Summary of changes from v2.5.73 to v2.5.74
============================================
<dave@thedillows.org>
Use a non-zero rx_copybreak to avoid charging a full MTU to the
socket on tiny packets.
Dave Miller suggested 256, I used 200 to be more consistent with the
other network drivers.
<davej@codemonkey.org.uk>
[CPUFREQ] speedstep_detect_speed might not reenable interrupts
From Samuel Thibault
local_irq_save() is called at the beginning of speedstep_detect_speeds,
but local_irq_restore() is not called on I/O errors.
<rmk@flint.arm.linux.org.uk>
[SERIAL] Fix 8250 revision width.
Patch from wli, edited by rmk.
'rev' needs to be at least 16 bits.
<jgrimm@touki.austin.ibm.com>
[SCTP] Break out sctp_assoc_valid() from sctp_id2assoc().
sctp_id2assoc() was trying to do too many things. Break out, so
sctp_assoc_bh_rcv() can just find out whether the assoc is valid.
<anton@samba.org>
ppc64: implement any_online_cpu
<paulus@samba.org>
PPC32: Implement force_successful_syscall_return.
We use a bit in the thread_info flags for this. The bit is cleared on syscall
entry and set by force_successful_syscall_return. If the bit is set on syscall
exit, the normal check whether the value from the syscall function is an
error code is disabled and the value is just returned to userspace.
<anton@samba.org>
ppc64: Fix sysinfo translation, spotted by Dave Miller
<jbarnes@sgi.com>
[PATCH] ia64: bitshift fix
I think there are other 64p issues in other places, but we found this
one while doing 2.5 bringup on hardware.
<jbarnes@sgi.com>
[PATCH] ia64: mark_idle() fixes for sn2
Small patch to fixup the new mark_idle() stuff for sn2.
<jbarnes@sgi.com>
[PATCH] ia64: hwgfs fix for sn2
Small fix for hwgfs on sn2.
<jbarnes@sgi.com>
[PATCH] ia64: PCI fixes for sn2
Updates the PCI routines for sn2.
<jbarnes@sgi.com>
[PATCH] ia64: generic kernel support for sn2
I _think_ I got this one right (at least, it booted on hw). It should
allow generic kernels to include the sn2 code.
<davidm@tiger.hpl.hp.com>
ia64: Drop obsolete ACPI SPCR support.
<davidm@tiger.hpl.hp.com>
ia64: Two more minor cleanups for 2.5.72.
<chadt@sgi.com>
[PATCH] ia64: early_printk for SGI SN2
<davidm@tiger.hpl.hp.com>
ia64: Minor cleanups; fix non-SMP build.
<davidm@tiger.hpl.hp.com>
ia64: Simplify the script to use only $CC and $OBJDUMP. Besides being simpler,
this also ensure we really do test the linker which will be
used when building the gate DSO.
<davidm@tiger.hpl.hp.com>
Kconfig:
Add back IDE configuration.
<jbarnes@sgi.com>
[PATCH] ia64: sn2 updates for 2.5.72
Here's a patch against your bk tree that keeps things building for sn2
(and working with the discontig patch applied).
<alext@fc.hp.com>
[PATCH] ia64: cleanup xor build rule to take advantage of lib-m
<davidm@tiger.hpl.hp.com>
ia64: Fix a alternate-signal-stack bug which could corrupt RNaT bits
when bspstore happened to point to an RNaT-slot.
Bug reported by Matt Chapman.
<davidm@wailua.hpl.hp.com>
ia64: More perfmon fixes:
- removes 2.4 specific macros/inline functions
- fix rum vs. rsm bug for psr.up
- introduce cleaner PMC_IS_CONTROL() macro
- only save the value of psr.up on ctxsw (not whole psr)"
<anton@samba.org>
ppc64: Convert from K+R to ansi
<anton@samba.org>
ppc64: small __access_ok optimisation
<david-b@pacbell.net>
[PATCH] USB: GFDL in the kernel tree
I don't care about this enough to argue ...
I attach a patch to make it use the same legalese as
the other docs.
<greg@kroah.com>
USB: delete cdc-ether driver as it's no longer needed.
<judd@jpilot.org>
[PATCH] USB: add module paramater to visor driver for new devices
Allows new palm OS 4.x devices to be added by a module paramater instead
of being forced to recompile the driver.
<oliver@neukum.org>
[PATCH] USB: fix kaweth warnings
- fix compiler warning due to merge oversight
<greg@kroah.com>
[PATCH] USB: pl2303: add ability to report CTS and DSR status to userspace
<johannes@erdfelt.com>
[PATCH] USB: fix UHCI debug kmalloc() usage
Here's a patch from Tony Luck that fixes a problem with the UHCI
debugging code on architectures with big page sizes. We end up
allocating more than kmalloc allows.
<felixb@sgi.com>
[XFS] Modified to always pass NULL as data parameter to VOP_ATTR_GET(),
whenever ATTR_KERNOVAL flag is used.
SGI Modid: 2.5.x-xfs:slinx:147567a
<overby@sgi.com>
[XFS] Remove a use after free which was introduced in the debug
build.
SGI Modid: 2.5.x-xfs:slinx:148158a
<lord@sgi.com>
[XFS] optimize the code used to initialize inodes during their allocation.
SGI Modid: 2.5.x-xfs:slinx:148423a
<overby@sgi.com>
[XFS] Ensure that when we unlock a log item when there is someone waiting
for log space, we give at least one thread a chance to flush
metadata and free more log space.
SGI Modid: 2.5.x-xfs:slinx:149321a
<lord@sgi.com>
[XFS] When flushing inodes in to free log space, make the flush async rather
than delayed write.
SGI Modid: 2.5.x-xfs:slinx:149418a
<sandeen@sgi.com>
[XFS] Remove test for impossible condition (unsigned 8-bit >= 256)
SGI Modid: 2.5.x-xfs:slinx:149574a
<nathans@sgi.com>
[XFS] Fix an assert in log init code
SGI Modid: 2.5.x-xfs:slinx:149646a
<nathans@sgi.com>
[XFS] V2 log update - tighten checks for corrupt log during recovery
SGI Modid: 2.5.x-xfs:slinx:150093a
<nathans@sgi.com>
[XFS] Version 2 log code fixes in recovery.
SGI Modid: 2.5.x-xfs:slinx:150122a
<lord@sgi.com>
[XFS] fix sign of error return in mount update and statfs operations,
mount update could have returned either sign, and statfs was
just wrong.
SGI Modid: 2.5.x-xfs:slinx:150137a
<lord@sgi.com>
[XFS] Update linux directory inode contents after the initial mkdir,
right now size shows up as zero which is wrong.
SGI Modid: 2.5.x-xfs:slinx:150334a
<lord@sgi.com>
[XFS] if we remount the fs readonly, there is no need to put
out dummy log records to clear the log as these actually
have the effect of dirtying it in a readonly unmount.
SGI Modid: 2.5.x-xfs:slinx:150738a
<lists@mdiehl.de>
[PATCH] fix vlsi_ir.c compile if !CONFIG_PROC_FS
On Mon, 9 Jun 2003, Jean Tourrilhes wrote:
> > Yes, Thanks. In fact walking over the proc-stuff in vlsi_ir, there are
> > some more places which need cleanup and fixing.
> >
> > Jean, please apply the patch below - ChangeLog:
>
> Would you mind sending it also to Jeff ? I want you to be able
> to work without depending on me.
> But I'll add that on my todo list anyway...
Ok - here we go. Slightly improved patch compared to what I've sent first
so we handle now failure in create_proc_entry and !CONFIG_PROC_FS
identical, i.e. continue without proc entry. It's not needed for the
driver to work.
Updated Changelog:
* make it compile without CONFIG_PROC_FS (problem reported by Adrian Bunk,
original patch by Sam Ravnborg)
* get rid of a number of unneeded ifdef/endif CONFIG_PROC_FS (also
removing an "unused label" warning)
* use proc entrys' owner fields to protect against module removal racing
with proc entry access.
* handle failure in create_proc_entry like !CONFIG_PROC_FS
* set driver version 0.4a
Jeff, would please forward it for application to 2.5!
Martin
<lord@sgi.com>
[XFS] make doing an iread from a bad location less chatty by default
as some code paths can actually do this and handle the result.
SGI Modid: 2.5.x-xfs:slinx:150747a
<lord@sgi.com>
[XFS] break dependency between CONFIG_PROCFS and CONFIG_SYSCTL in xfs
SGI Modid: 2.5.x-xfs:slinx:150782a
<nathans@sgi.com>
[XFS] Turn log head/tail check into an assert - this condition should never be true here
SGI Modid: 2.5.x-xfs:slinx:151422a
<lord@sgi.com>
[XFS] SYNC_FSDATA and SYNC_REFCACHE are supposed to be distinct values,
they ended up the same somehow.
SGI Modid: 2.5.x-xfs:slinx:151227a
<lord@sgi.com>
[XFS] Move the pagebuf_runall_queues out from under a spinlock, if it
sleeps (which it might), this is not the right place for it to
be. There is also no reason for it to be under a spinlock.
SGI Modid: 2.5.x-xfs:slinx:151032a
<lord@sgi.com>
[XFS] Fix deadlock between xfs_finish_reclaim and xfs_iget_core. An inode being
reclaimed and removed from memory by one thread while another thread
is attempting to reuse the inode and bring it back to life. There
was a window between the iget starting to reuse the inode and the
reclaim starting. Close the window by marking the inode as being
reused under the hash lock, and by abandoning the reclaim if this
is detected when it obtains the hash lock.
SGI Modid: 2.5.x-xfs:slinx:151123a
<lord@jen.americas.sgi.com>
[XFS] really delete kmem.c
SGI Modid: 2.5.x-xfs:slinx:148936a
<nathans@sgi.com>
[XFS] Fix some remaining unaligned access issues on 64 bit platforms.
SGI Modid: 2.5.x-xfs:slinx:143601a
<lord@sgi.com>
[XFS] Remove a dead code path from mount, noticed by Al Viro.
SGI Modid: 2.5.x-xfs:slinx:151226a
<nathans@sgi.com>
[XFS] Add in benign missing sector flag to SB version macro
SGI Modid: 2.5.x-xfs:slinx:151428a
<nathans@sgi.com>
[XFS] Fix remount readonly so it really wont write dummy log records
SGI Modid: 2.5.x-xfs:slinx:151423a
<lord@sgi.com>
[XFS] Fix deadlock caused by race between xfs_iunpin marking an inode
dirty, and the same inode being reallocated and reused by create.
The unlock_new_inode and mark_inode_dirty manage to corrupt the
i_state flags and end up leaving I_LOCK|I_NEW set.
SGI Modid: 2.5.x-xfs:slinx:151120a
<cwf@sgi.com>
[XFS] Close window to prevent a file with delayed write extents from being
converted to a realtime file.
SGI Modid: 2.5.x-xfs:slinx:150953a
<linux@de.rmk.(none)>
[PCMCIA] TI1520 cardbus patch for 2.4.x..
Linus Torvalds wrote:
> Here's a patch that apparently improves throughput on Texas
> Instrument 1520 controllers a lot by enabling memory bursting.
> Apparently to the point that without this you can't even do
> things like 802.11g without starting to drop data.
Done. Also cleaned up the "Override Table" a bit.
<linux@de.rmk.(none)>
[PCMCIA] ti113x - fall back to PCI interrupt (from 2.4.-ac)
Stumbled over this patch within 2.4.21-ac. Depends on the ti113x.h
burst mode patch sent earlier.
<jgrimm@touki.austin.ibm.com>
[SCTP] Change sysctl settable timers to ms granularity (rmlayer@us.ibm.com)
<sri@us.ibm.com>
[SCTP] Fix for incorrect vtag in the stale cookie ERROR chunk.
<jgrimm@touki.austin.ibm.com>
[SCTP] OOTB Cookie-Echo path does not like stale cookie vtag fix.
Move fix out of generic path, into the stale cookie path.
<akpm@digeo.com>
[PATCH] __devinitdata declarations should not be marked const.
There are some bad compiler issues with section confusion ("const" stuff
likes going into the rodata section).
