel.org>
Date: Thu Oct 10 14:58:34 2019 +0200
USB: ldusb: fix memleak on disconnect
commit b14a39048c1156cfee76228bf449852da2f14df8 upstream.
If disconnect() races with release() after a process has been
interrupted, release() could end up returning early and the driver would
fail to free its driver data.
Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191010125835.27031-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afa3bc254e0f054865f8b18d298f273e00c39849
Author: Johan Hovold <johan@kernel.org>
Date: Fri Oct 11 11:57:35 2019 +0200
USB: serial: ti_usb_3410_5052: fix port-close races
commit 6f1d1dc8d540a9aa6e39b9cb86d3a67bbc1c8d8d upstream.
Fix races between closing a port and opening or closing another port on
the same device which could lead to a failure to start or stop the
shared interrupt URB. The latter could potentially cause a
use-after-free or worse in the completion handler on driver unbind.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0b1f7e0c8a7da3db9122c8368bbe34c7e8763c7
Author: Gustavo A. R. Silva <gustavo@embeddedor.com>
Date: Mon Oct 14 14:18:30 2019 -0500
usb: udc: lpc32xx: fix bad bit shift operation
commit b987b66ac3a2bc2f7b03a0ba48a07dc553100c07 upstream.
It seems that the right variable to use in this case is *i*, instead of
*n*, otherwise there is an undefined behavior when right shifiting by more
than 31 bits when multiplying n by 8; notice that *n* can take values
equal or greater than 4 (4, 8, 16, ...).
Also, notice that under the current conditions (bl = 3), we are skiping
the handling of bytes 3, 7, 31... So, fix this by updating this logic
and limit *bl* up to 4 instead of up to 3.
This fix is based on function udc_stuff_fifo().
Addresses-Coverity-ID: 1454834 ("Bad bit shift operation")
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20191014191830.GA10721@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7de1569e525cc40435bb8443f2071af1f68a9111
Author: Kailang Yang <kailang@realtek.com>
Date: Thu May 2 16:03:26 2019 +0800
ALSA: hda/realtek - Add support for ALC711
commit 83629532ce45ef9df1f297b419b9ea112045685d upstream.
Support new codec ALC711.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d56c096bce06c3f009263c684d528e889a772f0
Author: Johan Hovold <johan@kernel.org>
Date: Thu Oct 10 14:58:35 2019 +0200
USB: legousbtower: fix memleak on disconnect
commit b6c03e5f7b463efcafd1ce141bd5a8fc4e583ae2 upstream.
If disconnect() races with release() after a process has been
interrupted, release() could end up returning early and the driver would
fail to free its driver data.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191010125835.27031-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ce6b467b9b200f34142e4eef51dd7018dc6f5ff
Author: Matthew Wilcox (Oracle) <willy@infradead.org>
Date: Fri Oct 25 09:58:36 2019 -0700
memfd: Fix locking when tagging pins
The RCU lock is insufficient to protect the radix tree iteration as
a deletion from the tree can occur before we take the spinlock to
tag the entry. In 4.19, this has manifested as a bug with the following
trace:
kernel BUG at lib/radix-tree.c:1429!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 7 PID: 6935 Comm: syz-executor.2 Not tainted 4.19.36 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:radix_tree_tag_set+0x200/0x2f0 lib/radix-tree.c:1429
Code: 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 44 24 10 e8 a3 29 7e fe 48 8b 44 24 10 48 0f ab 03 e9 d2 fe ff ff e8 90 29 7e fe <0f> 0b 48 c7 c7 e0 5a 87 84 e8 f0 e7 08 ff 4c 89 ef e8 4a ff ac fe
RSP: 0018:ffff88837b13fb60 EFLAGS: 00010016
RAX: 0000000000040000 RBX: ffff8883c5515d58 RCX: ffffffff82cb2ef0
RDX: 0000000000000b72 RSI: ffffc90004cf2000 RDI: ffff8883c5515d98
RBP: ffff88837b13fb98 R08: ffffed106f627f7e R09: ffffed106f627f7e
R10: 0000000000000001 R11: ffffed106f627f7d R12: 0000000000000004
R13: ffffea000d7fea80 R14: 1ffff1106f627f6f R15: 0000000000000002
FS: 00007fa1b8df2700(0000) GS:ffff8883e2fc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa1b8df1db8 CR3: 000000037d4d2001 CR4: 0000000000160ee0
Call Trace:
memfd_tag_pins mm/memfd.c:51 [inline]
memfd_wait_for_pins+0x2c5/0x12d0 mm/memfd.c:81
memfd_add_seals mm/memfd.c:215 [inline]
memfd_fcntl+0x33d/0x4a0 mm/memfd.c:247
do_fcntl+0x589/0xeb0 fs/fcntl.c:421
__do_sys_fcntl fs/fcntl.c:463 [inline]
__se_sys_fcntl fs/fcntl.c:448 [inline]
__x64_sys_fcntl+0x12d/0x180 fs/fcntl.c:448
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:293
The problem does not occur in mainline due to the XArray rewrite which
changed the locking to exclude modification of the tree during iteration.