<Andries.Brouwer@cwi.nl>
[PATCH] loop.c cleanups
This does the following:
- remove trailing spaces
- make loop.h independent by including bio.h, blk.h, spinlock.h
- replace the lock/unlock functions by module_get/module_put;
in struct loop this is the change
- void (*lock)(struct loop_device *);
- void (*unlock)(struct loop_device *);
+ struct module *owner;
- replace the integer lo_encrypt_type by the pointer lo_encryption;
there was a race with loop_unregister_transfer
- fixed an off-by-one in loop_register_transfer
This is Step 1 of a series of half a dozen or so.
Half of the above is from Jari. Anything that is wrong is mine.
<ldl@aros.net>
[PATCH] fix nbd driver for 2.5 block layer
This makes NBD work with the new linux 2.5 block layer design.
Specifically, it fixes memory corruption that results from module
removal and possible memory corruption from sending or receiving disk
data from the server.
It essentially rolls together the changes from two of the last patchlets
that I emailed: the fix for module removal & the fix for incorrect
struct bio usage. I believe it's wisest to roll these both together
into this one patch since they both deal with making NBD work better
with the 2.5 linux block layer design and without either of which, it's
possible that NBD will corrupt memory.
Other changes I'd like to see introduced (like in the earlier jumbo
patch) meanwhile are feature enhancements so they can wait. This patch
also should address all the very helpful concerns that have been raised
so far. Particularly:
1. that the very first submitted NBD patch was broken down [Andrew]
2. that only 1 spinlock is used for all the NBD request_queue structures
used [Jens,Al]
3. that kmap() is used in case of highmem pages [Jens]
4. that the allocation of request_queue is dynamic and seperate from
other allocated objects [Al]
<davem@nuts.ninka.net>
[SPARC64]: Update struct compat_statfs.
<davem@nuts.ninka.net>
[SPARC64]: Update solaris compat layer for vfs_statfs() changes.
<davem@nuts.ninka.net>
[SPARC]: Update for show_stack() changes.
<davem@nuts.ninka.net>
[SPARC]: Add {f,}statfs64 syscall entries.
<rusty@rustcorp.com.au>
[PATCH] Workqueue Exit Neatening
Jeff Garzik points out the initializing the exit completion at
exit time is foolish: we should just initialize it at creation time
live everything else in that structure, and avoid the memory barrier.
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Fix ide-cs driver name (for PCMCIA binding)
Problem noticed by Eivind Tagseth.
We seem to have resurected the "ide_cs" driver name for the ide-cs module.
Restore the driver name to "ide-cs".
<dwmw2@infradead.org>
MTD driver cleanups...
- Fix AFS partitioning oops when no partitions are found
- Add missing spin_unlock, optimise buffer writes in Intel NOR driver
- Fix DiskOnChip Millennium Plus register OutputControl register definition
- Fix DiskOnChip drivers to indicate correct ECC type
- Fix map drivers to use ARRAY_SIZE instead of redefining it.
- Make uCLinux map driver depend on !MMU
- Fix NAND write verify problem on some chips
- Other trivia from Rusty.
<dwmw2@infradead.org>
Replace mtd_blktrans ->ioctl() method with ->getgeo() and ->flush()
... and also fix the embarrassing bug where NFTL and INFTL will
barf and exit if the add_mtd_blktrans_dev() function _exists_,
rather than actually calling it and barfing if it returns non-zero :)
<dwmw2@infradead.org>
Trivia: use JFFS2 PAD() macro instead of masking manually.
<dwmw2@infradead.org>
Fix jffs2_statfs w.r.t. statfs64
<dwmw2@infradead.org>
Remove superfluous debugging in mtd_blkdevs.c
<ink@jurassic.park.msu.ru>
[PATCH] PCI: fix non-hotplug build
Current BK won't build when CONFIG_HOTPLUG is not set due to
undefined references to pci_destroy_dev in hotplug.c.
I think it makes sense to not compile hotplug.c in this case at all.
Also, this allows to get rid of several function which are unused
in non-hotplug kernel.
Tested on Alpha.
<ink@jurassic.park.msu.ru>
[PATCH] PCI: fix alpha for reimplement pci proc name
On Fri, Jun 20, 2003 at 02:24:13PM -0700, Greg KH wrote:
> Thanks, I've reverted your previous patch, and fixed the one typo in
> this patch and applied it all to my bk tree. Hopefully Linus will pull
> from it sometime soon :)
Argh, where were my eyes... There was another typo which broke Alpha.
<jes@wildopensource.com>
[PATCH] ia64: fix static initializers
No need to explicitly zero out global variables.
<lord@sgi.com>
[PATCH] Fix XFS proc interface initializers
[XFS] the intializers for the /proc interface to xfs got out of order,
and we are syncing 1000 times faster than we are supposed to!
SGI Modid: 2.5.x-xfs:slinx:151712a
<ralf@linux-mips.org>
[PATCH] MIPS merge, generic mips bits.
This contains all the generic 32-bit MIPS code, so all arch/mips/ and
include/asm-mips/ stuff.
<ralf@linux-mips.org>
[PATCH] MIPS merge, generic mips64 bits.
This updates the generic mips64 code.
<ralf@linux-mips.org>
[PATCH] SGI IP22 bits
An update for the Indy aka IP22 support. Consolidates the 32-bit and
64-bit copies of the support code into one directory, so in total this
patch deletes quite a bit of code.
<ralf@linux-mips.org>
[PATCH] PCI code
This is the entire MIPS PCI code which I'm consolidating in arch/mips/pci/.
Applying this patch will result in some code duplication; the remaining
patches I'm about to send will clean that.
<ralf@linux-mips.org>
[PATCH] 2.7.73 SGI IP27 update
An update of the SGI IP27 aka Origin 200/2000/Onyx 2 support.
<ralf@linux-mips.org>
[PATCH] Code for Galileo boards
The support code for two more Galileo evaluation boards.
(Evil stuff, just to get your tree in sync again. I've got a cleanup in
my work tree).
<ralf@linux-mips.org>
[PATCH] Sibyte updates
Update the code for the BCM1250 and evaluation platforms.
<ralf@linux-mips.org>
[PATCH] Alchemy update
This is an update of the AMD Alchemy support for 2.5.
(This is way behind what we have for 2.4 but forward porting is non-trivial
and work in progress.)
<ralf@linux-mips.org>
[PATCH] Update for MIPS Inc's eval boards.
This is an update for MIPS Inc's evaluation boards in all their ugly
versions ...
<ralf@linux-mips.org>
[PATCH] TX49xx update
This adds support for Toshiba's TX49xx SOCs and an evaluation board with
the nice nae RBTX4927.
<ralf@linux-mips.org>
[PATCH] Baget update
This is an update for the Russian Baget industrial controller. Suffers a
bit from bitrot, the authors have promised an update to me.
<ralf@linux-mips.org>
[PATCH] DEC update
An update of the code for the DECstations. This also adds 64-bit support
for the R4000 versions of DEC's good old workstations.
<ralf@linux-mips.org>
[PATCH] NEC DDB update
This updates the support for NEC's DDB series of evaluation boards.
<ralf@linux-mips.org>
[PATCH] NEC VR41xx update
This one adds support for a bunch of NEC VR41xx-based platforms such as
IBM's workpad and a bunch of eval boards.
<ralf@linux-mips.org>
[PATCH] JMR3927 update
This updates support for the JMR3927 eval board.
<ralf@linux-mips.org>
[PATCH] Update Cobalt support
This adds back support for the MIPS-based Cobalt Raq 1/2 and Qube 1/2
systems.
<ralf@linux-mips.org>
[PATCH] Add support for SGI IP32
This adds support for SGI's O2 workstation aka IP32.
<ralf@linux-mips.org>
[PATCH] Momentum update
This adds the board support code for Momentum's Ocelot series of boards.
<ralf@linux-mips.org>
[PATCH] drivers/sgi update
This updates drivers/sgi by removing it :-) With all the conceptually
wrong code which has was rewritten or should be rewritten or better
live elsewhere there just was no point in keeping this directory around
any longer.
<ralf@linux-mips.org>
[PATCH] ARC update
This updates the ARC firmware support code. Also removes the 64-bit
variant of the code; the 64-bit kernel now uses the 32-bit code also.
<ralf@linux-mips.org>
[PATCH] Lasat support
This patch adds support for the Lasat 100 and 200 systems.
<ralf@linux-mips.org>
[PATCH] Remove Nino support
This patch mostly removes the support for the Phillips Nino at the
request of the author. The only remaining bits are directly related
to the SOC the Nino is based on which is used by other ports.
<torvalds@home.transmeta.com>
Remove SGI subdirectory from driver Makefile, since it is now
gone.
<yoshfuji@linux-ipv6.org>
[IPV6]: Clean-up advmss calculation.
<chas@cmf.nrl.navy.mil>
[ATM]: Move vccs to global sk-based linked list.
<shemminger@osdl.org>
[NET]: PPPoE cleanup [TRIVIAL].
This is a cleanup patch, no change in functionality.
- Get rid of debug macro's that aren't used anywhere in the code.
- Make functions and data structures static where possible
- C99 initializer for ppoe_chan_ops
- fix whitespace typo
<shemminger@osdl.org>
[NET]: Fix oops on /proc/net/pppoe.
<shemminger@osdl.org>
[NET]: Convert PPPoE to new style protocol.
<hunold@convergence.de>
[PATCH] update the generic saa7146 driver
- update the generic saa7146 driver
- remove some #if LINUX_VERSION_CODE constructions
- sync with the interrupt handler changes in 2.5.69
- add a missing kfree() call which caused the kernel to leak 32kB of
kmalloc()ed memory. iieek!
- fixed the capture code to handle cards that have swapped field order
(odd and even fields)
- added and fixed some debug messages
- changed from kmalloc() to pci_consistent()
- many small changes necessary to fix warnings/problems for ppc64
compilation
<hunold@convergence.de>
[PATCH] update dvb subsystem core
- update dvb subsystem core
- switched from user-land types like __u8 to u8 and uint16_t to u16
this makes the patch rather large.
- updated the dvr (digital videorecording) facility
- renamed some structures, like "struct dmxdev_s" to "struct dmxdev"
- introduced dvb_functions.[ch], where some linux-kernel specific
functions are encapsulated. by this, the dvb subsystem stays quite
independent from deeper linux kernel functions.
- moved dvb_usercopy() to dvb_functions.c -- this is essentially
video_usercopy() which should be generic_usercopy() instead...
- Made the dvb-core in dvbdev.c work with devfs again.
- remove all typedefs from structs
- remove all typedefs from enums
<hunold@convergence.de>
[PATCH] update the av7110 and budget drivers
- update the av7110 and budget drivers
- replaced ddelay() wait function with generic dvb_delay()
implementation
- new DATA_MPEG_VIDEO_EVENT for direct mpeg2 video playback
- added support for DVB-C cards with MSP3400 mixer and analog tuner
- fixed up the av7110_ir handler and especially the write_proc()
function; this fixed the bug the Stanford Checker has found
<hunold@convergence.de>
[PATCH] update dvb frontend drivers
- update dvb frontend drivers
- C99 initializers
- fix up some includes
- various bugfixes
<hunold@convergence.de>
[PATCH] add a new driver for the cx24110 frontend
- add a new driver for the cx24110 frontend by Peter Hettkamp
<peter.hettkamp@t-online.de>
<hunold@convergence.de>
[PATCH] add dvb subsystem as a crc32 lib user
- add dvb subsystem as a crc32 lib user
<hunold@convergence.de>
[PATCH] update analog saa7146 drivers mxb and dpc7146
- update analog saa7146 drivers mxb and dpc7146
- add MODULE_DEVICE_TABLE entries, so that /sbin/hotplug can handle the
devices
- fixup due to the latest i2c changes
<hunold@convergence.de>
[PATCH] correct the i2c address of saa7111
- this patch corrects the i2c address from "34>>1" to 0x24 and 0x25.
Believe me -- or look at the data sheet, for example from
http://www.gdv.uni-hannover.de/~hunold1/linux/saa7146/specs/saa7111a.pdf
Page 41 says: "Slave address read = 49H or 4BH; note 2 write = 48H or
4AH" They use 8-bit addresses here, but i2c addresses are 7-bit, ie.