At the time, nobody realised this was a bugfix. Backport the locking
changes to stable.
Cc: stable@vger.kernel.org
Reported-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 24bde2946b5ba072644b75a8b5f83edd86ebc350
Author: Stefano Brivio <sbrivio@redhat.com>
Date: Wed Oct 16 20:52:09 2019 +0200
ipv4: Return -ENETUNREACH if we can't create route but saddr is valid
[ Upstream commit 595e0651d0296bad2491a4a29a7a43eae6328b02 ]
...instead of -EINVAL. An issue was found with older kernel versions
while unplugging a NFS client with pending RPCs, and the wrong error
code here prevented it from recovering once link is back up with a
configured address.
Incidentally, this is not an issue anymore since commit 4f8943f80883
("SUNRPC: Replace direct task wakeups from softirq context"), included
in 5.2-rc7, had the effect of decoupling the forwarding of this error
by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin
Coddington.
To the best of my knowledge, this isn't currently causing any further
issue, but the error code doesn't look appropriate anyway, and we
might hit this in other paths as well.
In detail, as analysed by Gonzalo Siero, once the route is deleted
because the interface is down, and can't be resolved and we return
-EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(),
as the socket error seen by tcp_write_err(), called by
tcp_retransmit_timer().
In turn, tcp_write_err() indirectly calls xs_error_report(), which
wakes up the RPC pending tasks with a status of -EINVAL. This is then
seen by call_status() in the SUN RPC implementation, which aborts the
RPC call calling rpc_exit(), instead of handling this as a
potentially temporary condition, i.e. as a timeout.
Return -EINVAL only if the input parameters passed to
ip_route_output_key_hash_rcu() are actually invalid (this is the case
if the specified source address is multicast, limited broadcast or
all zeroes), but return -ENETUNREACH in all cases where, at the given
moment, the given source address doesn't allow resolving the route.
While at it, drop the initialisation of err to -ENETUNREACH, which
was added to __ip_route_output_key() back then by commit
0315e3827048 ("net: Fix behaviour of unreachable, blackhole and
prohibit routes"), but actually had no effect, as it was, and is,
overwritten by the fib_lookup() return code assignment, and anyway
ignored in all other branches, including the if (fl4->saddr) one:
I find this rather confusing, as it would look like -ENETUNREACH is
the "default" error, while that statement has no effect.
Also note that after commit fc75fc8339e7 ("ipv4: dont create routes
on down devices"), we would get -ENETUNREACH if the device is down,
but -EINVAL if the source address is specified and we can't resolve
the route, and this appears to be rather inconsistent.