0x48>>1 == 0x24 and 0x4a>>1 = 0x25
<hunold@convergence.de>
[PATCH] clean up the parts according to the comments on kernel mailing list
clean up the parts according to the comments on kernel mailing list
(mainly by Christoph Hellwig)
- ugly WRITE_RPS0 define in saa7146_hlp.c has been replaced by a proper
inline (I hope)
- use <linux/types.h> not <asm/types.h> everywhere
- include <asm/*.h> headers after <linux/*.h> ones
- revert the indentation from "static <newline> xxx to "static xxx"
<hadi@shell.cyberus.ca>
[NET]: Fix OOPSes with RSVP.
<herbert@gondor.apana.org.au>
[IPSEC]: Add encap_oa member to struct xfrm_encap_tmpl.
<herbert@gondor.apana.org.au>
[IPSEC]: Close SADB_ADD race and add XFRM_MSG_UPDSA (SADB_UPDATE equivalent).
<whydoubt@yahoo.com>
[NET]: Trivial patch to netfilter Kconfig.
<solt@dns.toxicfilms.tv>
[IPV4]: Be more verbose about invalid ICMPs sent to broadcast.
<shemminger@osdl.org>
[NET]: Update teql scheduler to dynamic net device.
- dynamically allocate and free the network device.
previously, used static network device.
- support multiple equalizers (default one) via module parameter (max_equalizers)
previously, limited to one.
<willy@debian.org>
[PATCH] PCI: unconfuse arch/i386/pci/Makefile
I was looking in this Makefile for link order when my head began to hurt.
Apparently you can't have both NUMAQ and VISWS selected, so getting rid
of all the ifdefs/ifndefs like this should work.
<willy@debian.org>
[PATCH] PCI: pci_raw_ops devfn
Combine the dev and func arguments to pci_raw_ops into devfn which is
more natural all around.
<bunk@fs.tum.de>
[PATCH] PCI Hotplug: fix buggy comparison in cpqphp_pci.c
I don't understand the code good enough to be sure my patch is correct,
but the current code is definitely buggy:
0xFF is the maximum value for an u8, so tdevice < 0x100 is _always_
true.
<henk@god.dyndns.org>
[PATCH] I2C: add i2c-prosavage driver
Using the MMIO method now, the driver should be able to handle multiple
video cards.
The driver could potentialy also handle other s3 devices. You can try this
by adding more pci id's to the prosavage_pci_tbl.
<willy@org.rmk.(none)>
[SERIAL] Missing Kconfig dependencies
If one turns off SERIAL_8250, these items shouldn't be selectable.
Also gets the indentation right in `make oldconfig'.
<dlstevens@us.ibm.com>
[IPV{4,6}]: Fix "slow multicast on 2.5.69" bug.
<rmk@flint.arm.linux.org.uk>
[SERIAL] 8250_cs update - remove serial_info_t
<greg@kroah.com>
I2C: add i2c-ali1535 bus driver
Ported from the i2c cvs tree.
<rmk@flint.arm.linux.org.uk>
[SERIAL] 8250_cs update - remove work queue
Remove the work queue for serial_remove; events always happen
in process context now so the work queue gains us nothing.
<rmk@flint.arm.linux.org.uk>
[SERIAL] 8250_cs update - incorporate pcmcia-cs 3.1.34 serial_cs fixes
- add buggy_uart parameter
- use detected Vcc values, not CIS Vcc values
- handle OxSemi OXCF950 ports
<rusty@rustcorp.com.au>
[PATCH] {PATCH 2.5.72] Use mod_timer in drivers_net_wan_sdla_fr.c
From: Vinay K Nallamothu <vinay-rc@naturesoft.net>
<rusty@rustcorp.com.au>
[PATCH] [PATCH 2.5.72] Use mod_timer in drivers_net_wan_sdla_ppp.c
From: Vinay K Nallamothu <vinay-rc@naturesoft.net>
<rusty@rustcorp.com.au>
[PATCH] [PATCH 2.5.72] Use mod_timer in drivers_net_wan_sdla_x25.c
From: Vinay K Nallamothu <vinay-rc@naturesoft.net>
<rusty@rustcorp.com.au>
[PATCH] [PATCH 2.5.72] Use mod_timer in drivers_net_wan_sdla_chdlc.c
From: Vinay K Nallamothu <vinay-rc@naturesoft.net>
<romieu@fr.zoreil.com>
[netdrvr sk98lin] PCI API conversion, and some cleanups
- PCI API init style conversion for drivers/net/sk98lin/skge.c;
- new helpers: SkGeDev{Init/CleanUp};
- sk_devs_lock moved around as it's needed early.
Compiles without error. Untested.
<oliver@neukum.org>
[PATCH] USB: highdma support for kaweth
this tells the network layer that we can DMA from high memory
if the host controller supports it.
- enable 64bit DMA on platforms that support it
<davidm@tiger.hpl.hp.com>
ia64: Rename init_thread_union to init_task_mem to avoid conflicting
declration in <linux/sched.h>.
<davidm@tiger.hpl.hp.com>
Drop pcibios_update_resource() #warning.
<davidm@tiger.hpl.hp.com>
ia64: Rename irq_desc() to irq_descp() to avoid conflict with variable
of same name declared in linux/irq.h. The expectation is that
this variable will be removed eventually and then irq_descp()
can be renamed to irq_desc() again. But for now, this makes it
easier to compile against Linus' source tree.
<davidm@tiger.hpl.hp.com>
ia64: Update defconfig. Add missing include to <asm-ia64/tlb.h>. Fix
compiler warning in perfmon.c.
<anton@samba.org>
ppc64: remove memset/memcpy function prototypes in eeh header file
<anton@samba.org>
ppc64: memset destination if access_ok fails in copy_from_user
<anton@samba.org>
ppc64: pci domain support
<davem@nuts.ninka.net>
[XFS]: Fix build error on big-endian.
<anton@samba.org>
ppc64: fix some compile warnings
<paulus@samba.org>
PPC32: Implement 2-argument show_stack().
<anton@samba.org>
ppc64: add dabr and iabr cpu features
<anton@samba.org>
ppc64: merge Paul's interrupt-map parsing code
<yoshfuji@linux-ipv6.org>
[IPV6] use macro for maximum payload length
<yoshfuji@linux-ipv6.org>
[IPV6] Fix large packet length check
There were two errors in length check in the output path.
We could not send large packet (65535bytes).
This patch fixes the problem.
<rth@kanga.twiddle.net>
[ALPHA] Don't print all interrupts in /proc/stat.
From Jeff Wiedemeier.
<jgrimm@touki.austin.ibm.com>
[SCTP] Add ASSOCINFO and RTOINFO sockopts. (Ryan Layer and Anup Pemmaiah)
Submitted by pemmaiah@cc.usu.edu and rmlayer@us.ibm.com.
<jgrimm@touki.austin.ibm.com>
[SCTP] Fix wrong logic in hlist change.
Otherwise, we leak bind_buckets.
<jgrimm@touki.austin.ibm.com>
[SCTP] Remove some unused source modules.
We use crypto api. Get rid of our own versions of hash code.
<jgrimm@touki.austin.ibm.com>
[SCTP] Minor warning cleanups.
<jgrimm@touki.austin.ibm.com>
[SCTP] More typedef removals.
sctp_cookie_t -> sctp_cookie, sctp_signed_cookie_t ->sctp_signed_cookie_t.
<jgrimm@touki.austin.ibm.com>
[SCTP] More typedef & name cleanup.
<jgrimm@touki.austin.ibm.com>
[SCTP] Shorten SACK generation path.
1) Remove sctp_tsnmap_update_pending from the SACK path. The
pending_data variable is only used by a socket option, so just
calculate it when needed rather than the I/O path.
2) Instead of walking the tsnmap twice, change the interface to
allow walking once.
3) Only report a fixed number of gabs and reserve this room in the
association, saving us a kmalloc every sack generation.
TBD: Still need to kick out of tanmap walking early if we get to
max_tsn_seen.
<jgrimm@touki.austin.ibm.com>
[SCTP] Don't search gap ack blocks past max_tsn_seen.
There is no need to keep walking the tsnmap past the
max_tsn_seen, so don't.
<neilb@cse.unsw.edu.au>
[PATCH] Fix bug in rpc cache_clean introduced by previous patch
Having a 'continue' at the end of this look it pointless... it should
be a break.
<neilb@cse.unsw.edu.au>
[PATCH] Always flush rpc caches after an update
..as the update might have set an expiry date in the past
and we want it to be removed instantly.
<neilb@cse.unsw.edu.au>
[PATCH] Include update mode in declaration of RPC information caches.
The sunrpc/cache.c caches which store nfsd export information
can be updated either "inplace" or by replacing the entry.
replacement is needed when an entry hold a reference to some
other object, so the reference counts work properly.
"inplace" can be used when no such references are held, and should be
used when the object could be refered to by another cache (as otherwise
the other cache would have to be updated whenever this one is).
Previously the type of update (inplace or replace) was specified
as an argument to the *_lookup operation. This too easily lead to
inconsistancies.
With this patch, the update mode is specified when the cache is
declared.
<neilb@cse.unsw.edu.au>
[PATCH] Add some tracing when showing the content of an RPC cache.
The /proc/net/rpc/*/content files now will show
entries that are still in the cache, but are either
expired or negative, as comment.
ip_map_show is enhance to work if called with a negative
or incomplete entry.
Also if cache debugging is enabled, the expiry time and
refcount of each entry will be included in a comment.
<neilb@cse.unsw.edu.au>
[PATCH] Define cache_show methods for export and filehandle cache in nfsd.
<neilb@cse.unsw.edu.au>
[PATCH] Use schedule_work to regular cache cleaning
Cleaning of the export caches is currently done by idle
nfsd threads which isn't very reliable.
This patch makes use of work_queues to do it all inside
cache.c
<neilb@cse.unsw.edu.au>
[PATCH] Fix byte counting for NFSv3 readdir replies
The amount of free space is calculated wrongly so
nfsv3 readdir replies are shorted than they could be.
<neilb@cse.unsw.edu.au>
[PATCH] Get buf size and page count right for RPC services.
The old calculations BUGed on 64k PAGESIZE machines.
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] do not take ide_setting_sem under ide_lock
From -mm tree, fixes oops when removing ide drivers.
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] fix use-after-free in ide_unregister()
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] build fix for pdc4030 without taskfile IO
Noticed by Arkadiusz Miskiewicz.
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] fix compilation of NS SC1x00 driver without procfs
Noticed by Adrian Bunk.
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] call setup_driver_defaults() only once for each driver
<mikpe@csd.uu.se>
[PATCH] enable local APIC on P4
The current local APIC code refuses to enable the local APIC
on a P4 if the BIOS booted us with the local APIC disabled.
This patch removes this unnecessary restriction. Please apply.
Most P4 machines do boot with the local APIC enabled, but
Keith Owens reported that the P4 based Compaq Evo N800v
disables the local APIC, even though the machine actually
works if Linux enables it.
It is possible that some P4 machines with broken BIOSen
were saved by our refusal to enable the local APIC. We
can handle them via the DMI blacklist rules instead.
<ambx1@neo.rr.com>
[PNP] pnp_init_resource_table compile fix
In the last release, this api was accidently changed and therefore
affected some drivers. This patch corrects the issue by renaming
the api back to pnp_init_resource_table.
<ambx1@neo.rr.com>
[PNP] Locking Fixes
The semaphore in pnp_init_resource_table is not needed and, in some
cases, can cause resource management lockups. This patch removes the
improperly placed semaphore.
<davem@nuts.ninka.net>
[SEQ_FILE]: Export seq_path() to modules.
<greg@kroah.com>
[PATCH] USB: add support for 50 baud to io_edgeport.c
<kpc-usbdev@gelato.uiuc.edu>
[PATCH] USB: Desknote/ECS UCR-61S2B card reader (2.5.72 patched)
This is for 2.5.72 with the US_PR_DEVICE / US_SC_DEVICE patch in place.
Tested and working.