Reported-by: Stefan Walter <walteste@inf.ethz.ch>
Analysed-by: Benjamin Coddington <bcodding@redhat.com>
Analysed-by: Gonzalo Siero <gsierohu@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1b2bdb9a1303cc1ece06b49d410ecb19f93b300
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Oct 14 11:22:30 2019 -0700
net: avoid potential infinite loop in tc_ctl_action()
[ Upstream commit 39f13ea2f61b439ebe0060393e9c39925c9ee28c ]
tc_ctl_action() has the ability to loop forever if tcf_action_add()
returns -EAGAIN.
This special case has been done in case a module needed to be loaded,
but it turns out that tcf_add_notify() could also return -EAGAIN
if the socket sk_rcvbuf limit is hit.
We need to separate the two cases, and only loop for the module
loading case.
While we are at it, add a limit of 10 attempts since unbounded
loops are always scary.
syzbot repro was something like :
socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
write(3, ..., 38) = 38
setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)
NMI backtrace for cpu 0
CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
watchdog+0x9d0/0xef0 kernel/hung_task.c:289
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046
RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914
RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1
R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f
R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003
FS: 00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
_raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
__wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
__wake_up+0xe/0x10 kernel/sched/wait.c:142
netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
tcf_add_notify net/sched/act_api.c:1343 [inline]
tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x803/0x920 net/socket.c:2311
__sys_sendmsg+0x105/0x1d0 net/socket.c:2356
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg net/socket.c:2363 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440939
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18bfe53b6c47dc04a671e73cb1dbb7a3f988e759
Author: Xin Long <lucien.xin@gmail.com>
Date: Tue Oct 15 15:24:38 2019 +0800
sctp: change sctp_prot .no_autobind with true
[ Upstream commit 63dfb7938b13fa2c2fbcb45f34d065769eb09414 ]
syzbot reported a memory leak:
BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
backtrace:
[...] slab_alloc mm/slab.c:3319 [inline]
[...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
[...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
[...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
[...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
[...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
[...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
[...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
[...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
[...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
[...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
[...] __do_sys_setsockopt net/socket.c:2100 [inline]
It was caused by when sending msgs without binding a port, in the path:
inet_sendmsg() -> inet_send_prepare() -> inet_autobind() ->
.get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is
not. Later when binding another port by sctp_setsockopt_bindx(), a new
bucket will be created as bp->port is not set.
sctp's autobind is supposed to call sctp_autobind() where it does all
things including setting bp->port. Since sctp_autobind() is called in
sctp_sendmsg() if the sk is not yet bound, it should have skipped the
auto bind.
THis patch is to avoid calling inet_autobind() in inet_send_prepare()
by changing sctp_prot .no_autobind with true, also remove the unused
.get_port.
Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15cfb7203fba9e1e1561ba05b4788828642e98d8
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Fri Oct 11 12:53:49 2019 -0700
net: bcmgenet: Set phydev->dev_flags only for internal PHYs
[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]
phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.
Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0197645bf8cd6d6e3994a24d3b2dfd3d72b49167
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue Oct 15 10:45:47 2019 -0700
net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3
[ Upstream commit efb86fede98cdc70b674692ff617b1162f642c49 ]
The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
became 6 for GENET v4 and above, account for that difference.
Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6303b51d182a269dc676e6350911321cb1350fa8
Author: Alessio Balsini <balsini@android.com>
Date: Wed Oct 23 18:17:36 2019 +0100
loop: Add LOOP_SET_DIRECT_IO to compat ioctl
[ Upstream commit fdbe4eeeb1aac219b14f10c0ed31ae5d1123e9b8 ]
Enabling Direct I/O with loop devices helps reducing memory usage by
avoiding double caching. 32 bit applications running on 64 bits systems
are currently not able to request direct I/O because is missing from the
lo_compat_ioctl.
This patch fixes the compatibility issue mentioned above by exporting
LOOP_SET_DIRECT_IO as additional lo_compat_ioctl() entry.