<oliver@neukum.org>
[PATCH] USB: make kaweth deal with ENOMEM
this fixes the logic kaweth uses to deal with ENOMEM from
usb_submit_urb(). Using the interrupt endpoint's completion
handller is longer an option because automagic resubmission
has been removed. Thus we use workqueues which can be delayed
so that kswapd can do its job and can use GFP_NOIO which is much
likelier to succeed.
<bernie@develer.com>
[IPV4]: Trim the includes used in util.c
<ehabkost@conectiva.com.br>
[PATCH] Fix compilation of ip2main
The following patch fix compilation of drivers/char/ip2main.c. It was
broken by the removal of pci_present().
It just adds open and closing braces around the code that declares the
pci_dev_i variable. The rest of the patch just change the indentation.
<willy@debian.org>
[PATCH] PCI: [PATCH] pcibios_scan_acpi()
On Mon, Jun 23, 2003 at 02:39:05PM -0700, Greg KH wrote:
> > How about acpi_scan_pci_bus_root()?
>
> I agree, that sounds better.
I think it's too long ... so unless anyone has a better idea, I'm going with
pci_acpi_scan_root(). Here's the patch, presented in patch -p1 format to
make greg's scripts happy ;-)
ia64 needs to be passed the pci domain and the acpi handle corresponding
to each root bus. Rather than change pcibios_scan_root to take additional
arguments, this patch introduces pci_acpi_scan_root().
<laforge@netfilter.org>
`cat msg`
<laforge@netfilter.org>
[NETFILTER]: Forward port cosmetic fixes from 2.4.x
<laforge@netfilter.org>
[NETFILTER]: Enhancement for ip{,6}_tables, add new /proc files.
<laforge@netfilter.org>
[NETFILTER]: Fix conntrack master_ct refcounting.
<willy@debian.org>
[PATCH] PCI documentation
Update the PCI Documentation to reflect some of the functions which have
recently been added and removed.
Index: Documentation/pci.txt
===================================================================
RCS file: /var/cvs/linux-2.5/Documentation/pci.txt,v
retrieving revision 1.4
<sfrost@snowman.net>
[NETFILTER]: Add "recent" iptables facility.
<ink@jurassic.park.msu.ru>
[NET]: Need sys_socket cond_syscall() entry.
<Andries.Brouwer@cwi.nl>
[PATCH] loop.c - part 2 of N
This does the following:
- IV value is current 512-byte sector relative to start of loop
container file. This is what all cryptoloop people have done, if I
am not mistaken. Andi or others - if you can demonstrate the need
for a more flexible setup an additional ioctl field may be needed. I
hope we can do without.
- made some things static
- made lo_offset a loff_t
- added lo_sizelimit
If one wanted a (crypto)loop somewhere inside a container file, the
old code allowed a starting offset, but no size, so that the
cryptoloop always extended to the end of the container file. This
field allows one to select an arbitrary interval. Note that this
changes struct loop_info64.
- improve error handling of loop_init()
- removed the unused typedef transfer_proc_t.
- added a define for LO_CRYPT_CRYPTOAPI
<rddunlap@osdl.org>
[PATCH] unexpected IO-APIC update
Recently there has been a rash of Unexpected IO APIC reports on the
linux-smp mailing list. Most of the most recent ones are due to some
newer Intel chipsets (865, 875).
The IO APIC Version register doesn't indicate the differences in these
IO APICs.
I have an patch that addresses these chipsets. It has been tested by a
few people with good results and has been blessed by Maciej Rozycki.
Other than conditionally decoding IO APIC registers 2 and 3, we could
alternately ignore them since Linux doesn't use the values for anything
other than printing them.
This patch ignores IO APIC register 2 if it's the same value as IO APIC
register 1. It also reads IO APIC register 3 if the IO APIC version is
>= 0x20, but some chipsets don't support this register, so it is also
ignored if its value if the same as IO APIC register 1 or 2.
Another possible(?) alternative is to read the PID/VID of the device to
determine which registers it supports. However, PCI devices have not
been scanned at this point in init, so it would require scanning PCI
config space directly and I don't yet see the point of doing that.
Oh, and the UNEXPECTED_IO_APIC() function doesn't print anything in
2.5.current and I didn't change that.
<daniel.ritz@gmx.ch>
[PATCH] alloc_etherdev for 3c574_cs
net_device is no longer allocated as part of the driver's private structure,
instead it's allocated via alloc_netdev. compile tested only since no hardware
against 2.5.73-bk
-daniel
===== drivers/net/pcmcia/3c574_cs.c 1.17 vs edited =====
<daniel.ritz@gmx.ch>
[PATCH] alloc_etherdev for 3c589_cs
net_device is no longer allocated as part of the driver's private structure,
instead it's allocated via alloc_netdev. compile tested only since no hardware
against 2.5.73-bk
-daniel
===== drivers/net/pcmcia/3c589_cs.c 1.17 vs edited =====
<daniel.ritz@gmx.ch>
[PATCH] alloc_etherdev for fmvj18x_cs
net_device is no longer allocated as part of the driver's private structure,
instead it's allocated via alloc_netdev. compile tested only since no hardware
against 2.5.73-bk
-daniel
===== fmvj18x_cs.c 1.21 vs edited =====
<daniel.ritz@gmx.ch>
[PATCH] alloc_etherdev for nmclan_cs
net_device is no longer allocated as part of the driver's private structure,
instead it's allocated via alloc_netdev. compile tested only since no hardware
against 2.5.73-bk
-daniel
===== nmclan_cs.c 1.14 vs edited =====
<daniel.ritz@gmx.ch>
[PATCH] alloc_etherdev for smc91c92_cs
net_device is no longer allocated as part of the driver's private structure,
instead it's allocated via alloc_netdev. compile tested only since no hardware
against 2.5.73-bk
-daniel
===== smc91c92_cs.c 1.18 vs edited =====
<scott.feldman@intel.com>
[PATCH] Remove CAP_NET_ADMIN check for SIOCETHTOOL's
dev_ioctl already checks capable(CAP_NET_ADMIN), so no need to do so in
drivers.
<shemminger@osdl.org>
[PATCH] 2.5.70 - eepro100 - use alloc_etherdev
Ignore earlier patch -- this one locks and free's as appropriate.
Tested on 2.5.72 with SMP.
Of course, it begs the question why have two (now three) versions of drivers for
the same hardware...
<davem@nuts.ninka.net>
[USB]: Use linux/dma-mapping.h not asm/dma-mapping.h in kaweth.c
<davem@nuts.ninka.net>
[PCI]: Export pci_enable_device_bars to modules.
<davem@nuts.ninka.net>
[SPARC64]: Update defconfig.
<davem@nuts.ninka.net>
[SERIAL]: Sanitize sparc serial console configuration.
<davem@nuts.ninka.net>
[SPARC64]: Update defconfig.
<paulus@samba.org>
PPC32: remove check for ERESTARTNOHAND in syscall return path.
This error is handled in the signal delivery code and should never be
returned from a syscall unless a signal is pending. Grepping seems to
indicate that that is in fact the case (but not for ERESTARTSYS, but
that is another problem).
<jgrimm@touki.austin.ibm.com>
[SCTP] Peeled off/accepted sockets not in the right bind_bucket.
hlist changes caused the peeloff testcase to fail. Investigation shows
that the peeloff sockets is not bound into bind_bucket, so the
bucket has gone away (original socket closed). Fixing this, shows
a problem that inet->num wasn't set on peeled off sockets, so autobind
kicks in creating a new bind_bucket. Ugh. One bug had been
hiding the other one all this time.
Fix 1) peeledoff/accepted sockets need to have their own socket woven
into the bind_bucket->owner list. 2) Set inet->num, so autobind
doesn't think it needs to kick in.
<shemminger@osdl.org>
[NET] remove skb_linearize from igmp.c
<rddunlap@osdl.org>
[PATCH] Unionize IO-APIC registers
[ Registers of the world, unite! ]
This makes the IO-APIC data structures use unions, so that we can
cleanly access them both as flat "raw" values, and as the bitmap
sub-entries.
<jejb@raven.il.steeleye.com>
SCSI: abstract mode_sense 6 and 10 out completely
Move the mode_sense request routines to a central location and make
all block device consumers use it. Also abstract the header as
part of the return to hide the 6/10 differences.
<jejb@raven.il.steeleye.com>
scsi_mid_low_api.txt update
From Douglas Gilbert <dougg@torque.net>
<bunk@fs.tum.de>
[PATCH] remove an unused variable from fd_mcs.c
The patch belowremoves an unused variable from drivers/scsi/fd_mcs.c .
I've tested the compilation with 2.5.72-mm2.
<bunk@fs.tum.de>
[PATCH] remove an unused function declaration from sym53c416.h
The patch below removes a declaration for a function that is no longer
present.
I've tested the compilation with 2.5.72-mm2.
<bunk@fs.tum.de>
[PATCH] ibmmca cleanup
The patch below does the following:
- remove an unused static function
- removes the declaration of a function that is no longer present
- removes a variable declaration that shadows a function parameter
I've tested the compilation with 2.5.72-mm2.
<bunk@fs.tum.de>
[PATCH] remove an unused function from nsp32.c
The patch below removes an unused function from nsp32.c .
I've tested the compilation with 2.5.72-mm2.
<bunk@fs.tum.de>
[PATCH] seagate cleanup
The patch below does the following cleanups on
drivers/scsi/seagate.{c,h}:
- remove two unused functions
- remove a function declaration for a function that is no longer present
I've tested the compilation with 2.5.72-mm2.
<rusty@rustcorp.com.au>
[PATCH] Trivial patch for scsi_error.c
From: Alan Stern <stern@rowland.harvard.edu>
<hch@lst.de>
[PATCH] check for can_queue != 0 in scsi_host_alloc
This is to give a proper warning if someone tries to load an
unconverted old-style driver.
<dougg@torque.net>
[PATCH] REQUEST SENSE 254->252 byte response
SPC-3 (rev 13) says that 252 bytes in the maximum (and
recommended) length for a REQUEST SENSE reponse.
Linux asks for 254 bytes in scsi_error.c .
That number was not specified in SPC-2 (although the
allocation length field is 1 byte thus limiting it to
255). Seems as though some numbers are being rounded
down to be multiples of 4.
<bunk@fs.tum.de>
[PATCH] NCR53C9x compile fix
From: Geert Uytterhoeven <geert@linux-m68k.org>
<bunk@fs.tum.de>
[PATCH] integer constants in sym53c8xx_2/sym_glue.c too big for int
The patch below postfixes a constant in sym53c8xx_2/sym_glue.c with ULL,
on 32 bit archs this constant is too big for an int.
<bunk@fs.tum.de>
[PATCH] postfix two constants in ips.c with ULL
The patch below postfixes two constants in ips.c with ULL, on 32 bit
archs this constant is too big for an int.
The cast doesn't do the right thing, 0xffffffffffffffff is in C an int
and the cast casts 0xffffffffffffffff interpreted as an int to an u64.
<patmans@us.ibm.com>
[PATCH] fix return value of scsi_device rescan attribute
When writing to the rescan attribute, return count as result, otherwise
some user apps might retry the write forever.
And remove the read capability of the attribute.
<markh@osdl.org>
[PATCH] clean up aacraid use of SCSI constants
<davidm@napali.hpl.hp.com>
[PATCH] small patch for sym53c8xx_2
I thought we had an agreement for a long time already that the use of
dma64_addr_t in the sym53c8xx_2 driver was wrong, but it's still
there.
<stern@rowland.harvard.edu>
[PATCH] Fix scsi host attributes
The shost_attrs stuff looks fine, expect for two points.
1. The scsi_sysfs_modify_shost_attribute() and
scsi_sysfs_modify_sdev_attribute() functions appear to be written a bit
carelessly. Below is a patch that: permits modification of the first
attribute in the list, allocates a new list with entries having the
correct size, copies the correct number of entries from the old list, and
wraps excessively long source lines.
2. More importantly, the current organization of the code has a
serious problem. The SCSI core does not modify the host driver when the
reference count for either shost->class_dev or shost->host_gendev drops to
0. Without knowing that, it is unsafe for the driver ever to deallocate a
private host data structure, since a user process may continue to hold a
reference to an open attribute file indefinitely, even after
scsi_unregister() has returned.
<hch@lst.de>
[PATCH] add scsi_driver.h
include/scsi/scsi_driver.h contains æverything related to upper
level drivers. Unlike the other header moves there's no compatiblity
this time as it's easy to fix up the few users.
<tonyb@cybernetics.com>
[PATCH] make sym53c8xx_2 not reject autosense IWR
This patch makes sym53c8xx_2 silently ignore the Ignore Wide Residue
message on autosense commands rather than rejecting it. This makes
the SCSI communications cleaner for targets that return an odd number
of sense bytes.
<jgarzik@redhat.com>
[irda] add driver for mips Alchemy Au1000 SIR/FIR
Submitted by Ralf Baechle <ralf@linux-mips.org>
<ralf@linux-mips.org>
[netdrvr] add driver "meth", for SGI O2 MACE fast eth
<ralf@linux-mips.org>
[netdrvr] sgiseeq update
<ralf@linux-mips.org>
[netdrvr] update ioc3_eth
<ralf@linux-mips.org>
[netdrvr] update declance
<ralf@linux-mips.org>
[netdrvr] au1000_eth update
<ralf@linux-mips.org>
[netdrvr] update sb1250-mac
<ralf@linux-mips.org>
[netdrvr tulip] add mips cobalt support
<ralf@linux-mips.org>
[netdrvr] misc small mips updates
Add missing CONFIG_TC35805 entry to Kconfig.
Update CONFIG_NET_SB1250_MAC Kconfig entry.
Minor cosmetic updates to gt96100eth.
<anton@samba.org>
ppc64: remove ERESTARTNOHAND code in syscall exit, from ppc32
<willy@debian.org>
[PATCH] PCI: more PCI gubbins
I noticed we have a couple of redundancies in drivers/pci/Makefile,
have a patch...
<willy@debian.org>
[PATCH] PCI: fixes for pci/probe.c
- Combine pci_alloc_primary_bus_parented into pci_scan_bus_parented.
- Move the EXPORT_SYMBOL for pci_root_buses up to its definition.
- Don't EXPORT_SYMBOL pci_scan_bus since it's a static inline.
- Add the pci_domain_nr() to the sysfs name for this bus.
<greg@kroah.com>
[PATCH] PCI Hotplug: fix core problem with kobject lifespans.
Added needed release function, now all pci hotplug drivers need to implement
it...
<greg@kroah.com>
[PATCH] IBM PCI Hotplug: fixes found by sparse
<greg@kroah.com>
PCI Hotplug: add fake PCI hotplug driver.
Useful for testing hotplug issues with pci drivers.
<davej@codemonkey.org.uk>
[CPUFREQ] speedstep cleanups.
From Dominik Brodowski.
- separate functions which might be useful for speedstep-piix4,
speedstep-via or speedstep-bios into a new speedstep-lib.c.
- clean up speedstep-ich as it will only be used for ICH-based chipsets
in future.
- remove now-obsolete speedstep_coppermine parameter
<davej@codemonkey.org.uk>
[CPUFREQ] Speedstep support for P4M/533
From Dominik Brodowski.
Add support for newest "Mobile Pentium 4-M" and the new "Mobile Pentium 4 with
533 MHz FSB" processors.
<davej@codemonkey.org.uk>
[CPUFREQ] Silence debug output on centrino speedstep driver.
<davej@codemonkey.org.uk>
[AGPGART] Add missing pte masking in NVIDIA nForce driver.
Noticed by Marcelo Penna Guerra.
<shemminger@osdl.org>
[NET][IPMR] ipmr fixes
These patches fix ip multicast route (ipmr) on 2.5.73.
1 - Trivial C99 initialization
2 - Change functions/variables to static
3 - Drop and reacquire RTNL in error path
4 - Use time_after()
5 - Use alloc_netdev
6 - Fix OOPS on dropped packets
7 - Get rid of skb_linearize
Tested on 8-way SMP by bringing up pimd.
<davej@codemonkey.org.uk>
[AGPGART] SiS 655 support.
Needs more testing, especially in x8 mode.
<akpm@digeo.com>
[PATCH] GCC 2.95.4 needs the spinlock workaround
From: Mikael Pettersson <mikpe@csd.uu.se>
2.5.73 removed the workaround needed to prevent gcc-2.95.x from
miscompiling spinlocks on UP. It turns out that some versions of
gcc-2.95 still do have problems with empty structs, so re-introduce
the workaround.
<akpm@digeo.com>
[PATCH] show_stack fix
sysrq-T currently displays the same stack trace for every process.
Teach show_stack() to look in the passed task_struct first if the caller did
not pass in a stack address.
<akpm@digeo.com>
[PATCH] setscheduler needs to force a reschedule
From: Robert Love <rml@tech9.net>
Basically, the problem is that setscheduler() does not set need_resched
when needed. There are two basic cases where this is needed:
- the task is running, but now it is no longer the highest
priority task on the rq
- the task is not running, but now it is the highest
priority task on the rq
In either case, we need to set need_resched to invoke the scheduler.
<akpm@digeo.com>
[PATCH] misc fixes
- unused var warning in pnp_add_irq_resource()
- unused var in fd_mcs.c (Adrian Bunk)
- remove dead code in i810_main.c (a u8 cannot exceed 255) (Adrian Bunk)
- don't truncate dma_addr_t's in gdth.c (Jes Sorensen)
- vgastate.c needs vmalloc.h (Geert Uytterhoeven <geert@linux-m68k.org>)
- revert bogus test from rd_open() - it was a 2.4 forward-port, and 2.5
doesn't need it. (The gendisks aren't registered, we cannot get there
anyway).
<akpm@digeo.com>
[PATCH] AT_SECURE auxv entry
From: Stephen Smalley <sds@epoch.ncsc.mil>
This patch adds an AT_SECURE auxv entry to pass a boolean flag indicating
whether "secure mode" should be enabled (i.e. sanitize the environment,
initial descriptors, etc) and allows each security module to specify the
flag value via a new hook.
New userland can then simply obey this flag when present rather than
applying other methods of deciding (sample patch for glibc-2.3.2 can be
found at http://www.cs.utah.edu/~sds/glibc-secureexec.patch).
This change enables security modules like SELinux to request secure mode
upon changes to other security attributes (e.g. capabilities,
roles/domains, etc) in addition to uid/gid changes or even to completely
override the legacy logic.
The legacy decision algorithm is preserved in the default hook functions
for the dummy and capability security modules.
Credit for the idea of adding an AT_SECURE auxv entry goes to Roland
McGrath.
<akpm@digeo.com>
[PATCH] common name for the kernel DSO
From: David Mosberger <davidm@napali.hpl.hp.com>
Give the ia32 vsyscall DSO the same name as ia64's.
<akpm@digeo.com>
[PATCH] get_unmapped_area() speedup
From: Ingo Molnar
Apparently our thread-creation performance has gone down the tubes again,
because the mm.free_area_cache search heuristic broke.
The initial, more naive hole-cache patch helped the testcode in the
beginning. Then after some point glibc started creating a 'small hole' in
the vmas, which hole was _below_ the thread stacks, and which hole thus
prevented the intended operation of the cache.
The new code solves the problem by relaxing the 'smallest address hole cache'
rule a bit, the cache is now not re-set at every get_unmapped_area() time,
it's only re-set during unmaps. It's also re-set if there are no allocatable
mappings at all - ie. correctness is not affected.
<akpm@digeo.com>
[PATCH] dentry->d_count fixes: d_invalidate
From: Maneesh Soni <maneesh@in.ibm.com>
- d_invalidate() can incorrectly return success instead of returning -EBUSY
as we can have situations where lockless d_lookup has found a dentry
successfully before d_invalidate drops it
<akpm@digeo.com>
[PATCH] dentry->d_count fixes: nfs_unlink
From: Maneesh Soni <maneesh@in.ibm.com>
- nfs_unlink() can race with lockless d_lookup() as d_lookup() can
successfully lookup a dentry for which nfs_unlink() can assume that no one
else is using and can go ahead and do nfs_safe_remove() on it. By using
per dentry lock, it is solved as we d_lookup() will fail the lookup for
unhashed dentries.
<akpm@digeo.com>
[PATCH] dentry->d_count fixes: hpfs
From: Maneesh Soni <maneesh@in.ibm.com>
- hpfs_unlink() can race with lockless d_lookup(), as we can have situations
where d_lookup() has successfully looked-up a dentry and at the sametime
hpfs_unlink()--->d_drop() has dropped it. Taking the per dentry lock
before checking the d_count in hpfs_unlink() solves this race condition.
<yoshfuji@linux-ipv6.org>
[IPV6] DAD has to be destined to solicited node mulitcast address.
Check if DAD is destined for solicited node multicast address
as RFC2461 required.
<akpm@digeo.com>
[PATCH] workaround for smb_proc_getattr oops
From: Zwane Mwaikambo <zwane@linuxpower.ca>
smbfs tends to oops over a null server->ops->getattr in smb_proc_getattr().
Urban says:
In 2.5 the server->ops is initialized when smbfs gets a connection, to
match whatever the server is capable of or not. This happens after the
mount syscall so smbfs is then mounted but not usable.
Not sure if smb_lookup is always called before any other operation that
uses server->ops. If it is then it would be enough to have a test there.
Otherwise I will just change all users of server->ops to verify the
pointer first and return -EIO or something.
Al Viro says (paraphrasing)
ugh, we need mount2().
It doesn't look to me like we'll be getting mount2() in the 2.6 timeframe.
Zwane's patch implement's Urban's workaround.
<akpm@digeo.com>
[PATCH] Column counting fix in n_tty.c
From: Chris Heath <chris@heathens.co.nz>
Here's a column counting bug that was lurking in a corner of n_tty.c.
<akpm@digeo.com>
[PATCH] normalise node load for NUMA
From: Andrew Theurer <habanero@us.ibm.com>
This patch ensures that when node loads are compared, the load value is
normalised. Without this, load balance across nodes of dissimilar cpu
counts can cause unfairness and sometimes lower overall performance.
For example, a 2 node system with 4 cpus in the first node and 2 cpus in
the second. A workload with 6 running tasks would have 3 tasks running on
one node and 3 on the other, leaving one cpu idle in the first node and two
tasks sharing a cpu in the second node. The patch would ensure that 4
tasks run in the first node and 2 in the second.
I ran some kernel compiles comparing this patch on a 2 node 4 cpu/2 cpu
system to show the benefits. Without the patch I got 140 second elapsed
time. With the patch I get 132 seconds (6% better).
Although it is not very common to have nodes with dissimilar cpu counts, it
is already happening. PPC64 systems with partitioning have this happen,
and I expect it to be more common on ia32 as partitioning becomes more
common.
<akpm@digeo.com>
[PATCH] compat_sys_old_getrlimit() depends on
From: David Mosberger <davidm@napali.hpl.hp.com>
compat_sys_old_getrlimit() depends on sys_old_getrlimit() and the patch
below updates the guarding #ifdef accordingly.
<akpm@digeo.com>
[PATCH] ext3: fix page lock vs journal_start ranking bug
ext3_block_truncate_page() is calling grab_cache_page() inside a JBD
transaction. This is wrong, because transactions nest inside lock_page().
The deadlock is against shrink_list->ext3_journalled_writepage->journal_start.
This was not noticed before because we never used to journal writepage() data
in journalled-data mode. And because the deadlock against
generic_file_write() is covered up by i_sem.
Rework things so that we lock the page prior to starting a transaction.
<akpm@digeo.com>
[PATCH] ext3: fix memory leak
We need to unconditionally brelse() the buffer in there, because
journal_remove_journal_head() leaves a ref behind.
release_buffer_page() does that. Call it all the time because we can usually
strip the buffers and free the page even if it was not marked buffer_freed().
Mainly affects data=journal mode
<akpm@digeo.com>
[PATCH] correct mail addresses for visws support
From: Andrey Panin <pazke@donpac.ru>
this trivial patch changes mailing list address for visws subarch support
along with some occurences of my old email addresses.
<yoshfuji@linux-ipv6.org>
[IPV6] DAD must not have source link-layer option
Check if DAD does not have source link-layer address option;
RFC2461 7.1.1.