The input argument for this ioctl is a single long converted to a 1-bit
boolean, so compatibility is preserved.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 75d52a1d100c21aecb0aae6045a159af7d542507
Author: Yi Li <yilikernel@gmail.com>
Date: Fri Oct 18 20:20:08 2019 -0700
ocfs2: fix panic due to ocfs2_wq is null
commit b918c43021baaa3648de09e19a4a3dd555a45f40 upstream.
mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters
an error. ocfs2_initialize_super() returns before allocating ocfs2_wq.
ocfs2_dismount_volume() triggers the following panic.
Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted.
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30
Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30
------------[ cut here ]------------
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G E
4.14.148-200.ckv.x86_64 #1
Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018
task: ffff967af0520000 task.stack: ffffa5f05484000
RIP: 0010:mutex_lock+0x19/0x20
Call Trace:
flush_workqueue+0x81/0x460
ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2]
ocfs2_dismount_volume+0x84/0x400 [ocfs2]
ocfs2_fill_super+0xa4/0x1270 [ocfs2]
? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2]
mount_bdev+0x17f/0x1c0
mount_fs+0x3a/0x160
Link: http://lkml.kernel.org/r/1571139611-24107-1-git-send-email-yili@winhong.com
Signed-off-by: Yi Li <yilikernel@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c03bacc9d501c64e4198707976d0e447aabc848
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Wed Oct 9 13:12:37 2019 -0500
Revert "drm/radeon: Fix EEH during kexec"
[ Upstream commit 8d13c187c42e110625d60094668a8f778c092879 ]
This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6.
This breaks some boards. Maybe just enable this on PPC for
now?
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95cfeeb5fe10ab498ed75c0a1c7a058077096407
Author: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri Sep 27 16:30:27 2019 -0700
namespace: fix namespace.pl script to support relative paths
[ Upstream commit 82fdd12b95727640c9a8233c09d602e4518e71f7 ]
The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.
Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.
This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.
This behavior was changed in 7e1c04779efd ("kbuild: Use relative path
for $(objtree)", 2014-05-14)
Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.
Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.
The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.
rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.
Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f549c98ada3321ad01485fafa3c556eac406dd7f
Author: Yizhuo <yzhai003@ucr.edu>
Date: Tue Oct 1 13:24:39 2019 -0700
net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write()
[ Upstream commit 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 ]
In function mdio_sc_cfg_reg_write(), variable "reg_value" could be
uninitialized if regmap_read() fails. However, "reg_value" is used
to decide the control flow later in the if statement, which is
potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b742b54cb85e049bb4992dce19977014d9b6473f
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Tue Sep 10 05:59:07 2019 +0200
mips: Loongson: Fix the link time qualifier of 'serial_exit()'
[ Upstream commit 25b69a889b638b0b7e51e2c4fe717a66bec0e566 ]
'exit' functions should be marked as __exit, not __init.
Fixes: 85cc028817ef ("mips: make loongsoon serial driver explicitly modular")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: chenhc@lemote.com
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8b6d5c1e143bc2ef48a3372ee414ddabcb4342b2
Author: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri Sep 27 10:03:16 2019 +0800
mac80211: fix txq null pointer dereference
[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ]
If the interface type is P2P_DEVICE or NAN, read the file of
'/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a
NULL pointer dereference. As for those interface type, the
pointer sdata->vif.txq is NULL.
Unable to handle kernel NULL pointer dereference at virtual address 00000011
CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1
task: ffffffc0337e4880 task.stack: ffffff800cd20000
PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[...]
Process cat (pid: 30936, stack limit = 0xffffff800cd20000)
[...]
[<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211]
[<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211]
[<ffffff80082eff94>] full_proxy_read+0x2c/0x48
[<ffffff80081eef00>] __vfs_read+0x2c/0xd4
[<ffffff80081ef084>] vfs_read+0x8c/0x108
[<ffffff80081ef494>] SyS_read+0x40/0x7c
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2f1530002f52feeb81884888d90aa1a839a5cda2
Author: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Thu Sep 26 16:16:50 2019 +0800
nl80211: fix null pointer dereference
[ Upstream commit b501426cf86e70649c983c52f4c823b3c40d72a3 ]
If the interface is not in MESH mode, the command 'iw wlanx mpath del'
will cause kernel panic.