<akpm@digeo.com>
[PATCH] NCR53C9x compile fix
From: Geert Uytterhoeven <geert@linux-m68k.org>
NCR53C9x SCSI: Fix compilation after breakage in 2.5.71
<akpm@digeo.com>
[PATCH] htree: set the dir index bit in the right place
From: Alex Tomas <bzzz@tmi.comex.ru>
Don't set the directory's index flag until we know that we're doing ahead
with the directory modification.
<akpm@digeo.com>
[PATCH] export flush_tlb_all for drm modules
From: Jan Dittmer <j.dittmer@portrix.net>
This adds an export for flush_tlb_all to i386_ksyms.c. The drm modules
miss this, when compiling for SMP.
I changed Jan's patch to use EXPORT_SYMBOL_GPL.
<akpm@digeo.com>
[PATCH] Typo after 8250_cs update (SERIAL)
From: Francois Romieu <romieu@fr.zoreil.com>
s/GetConfiguration/GetConfigurationInfo/
<sfr@canb.auug.org.au>
[PATCH] fix type in compat_sys_fcntl64
[Pointed out by Bjorn Helgaas via Arun Sharma]
This fixes an obvious cut and paste error in my original patch.
<jejb@raven.il.steeleye.com>
SCSI 53c700: add module_exit routine otherwise module isn't removable
<jejb@raven.il.steeleye.com>
Add remove method to lasi700.c
<davem@nuts.ninka.net>
[NET]: Define LL_RESERVED_SPACE in terms of HH_DATA_MOD.
<romieu@fr.zoreil.com>
[NETFILTER]: Fix leaks in error paths of ip_recent_ctrl.
<yoshfuji@linux-ipv6.org>
[IPV6]: Inappropriate static variable in net/ipv6/ndisc.c
<bdschuym@pandora.be>
[NETFILTER]: Missing return in arp_packet_match().
<bdschuym@pandora.be>
[NETFILTER]: Add arptables mangle module.
<rob@osinvestor.com>
[SPARC]: Fix LIBS_Y.
<rob@osinvestor.com>
[SPARC]: Do not use __builtin_trap() on sparc until gcc is fixed.
<davem@nuts.ninka.net>
[TCP]: Sanitize initcwnd calculation, add new metrics.
1) Remove srtt etc. tests in tcp_init_cwnd, was buggy
anyways.
2) Add RTAX_INITCWMD route metric, use this in tcp_init_cwnd()
if non-zero.
3) Add RTAX_FEATURES (to enable/disable ECN/SACK/TIMESTAMPS
on a per-route basis), currently unused.
<yoshfuji@linux-ipv6.org>
[IPV6]: Make several ndisc private stuff static.
<dwmw2@infradead.org>
DiskOnChip Millennium Plus translation layer fixes:
- Fix geometry reporting.
- Avoid endless loop when deleting a Virtual Unit Chain.
<dwmw2@infradead.org>
Add missing prototype in drivers/mtd/chips/gen_probe.c
<ak@suse.de>
[PATCH] x86-64 merge for 2.5.73
Bring the x86-64 architecture code uptodate for 2.5.73.
One problem is that CONFIG_IDE_TASKFILE corrupts file systems on AMD 8111. It
may be worth to disable it in the configuration.
- Disable 32bit vsyscalls for now until all bugs can be fixed
- Fix warnings
- Fix NULL pointer reference in 32bit ptrace
- Timing fixes from John Stultz
- Sync show_stack prototype
- Sync nmi and floppy.h code (Mikael P.)
- Set proper defines for AGP
- Make Simics work again
- Scale unit in 32bit sysinfo (originally from ppc64)
<ak@suse.de>
[PATCH] Fix ACPI compilation for 2.5.73
Without this patch ACPI won't compile on AMD64 because of mismatched prototypes.
Andrew stated that this is the way he wants it to be fixed.
<ak@suse.de>
[PATCH] Change 64bit epoll ABI for AMD64
As discussed earlier. The 64bit epoll ABI on AMD64 is changed to
match 32bit. This way we avoid emulation overhead.
To catch old binaries I allocate new syscall slots.
<willy@debian.org>
[PATCH] remove *_segments() dummy functions again
Last November Linus applied a patch to remove the now-unused
*_segments() functions from all architectures ... but some of the newer
architectures escaped and still have them.
<jejb@raven.il.steeleye.com>
SCSI: Add missing scsi/scsi_driver.h file
<willy@debian.org>
[PATCH] Make SCSI selfcontained
Move all the SCSI Kconfig bits from arch/*/Kconfig into driver/scsi/Kconfig.
Also add notes about FireWire & USB.
<greg@kroah.com>
[PATCH] PCI Hotplug: pcihp_skeleton: fix delete bug and add release() callback
<greg@kroah.com>
[PATCH] PCI Hotplug: acpiphp: add release() callback
<greg@kroah.com>
[PATCH] PCI Hotplug: cpci: fix delete bug and add release() callback
<greg@kroah.com>
[PATCH] PCI Hotplug: cpqphp: add release() callback and other minor cleanups.
<greg@kroah.com>
[PATCH] PCI Hotplug: ibmphp: add release() callback and other minor cleanups
<mzyngier@freesurf.fr>
[PATCH] aha1740 update
The included patch updates the old aha1740 driver to some of the 2.5
APIs :
- Generic DMA API
- EISA probing API
- SCSI hotplug API
It's been heavily tested on x86 (UP and SMP) as well as alpha (UP) for
the past two months.
<willy@debian.org>
[PATCH] PCI: i386/pci/direct.c fixes
- Request resources before using them
- Don't allocate GFP_KERNEL memory with interrupts disabled
- Split pci_direct_init() into three functions to prevent it from
getting too long.
<willy@debian.org>
[PATCH] PCI: create pci_name()
This patch introduces pci_name() and converts slot_name into a pointer to
dev.bus_id.
<gerg@snapgear.com>
[PATCH] define KCORE_ELF in m68knommu/Kconfnig
Define missing type for CONFIG_KCORE_ELF in m68knommu/Kconfig.
<gerg@snapgear.com>
[PATCH] fix do_settimeofday() for 'struct timespec' argument
Modify m68knommu do_settimeofday() routine to take "struct timespec"
argument, and adjust code to handle nsec size quantities.
<bcollins@debian.org>
[PATCH] Update IEEE1394 (r972)
IEEE1394 : Kbuildify oui2c.
ALL : C construct cleanups, macro namespace cleanups.
ETH1394 : Limited multicast support. Minor fixes for IPv4 interop.
ETH1394 : Add ethtool support.
<yoshfuji@linux-ipv6.org>
[IPV6] Fixed fragment check in ip6_output.c:ip6_fragment()
MTU / alignment check in ip6_fragment() was wrong;
first_len was not correct.
<ahaas@airmail.net>
[NET] Remove some 0 initializers.
These small patches remove a number of '.maxlen = 0,' initializers.
<herbert@gondor.apana.org.au>
[XFRM] Set port/proto in acquire messages.
Also append policy spec to acquire message.
<hch@lst.de>
[PATCH] use generic dma direction bits in scsi
Make the *_data_direction flags of type enum dma_data_direction from
the generic dma mapping API. The SCSI_DATA_* defines are kept for
compatiblity and map to the dma mapping API values now.
scsi_to_pci_dma_dir and scsi_to_sbus_dma_dir are kept as stubs -
we define them to nothing as both the PCI and SBUS constants have
the same values as the generic dma mapping ones. Unfortunately
we can't check anymore whether someone messes this up as the values
are enumes now and not cpp defines.
<jejb@raven.il.steeleye.com>
Fix scsi drivers needing to include <linux/pci.h>
With the simplification of the DMA direction/SCSI data direction
linux/pci.h is no longer pulled in by scsi.h
<jejb@raven.il.steeleye.com>
Remove linux/pci.h dependency in SCSI 53c700
The consolidation of the SCSI data direction flags eliminate the
need for it.
<jejb@raven.il.steeleye.com>
Fix SCSI data direction issues in aha1740 merger
and also remove no longer used .command entry
<jejb@raven.il.steeleye.com>
Fix up data direction in SCSI abstracted mode sense
<greg@kroah.com>
PCI Hotplug: acpiphp: stupid typo fixes.
<jejb@raven.il.steeleye.com>
SCSI: Move can_queue == 0 check
Some HBA drivers don't set this until their ->detect routines,
so don't check for it until scsi_add_host
<dave@thedillows.org>
Fix misreporting of card type and spurious "already scheduled" messages.
<davem@nuts.ninka.net>
[NET]: Kill skb_linearize() and bogus feature flag settings in eth1394.c
<davem@nuts.ninka.net>
[TCP]: Handle lack of cached dst in tcp_init_cwnd().
<davem@nuts.ninka.net>
[TCP]: If we have a lot of time-wait sockets to kill, do it via workqueue.
<markh@osdl.org>
[PATCH] Fix aacraid status returns
aacraid was using the old and erroneously unshifted status return
codes. Switch it to use the new SAM_STAT_ codes that don't need
shifting.
<anton@samba.org>
[PATCH] remove a bogus check in sym2 driver
The sym2 driver has a check for a very broken bios where it seems
devices appear twice. This test is broken on a machine with PCI domains
since busnumber:devfn is not a unique identifier.
When we move to the scsi hotplug interface all this code will go away
but in the short term we need the following fix.
<neilb@cse.unsw.edu.au>
[PATCH] Use new svc_export_show to implement e_show for /proc/fs/nfs/exports
Also remove the path_buf that was passed around for
/proc/fs/nfs/exports as the existance of seq_path removes the need
for this.
<neilb@cse.unsw.edu.au>
[PATCH] Remove path buffer passed around by cache_show routines
this was need for paths, but now we have seq_path...
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server OPEN_CONFIRM
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
Add OPEN_CONFIRM functionality to the nfsv4 server, including a
preprocess_seqid_op function that will be used in subsequent patches.
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server Close state
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
Add share state processing to nfsd4_close. it includes some more
debug counters.
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server - open-downgrade
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
Add the opendowngrade call with share state processing. it includes
nfs4_preprocess_stateid_op() which will be used in read and write
state processing.
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server - Read "share" state
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
this patch adds share state processing to nfsd4_read().
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server - Write "share" state
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
this patch adds share state processing to nfsd4_write().
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server - setattr share state
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
this patch adds share state processing to nfsd4_setattr().
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server - missing locking
From: "William A.(Andy) Adamson" <andros@citi.umich.edu>
sorry. i forgot to lock the nfsv4 state in nfsd4_read, nfsd4_write, and
nfsd4_setattr.
<neilb@cse.unsw.edu.au>
[PATCH] NFSv4 server - Removed duplicate #define
Already defined in state.h
<neilb@cse.unsw.edu.au>
[PATCH] Provoide refrigerator support for nfsd
Call refrigerator() in svc_recv, so it is there for nfsd and
no longer needed explicitly in lockd.
<randy.dunlap@verizon.net>
[PATCH] remove IO APIC newline
This patch is to 2.5.73-bk4 and is purely cosmetic. Please apply.
It removes the blank line after "testing the IO APIC....":
<david@gibson.dropbear.id.au>
[PATCH] Fix compile with !CONFIG_VT
Architectures using the generic 32/64-bit ioctl() compatibility shims
will get a link error if CONFIG_VT is not defined, since the
compatbility ioctl() code calls functions in drivers/char/vt.c which
is only included in the build if CONFIG_VT is set.
This fixes the compile with a couple of #ifdefs:
<gerg@snapgear.com>
[PATCH] fix arguments of show_stack()
Fix the m68knommu version of show_stack(). It expects the task as an
argument.
<gerg@snapgear.com>
[PATCH] conditional ROMfs copy for M5206eLITE board
Make the ROMfs copy in the startup code for Motorola/M5206eLITE board
conditional on actually using a ROMfs setup.
<gerg@snapgear.com>
[PATCH] conditional ROMfs copy for NETtel/5272 board
Make the ROMfs copy in the startup code for NETtel/5272 board
conditional on actually using a ROMfs setup.