The root cause is null pointer access in mpp_flush_by_proxy(), as the
pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface.
Unable to handle kernel NULL pointer dereference at virtual address 00000068
[...]
PC is at _raw_spin_lock_bh+0x20/0x5c
LR is at mesh_path_del+0x1c/0x17c [mac80211]
[...]
Process iw (pid: 4537, stack limit = 0xd83e0238)
[...]
[<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211])
[<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat])
[<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c)
[<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac)
[<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34)
[<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204)
[<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370)
[<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84)
[<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228)
[<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70)
[<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44)
Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f)
---[ end trace bbd717600f8f884d ]---
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b49ac6012d757050556c223cb2c5073092e215db
Author: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Mon Sep 30 11:39:52 2019 +0200
MIPS: dts: ar9331: fix interrupt-controller size
[ Upstream commit 0889d07f3e4b171c453b2aaf2b257f9074cdf624 ]
It is two registers each of 4 byte.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3d7f1bfaf354ee371b90ba4e65463fcbd701feed
Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon Sep 30 11:54:50 2019 +0300
ARM: dts: am4372: Set memory bandwidth limit for DISPC
[ Upstream commit f90ec6cdf674248dcad85bf9af6e064bf472b841 ]
Set memory bandwidth limit to filter out resolutions above 720p@60Hz to
avoid underflow errors due to the bandwidth needs of higher resolutions.
am43xx can not provide enough bandwidth to DISPC to correctly handle
'high' resolutions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 45c28489bd0a9ea66d9448a033aba2fb24777f1b
Author: Tony Lindgren <tony@atomide.com>
Date: Tue Sep 24 09:25:52 2019 -0700
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
[ Upstream commit 8ad8041b98c665b6147e607b749586d6e20ba73a ]
For ti,sysc-omap4 compatible devices with no sysstatus register, we do have
reset done status available in the SOFTRESET bit that clears when the reset
is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG
register. The am335x TRM just says that SOFTRESET bit value 1 means reset is
ongoing, but it behaves the same way clearing after reset is done.
With the ti-sysc driver handling this automatically based on no sysstatus
register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the
legacy platform data:
ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022
ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022
ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022
...
Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also
remove the useless parentheses while at it.
If it turns out we do have ti,sysc-omap4 compatible devices without a
working SOFTRESET bit we can set up additional quirk handling for it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0229c97ff6d59dcd42ce2deb54e801db5260875e
Author: Quinn Tran <qutran@marvell.com>
Date: Thu Sep 12 11:09:06 2019 -0700
scsi: qla2xxx: Fix unbound sleep in fcport delete path.
[ Upstream commit c3b6a1d397420a0fdd97af2f06abfb78adc370df ]
There are instances, though rare, where a LOGO request cannot be sent out
and the thread in free session done can wait indefinitely. Fix this by
putting an upper bound to sleep.
Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 80efde4ba80d968ff94caee94fad69dc15ba6f26
Author: Xiang Chen <chenxiang66@hisilicon.com>
Date: Sat Sep 7 09:07:30 2019 +0800
scsi: megaraid: disable device when probe failed after enabled device
[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ]
For pci device, need to disable device when probe failed after enabled
device.
Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ea8a6a585aa5ec4bbd37dc14ad882633644d5136
Author: Stanley Chu <stanley.chu@mediatek.com>
Date: Wed Sep 18 12:20:38 2019 +0800
scsi: ufs: skip shutdown if hba is not powered
[ Upstream commit f51913eef23f74c3bd07899dc7f1ed6df9e521d8 ]
In some cases, hba may go through shutdown flow without successful
initialization and then make system hang.
For example, if ufshcd_change_power_mode() gets error and leads to
ufshcd_hba_exit() to release resources of the host, future shutdown flow
may hang the system since the host register will be accessed in unpowered
state.
To solve this issue, simply add checking to skip shutdown for above kind of
situation.
Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>