<rusty@rustcorp.com.au>
[PATCH] Use Local Percpu Macros for Local Percpu Variables
In general, it is more better to use get_cpu_var() and __get_cpu_var()
to access per-cpu variables on this CPU than to use smp_processor_id()
and per_cpu(). In the current default implemention they are equivalent,
but on IA64 the former is already faster, and other archs will follow.
<schwidefsky@de.ibm.com>
[PATCH] s390: base fixes
- Remove unused variables from smp.c.
- Reserve system call number 110 for sys_lookup_dcache.
- Fix show_trace.
- Remove superfluous asm include file.
- Add statfs64 structure.
<schwidefsky@de.ibm.com>
[PATCH] s390: 31 bit compat.
- Add missing includes to compat_ioctl.c.
- Fix 32 bit emulation of sys_settimeofday.
<schwidefsky@de.ibm.com>
[PATCH] s390: common i/o layer.
- Make ccwgroup online attribute consistent with ccw online attribute.
- Add link incident record handling to channel subsystem code.
- Do path grouping only if the device driver explicitly requests it.
- Fix multicast or broadcast flood ping hand on HiperSockets.
<schwidefsky@de.ibm.com>
[PATCH] s390: dasd driver.
- Simplify long busy condition handling, add quiesce/resume ioctl.
- Add sense data area to reserve/release/steal_lock ccw-chains.
<schwidefsky@de.ibm.com>
[PATCH] s390: set module owner.
Pass correct argument to SET_MODULE_OWNER.
<schwidefsky@de.ibm.com>
[PATCH] s390: typos.
Fix typos.
<schwidefsky@de.ibm.com>
[PATCH] s390: tty3215_init.
Add return statement to tty init function of 3215 driver.
<willy@debian.org>
[PATCH] [KCONFIG] Make cdrom Kconfig selfcontained
This patch moves all the duplicated cdrom Kconfig bits from arch/*/Kconfig
to drivers/cdrom/Kconfig
<rth@kanga.twiddle.net>
[ALPHA] Define memset via symbol copy for ev6 as well.
<greg@kroah.com>
Cset exclude: cweidema@indiana.edu|ChangeSet|20030621162021|08529
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: TCQ initialization fixes
- do not enable TCQ in ide_init_drive(), its too early
- enable TCQ in __ide_dma_on() only if CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
- try to enable TCQ only on disk drives
- correct check for two drives on one channel
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: fix IRQ handler returns
Make the IDE driver return the proper status return
for unhandled interrupts.
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: fix drive->unmask handling for taskfile PIO
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: proper allocation of hwif->io_ports resources
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: tiny cleanup of "ideX=ata66" parameter handling in ide_setup()
hwif->udma_four is always preset to 0
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: remove dead code from ide_raw_build_sglist()
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: remove dead and broken ide_diag_taskfile() variant
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] ide: tiny cleanup of ide_init(), it is called only _once_
<rth@kanga.twiddle.net>
[ALPHA] No, really fix memset. Really.
<daniel.ritz@gmx.ch>
[PATCH] module ref counting for airo.c
clean up airo.c: remove MOD_(INC|DEC)_USE_COUNT, set the owner field instead.
compile tested only. against 2.5.73-bk
<daniel.ritz@gmx.ch>
[PATCH] strip.c: don't allocate net_device as part of private struct
hi jeff
cleans up strip.c not to allocate struct net_device as part of the private
structure. use a separate kmalloc (and kfree). compile tested only.
against 2.5.73-bk
-daniel
<daniel.ritz@gmx.ch>
[PATCH] alloc_etherdev for netwave_cs.c
erm...i didn't actually compile it...
sorry. corrected patch below.
-daniel
On Fri June 27 2003 00:45, Daniel Ritz wrote:
> cleans up netwave_cs.c to use alloc_etherdev instead of allocating the
> device out of the private data structure. compile tested only.
> against 2.5.73-bk
<gandalf@wlug.westbo.se>
[PATCH] fix use-after-free in e100
<davem@nuts.ninka.net>
[NET]: Scale DST/ipv6 intervals like we did for ipv4.
<shemminger@osdl.org>
[NET]: Fix PPP async regression.
Fix PPP over async regression that the PPPoE changes caused.
Basically, PPP puts a zero length skbuff in the receive queue
as an error token, and the last change caused that to get flushed
as bad data.
Thanks to Diego Calleja Garcia, Matthew Harrell for validating this.
<hch@lst.de>
[PATCH] fix an aha1740 merge error
it should use scsi_host_alloc/scsi_host_put now.
<rth@kanga.twiddle.net>
[ALPHA] Set wall_to_monotonic on timer_init and settimeofday.
<rth@kanga.twiddle.net>
[ALPHA] Eliminate struct declared in prototype warnings in asm/elf.h.
<jejb@raven.il.steeleye.com>
Eliminate really old ncr53c8xx driver
- Remove direct configuration of this driver
- Only remaining use is in the parisc zalon driver
- Split the driver up to make it more use to 720 based drivers
- Update zalon to new module/SCSI methods
<da-x@gmx.net>
[PATCH] avoid Oops in net/core/dev.c
This fixes the kernel crash in the case when we do an SIOCSIFNAME
ioctl on /proc/net/dev to rename a network interface, and
we supply a string such as "foo%sbar".
<akpm@digeo.com>
[PATCH] check for presence of readpage() in the readahead code
Make sure that the address_space is capable of performing the readahead
before going in and allocating the pages.
<akpm@digeo.com>
[PATCH] Fix reiserfs BUG
From: Oleg Drokin <green@namesys.com>
Fix BUG_ON(!buffer_mapped(bh)) in submit_bh()
Reiserfs is submitting unmapped buffers into submit_bh(), which trips a
BUG.
<akpm@digeo.com>
[PATCH] Fix syslog(2) EFAULT reporting
From: Andi Kleen <ak@suse.de>
Add proper EFAULT reporting to sys_syslog.
This fixes some silly LTP test in the 32bit emulation of an AMD64 kernel.
<akpm@digeo.com>
[PATCH] Fix ide-cd rw mounts
From: Kouichi ONO <co2b@ceres.dti.ne.jp>
in 2.5.73, I can't read/write mount DVD-RAM via ide-scsi (only r/o mount).
Without ide-scsi, I can mount DVD-RAM read/write mode and works fine.
(acked by Jens).
<akpm@digeo.com>
[PATCH] Remove check_region and MOD_*_USE_COUNT from
From: Bob Miller <rem@osdl.org>
- Replace the call to MOD_INC_USE_COUNT with a __module_get() when
forcing the module to not be unloadable.
- Remove the check_region() calls and restructured things to only use
request_region().
<akpm@digeo.com>
[PATCH] Remove racy check_mem_region() call from arc-rimi.c
From: Bob Miller <rem@osdl.org>
Removed the check_mem_region() call and replaced with request_mem_region().
Because of the way the driver is structured the first request_mem_region()
call gets the default memory area. After probing the complete memory area
that is needed to communicate with the device is known, so the first memory
area is released and the complete area is requested.
<akpm@digeo.com>
[PATCH] kmem_cache_destroy() forgets to drain all objects
From: Philippe Elie <phil.el@wanadoo.fr>
kmem_cache_destroy() can fail with the following error: slab error in
kmem_cache_destroy(): cache `xxx': Can't free all objects but the cache
user really free'd all objects
This is because drain_array_locked() only frees 80% of thge objects.
Fix it by adding a parameter to drain_array_locked() telling it to drain
100% of the objects.
<akpm@digeo.com>
[PATCH] ext3: remove the version number
The ext3 version number hasn't been updated since ext3 was merged.
We track ext3 via the kernel release ID. Remove the ext3 version
number.
<akpm@digeo.com>
[PATCH] cdrom eject scribbles on the request flags
From: Nick Piggin <piggin@cyberone.com.au>
It converts writes to reads and we end up returning the request to the wrong
queue.
<akpm@digeo.com>
[PATCH] nmclan_cs compile fix
nmclan_cs doesn't compile with older compilers
<tcallawa@redhat.com>
[SPARC64]: Fix OBP version parsing on newer systems.
<davem@nuts.ninka.net>
[SPARC64]: Fix build error from OBP parsing patch.
<jejb@raven.il.steeleye.com>
Add NCR Quad 720 SCSI driver
This adds support for the Q720 MCA SCSI driver. It's only really
useful on the voyager platform. The driver is preliminary and
currently makes no use of the Q720 on-board memory for storing
scripts and ccbs.
<jejb@raven.il.steeleye.com>
Fix logic reversal in scsi_host_alloc
<yoshfuji@linux-ipv6.org>
[IPV6] Don't set M flag in last fragment.
<yoshfuji@linux-ipv6.org>
[IPV6] Use macro for M-Flag and clean-up.
Use macro IP6_MF for the M-Flag.
Clean-up for readability (commented by <aj@dungeon.inka.de>).
<yoshfuji@linux-ipv6.org>
[IPV6] Convert /proc/net/ip6_flowlabel to seq_file.
<yoshfuji@linux-ipv6.org>
[XFRM] Fix typo.
<herbert@gondor.apana.org.au>
[XFRM] Set SA saddr correctly
The source address of an SA is not necessarily equal to the source address
in the selector. This patch addresses this problem.
<herbert@gondor.apana.org.au>
[IPSEC] split xfrm_state_replace + fixes
Split xfrm_state_replace into xfrm_state_add and xfrm_state_replace.
Fixes:
1. Only update update lifetime and encap options if the state is valid.
2. Disallow updates to states that do not exist.
3. Bail if afinfo cannot be found.
This brings SADB_UPDATE in line with what is required by RFC2367.
It is also needed by SFS NAT-T support as it needs to update valid
states when the encap ports move.
I've tweaked the logic slightly so that SADB_UPDATE will fail on a
larval state that hasn't undergone SADB_GETSPI. This is what RFC2367
calls for and it simplifies the code in that we don't have to call
find_acq for SADB_UPDATE.
This doesn't affect any of the three KMs as they either don't use
SADB_UPDATE or call SADB_GETSPI before doing an update.
<bcollins@debian.org>
[PATCH] Update IEEE1394 (r986)
ETH1394 : - Minor cleanups.
- Fix incorrect error handling with no broadcast channel.
- Set max/default MTU to 1500.
- Fix broken spinlock handling on device open.
IEEE1394 : Make bus-nodeid printk's of a consistent format.
OHCI1394 : Change one printk to a verbose/debug only message.
<alan@lxorguk.ukuu.org.uk>
[NET]: Add EDP2 ethernet protocol ID.
<jejb@jet.(none)>
Fix scsi device starvation handling
Doing some debugging after the SDET failure, I found that
if we reject a command at zero depth, we can get into the
infinite loop where we refuse a command to a LUN because it
is starved, but there's no returning command to run the SCSI
queues and fix the starvation.
The solution is to accept the command and remove the LUN from
the starved list.
<Kai.Makisara@kolumbus.fi>
[PATCH] scsi_ioctl_send_command fix
The SCSI_IOCTL_SEND_COMMAND ioctl does not work in 2.5.73-bk7. The
following patch (possibly mangled by my mail client) does fix the problem
(introduced in 2.5.73):
<yoshfuji@linux-ipv6.org>
[IPV6] put ipv6_rcv_saddr_equal() common place
<yoshfuji@linux-ipv6.org>
[NET] fixed /proc/net/raw{,6} seq_file support
<yoshfuji@linux-ipv6.org>
[IPV6] Fix bug in /proc/net/ip6_flowlabel seq_file conversion
<ink@jurassic.park.msu.ru>
[ALPHA] Set HAE-4 for SABLE/LYNX
From Jay Estabrook:
> Here's a real short one that fixes a GENERIC build problem introduced
> in pre2, and finalizes the SABLE/LYNX support setting of HAE-4, making
> X servers finally work on those platforms.
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Move "owner" field to pcmcia_socket.
Move ->owner field from socket operations to pcmcia_socket. (This
change is mainly for the SA11xx drivers, which use a core driver
for the chip, and a separate module for all the machine specific
bits.)
<anton@samba.org>
ppc64: any_online_cpu returns NR_CPUS on fail
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: unusual_devs.h cleanups
This patch re-sorts unusual_devs.h and removes some duplicate entries.
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: create associate_dev(), more US_*_DEVICE printout
This patch creates an associate_dev(), which is the mirror to
disassociate_dev(). It also adds some more printout when identifiying
devices that qualify for US_*_DEVICE codes so we need less interaction with
the reporting user.
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: avoid sending URBs when disconnecting
This patch avoids sending URBs which are part of the reset system when the
device is being disconnected. It also makes the control thread avoid
starting anything for a device in that state.
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: create private I/O buffer
This patch creates a private I/O buffer for the 'core' subdrivers. This
allows us to fix all cases of DMAing to/from the stacks, statics, or other
bad places.
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: Cosmetic cleanups
This is some cosmetic cleanups. Things like changing dr to cr (they used
to stand for usb_devrequest, which is now usb_ctrlrequest), using strlcpy
instead of strncpy, and modifying some comments.
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: General purpose I/O buffer allocation and management
This patch makes our private I/O buffer allocated such that it's pre-mapped
for DMA. We then add some logic to make sure that we don't try to re-map
it.
We also make the size of the buffer large enough for other sub-drivers,
which will be converted shortly.
<mdharm-usb@one-eyed-alien.net>
[PATCH] USB storage: logic cleanup
This patch cleans up the logic involved in setting URB flags a bit so it's
more evident that some flags are always set and other flags are only set
under certain conditons.
<grigouze@noos.fr>
[PATCH] USB: zaurus SL-C700
This is a patch for usbnet for working with Zaurus SL-C700.
The productid is different from other Zaurus, so i add an entry for it :)
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Ref-count the socket driver module on card insertion/removal.
Get/Put module when we insert and remove a card. This avoids a
potential deadlock when socket drivers are unloaded, and we have
a cardbus card known to the system.
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Remove original module use accounting in register_callback.
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Add work-around for bouncy card detect signals.
Add work-around for i82365-based socket drivers to the core PCMCIA
code. Since insert processing is not a time critical event, we can
afford to delay (by sleeping) these for everyone.
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Allow socket drivers call pcmcia_parse_events directly.
Remove register_callback methods. Instead, allow socket drivers
pass their events directly into cs.c via pcmcia_parse_events().
<rmk@flint.arm.linux.org.uk>
[PCMCIA] Remove now obsolete work queues, spinlocks and variables.
Since the cs.c pcmcia core has a per-socket thread, we don't need each
socket driver having a work queue and associated complexity.
Therefore, remove this complexity and allow the socket drivers to call
pcmcia_parse_events directly from their interrupt or timer handlers.
<rth@kanga.twiddle.net>
[ALPHA] Fix SETTLS -- read TLS value to install before clobbering it.
<greg@kroah.com>
[PATCH] USB: turn down some debugging messages in uhci-hcd.
<James.Bottomley@SteelEye.com>
[PATCH] move sg_dma_ macros out of asm-i386/pci.h
These macros belong in asm-i386/scatterlist.h instead.
As the headers are disentangled this has shown up as a problem with my
MCA SCSI drivers since they no-longer include asm/pci.h in any form but
need to traverse the scatterlist.
<James.Bottomley@SteelEye.com>
[PATCH] update show_stack() in voyager for new prototype
When show_stack() was changed to take two arguments, the use in the
voyager code was not converted. This patch makes the correct
conversion.
<spse@secret.org.uk>
[PATCH] pcmciamtd update
Resync with CVS. Minor update including better handling of device removal.
<gerg@snapgear.com>
[PATCH] conditional ROMfs copy for Motorola M5282EVB board
Make the ROMfs copy in the startup code for Motorola M5282EVB board
conditional on actually using a ROMfs setup.
<gerg@snapgear.com>
[PATCH] fix compile warnings ColdFire PIT timer
Include interrupt.h in the Motorola ColdFire PIT timer code.
Cleans up compiler warning.
<gerg@snapgear.com>
[PATCH] selection of boot parameters at configure time for Motorola 5307 targets
Allow selection of boot arguments at configure time for the Motorola
ColdFire 5307 targets.
<anton@samba.org>
[PATCH] fix return value after hugetlb mmap failure
At the moment no one uses is_aligned_hugepage_range or is_hugepage_only_range,
but it is reasonable to assume they return true or false.
On error we want to return -EINVAL back to userspace.
<latten@austin.ibm.com>
[IPV6] Make ipsec tunnel work with ext hdrs
I noticed that using extensions headers along with IPsecv6 tunnel mode did
not work in 2.5.73 + patch-2.5.73-bk3. The following patch
checks "nexthdr" instead of "iph->nexthdr" which could be an
extension header. I tested this with tunnel mode and transport mode
with and without extension headers and it worked ok.
<torvalds@home.osdl.org>
Fix the code that checks for PCI IDE controller "native" vs "legacy"
modes.
It used to think that IDE controllers that weren't marked as "IDE storage"
PCI class (eg CMD IDE RAID controllers mark themselves as "RAID storage")
were always using legacy mode interrupt routing, which is bogus. In fact,
the whole native vs legacy thing only makes sense for the IDE storage class,
so fix the test to match.
<shemminger@osdl.org>
[BRIDGE]: Ethernet bridge fixes.
1. STP protocol has no security, so malcontents can fuck with the
bridge's topology. The fixes are to ship with STP turned off
to protect the ignorant, and run STP packets through ebtables
netfilter for the smart.
Got this one via a russian hacker "Oleg K. Artemjev" <olli@rbauto.ru>
before he published the paper.
Bridge netfilter still needs work to give a nice face on this
but this patch gives the hooks to filter.
2. STP input processing was lax in it's length checking so I bet
you could make up a bomb packet.
My inspection while doing #1.
3. Forwarding table could be abused by sending forged packets with
bogus source address same as the local host. This came via
Lennart from Jerry Kreuscher <jerrykr@mindspring.com> who ran into
it by mistake.
<yoshfuji@linux-ipv6.org>
[NET] convert /proc/net/igmp to seq_file
<yoshfuji@linux-ipv6.org>
[NET] convert /proc/net/igmp6 to seq_file
<yoshfuji@linux-ipv6.org>
[NET] convert /proc/net/mcfilter to seq_file
<yoshfuji@linux-ipv6.org>
[NET] convert /proc/net/mfilter6 to seq_file
<yoshfuji@linux-ipv6.org>
[NET] convert /proc/net/anycast6 to seq_file
<davem@nuts.ninka.net>
[IPV6]: Fix two ipv6_addr_addr failure checks.
<yoshfuji@linux-ipv6.org>
[IPV6]: One too many ipv6_addr_type() calls in ndisc_recv_ns().
<gerg@snapgear.com>
[PATCH] conditional ROMfs copy for Arnewsh 5307 board
Make the ROMfs copy in the startup code for ARNEWSH 5307 board
conditional on actually using a ROMfs setup.
<gerg@snapgear.com>
[PATCH] rework 68360 interrupt handling code
Rework the interrupt handling code for the m68knommu 68360 sub-architecture.
This is inline with the interrupt changes to the other m68knommu CPU's.
Makes this code be the primary interrupt setup for a 68360 based kernel,
not just a set of support functions.
<gerg@snapgear.com>
[PATCH] clean up m68knommu bitops.h
Rework the bitops functions for the m68knommu arhcitecture. Change
all addr pointers to be "unsigned long", cleans up many compiler
warnings.
<gerg@snapgear.com>
[PATCH] fix ColdFire 5249 dma support
The m68knommu ColdFire 5249 CPU has the same DMA engine as the 5307
and 5407 ColdFire CPU's. Modify m68knommu dma.h to reflect this.
<gerg@snapgear.com>
[PATCH] fix broken MARK parity define for ColdFire UART
Fix broken definition of MARK parity for ColdFire UART.
<rusty@rustcorp.com.au>
[PATCH] Identify Code Section Of Modules for kallsyms
Remember the size of the SHF_EXECINSTR sections, which are conveniently
at the start of the modules, and use that to more reliably implement
module_text_address().
<rusty@rustcorp.com.au>
[PATCH] Make runqueues a per-cpu variable
Makes scheduler use per-cpu variables for the runqueues.
<axboe@suse.de>
[PATCH] ide-cd: capability flag for MO drives
From: Pascal Schmidt <der.eremit@email.de>
Add capability flag for MO drives. Since ATAPI MOs are now recognized
by the ide-cd driver, it is useful to have a capability flag to be able
to tell MO drives from other drives (needed for later write support).
<ak@suse.de>
[PATCH] x86-64 merge for 2.5.73-bk9
- Update defconfig
- Merge with i386
- Make oprofile compile again
- Warning fixes
- Minor changes for 32bit SYSCALL path (still disabled)
- Remove obsolete FS/GS symbols in ptrace.h
<mzyngier@freesurf.fr>
[netdrvr de2104x] quiet link timer
(can be enabled by ethtool)
<greg@kroah.com>
[PATCH] USB: make struct usb_bus a struct class_device
This creates sys/class/usb_host/ which lists all usb hosts in the system.
<greg@kroah.com>
[PATCH] USB: move ehci's sysfs files to the class device instead of the pci device.
<greg@kroah.com>
[PATCH] USB: move ohci's sysfs files to the class device instead of the pci device.
<lkml001@vrfy.org>
[PATCH] USB: usb-skeleton.c usb_buffer_free() not called
dev->udev was set to NULL to indicate a device disconnect but we need
this value for usb_buffer_free() when device is still opened and cleanup is
delayed until skel_release().
I've added a dev->present for preventing device read, write and ioctl.
Also URB_NO_DMA_MAP is changed to URB_NO_TRANSFER_DMA_MAP and a unused
var is removed.
<stern@rowland.harvard.edu>
[PATCH] USB: Reconcile unusual_devs.h in 2.4 and 2.5
This patch for 2.5 copies into unusual_devs.h an entry that is present in
2.4 but missing here. It also adds back the IGNORE_SER flag with a dummy
value, just for backward compatibility.
<schwidefsky@de.ibm.com>
[PATCH] s390: semtimedop.
Fix SEMTIMEDOP operation in sys_ipc. Patch by Ernie Petrides.
<schwidefsky@de.ibm.com>
[PATCH] s390: ptrace.
Fix ptrace system call number replacement code.
<schwidefsky@de.ibm.com>
[PATCH] s390: online attribute.
Fix online attribute. "echo 1 > online" should enable a device and
"echo 0 > online" should disable a device, not the other way round.
<schwidefsky@de.ibm.com>
[PATCH] s390: processor type.
Add configuration option to select the different processor types. Add new
path group algorith and new relocation types introduces with z990.
<schwidefsky@de.ibm.com>
[PATCH] s390: thin interrupts.
Add thin interrupt support to qdio.
<schwidefsky@de.ibm.com>
[PATCH] s390: qeth network driver.
The qeth network device driver. Supports the OSA Express Gigabit cards,
HiperSockes and VM GuestLAN interfaces.
<bcollins@debian.org>
[PATCH] Spelling fix
Spelling fix
<bcollins@debian.org>
[PATCH] Use KALLSYMS for scripts/kallsyms
Since KALLSYMS is defined, might aswell use it somewhere.
<ak@suse.de>
[PATCH] Fix IPC ABI for AMD64
AMD64 like IA64 needs to force IPC_64 in the IPC functions. This makes
2.5 compatible with 2.4 again.
<ak@suse.de>
[PATCH] Disable a.out for AMD64
AMD64 does not support a.out, so don't display it in the configuration.
<B.Zolnierkiewicz@elka.pw.edu.pl>
[PATCH] Mark taskfile EXPERIMENTAL again
Okay, since now corruption happens and there are some other issues to be
resolved ("bad: scheduling while atomic" and "/proc/ide/hdX/identify")
better set it by default to n for 2.5.74, also mark it EXPERIMENTAL.
<lethal@linux-sh.org>
[PATCH] SH Merge
This includes the remainder of arch-specific part of the SH merge.
This patch only effects arch/sh and include/asm-sh, against current BK.
<thornber@sistina.com>
[PATCH] dm: fix memory leak
<thornber@sistina.com>
[PATCH] dm: remove bogus yields
Replace a couple of bogus yields() with schedule() and io_schedule()
respectively.
<torvalds@home.osdl.org>
Linux 2.5.74