ChangeSet 1.1143.1.4, 2003/03/18 14:37:45-08:00, greg@kroah.com
[PATCH] i2c i2c-i801.c: fix up formatting and whitespace issues.
Also made everything static, no global functions are needed here.
drivers/i2c/busses/i2c-i801.c | 177 ++++++++++++++++++------------------------
1 files changed, 77 insertions(+), 100 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
--- a/drivers/i2c/busses/i2c-i801.c Thu Mar 20 12:57:16 2003
+++ b/drivers/i2c/busses/i2c-i801.c Thu Mar 20 12:57:16 2003
@@ -49,50 +49,48 @@
#include <linux/i2c.h>
#include <asm/io.h>
-MODULE_LICENSE("GPL");
-
#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC
#define HAVE_PEC
#endif
/* I801 SMBus address offsets */
-#define SMBHSTSTS (0 + i801_smba)
-#define SMBHSTCNT (2 + i801_smba)
-#define SMBHSTCMD (3 + i801_smba)
-#define SMBHSTADD (4 + i801_smba)
-#define SMBHSTDAT0 (5 + i801_smba)
-#define SMBHSTDAT1 (6 + i801_smba)
-#define SMBBLKDAT (7 + i801_smba)
-#define SMBPEC (8 + i801_smba) /* ICH4 only */
-#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */
-#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
+#define SMBHSTSTS (0 + i801_smba)
+#define SMBHSTCNT (2 + i801_smba)
+#define SMBHSTCMD (3 + i801_smba)
+#define SMBHSTADD (4 + i801_smba)
+#define SMBHSTDAT0 (5 + i801_smba)
+#define SMBHSTDAT1 (6 + i801_smba)
+#define SMBBLKDAT (7 + i801_smba)
+#define SMBPEC (8 + i801_smba) /* ICH4 only */
+#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */
+#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
/* PCI Address Constants */
-#define SMBBA 0x020
-#define SMBHSTCFG 0x040
-#define SMBREV 0x008
+#define SMBBA 0x020
+#define SMBHSTCFG 0x040
+#define SMBREV 0x008
/* Host configuration bits for SMBHSTCFG */
-#define SMBHSTCFG_HST_EN 1
-#define SMBHSTCFG_SMB_SMI_EN 2
-#define SMBHSTCFG_I2C_EN 4
+#define SMBHSTCFG_HST_EN 1
+#define SMBHSTCFG_SMB_SMI_EN 2
+#define SMBHSTCFG_I2C_EN 4
/* Other settings */
-#define MAX_TIMEOUT 100
-#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
+#define MAX_TIMEOUT 100
+#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
/* I801 command constants */
-#define I801_QUICK 0x00
-#define I801_BYTE 0x04
-#define I801_BYTE_DATA 0x08
-#define I801_WORD_DATA 0x0C
-#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */
-#define I801_BLOCK_DATA 0x14
-#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */
-#define I801_BLOCK_LAST 0x34
-#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */
-#define I801_START 0x40
-#define I801_PEC_EN 0x80 /* ICH4 only */
+#define I801_QUICK 0x00
+#define I801_BYTE 0x04
+#define I801_BYTE_DATA 0x08
+#define I801_WORD_DATA 0x0C
+#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */
+#define I801_BLOCK_DATA 0x14
+#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */
+#define I801_BLOCK_LAST 0x34
+#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */
+#define I801_START 0x40
+#define I801_PEC_EN 0x80 /* ICH4 only */
/* insmod parameters */
@@ -104,10 +102,6 @@
"Forcibly enable the I801 at the given address. "
"EXTREMELY DANGEROUS!");
-
-
-
-
static void i801_do_pause(unsigned int amount);
static int i801_transaction(void);
static int i801_block_transaction(union i2c_smbus_data *data,
@@ -132,7 +126,7 @@
else
isich4 = 0;
-/* Determine the address of the SMBus areas */
+ /* Determine the address of the SMBus areas */
if (force_addr) {
i801_smba = force_addr & 0xfff0;
} else {
@@ -155,8 +149,9 @@
pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
-/* If force_addr is set, we program the new address here. Just to make
- sure, we disable the device first. */
+
+ /* If force_addr is set, we program the new address here. Just to make
+ sure, we disable the device first. */
if (force_addr) {
pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe);
pci_write_config_word(I801_dev, SMBBA, i801_smba);
@@ -177,18 +172,18 @@
dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
- END:
+END:
return error_return;
}
-void i801_do_pause(unsigned int amount)
+static void i801_do_pause(unsigned int amount)
{
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(amount);
}
-int i801_transaction(void)
+static int i801_transaction(void)
{
int temp;
int result = 0;
@@ -259,28 +254,28 @@
}
/* All-inclusive block transaction function */
-int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command)
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command)
{
int i, len;
int smbcmd;
int temp;
int result = 0;
int timeout;
- unsigned char hostc, errmask;
+ unsigned char hostc, errmask;
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
- hostc | SMBHSTCFG_I2C_EN);
- } else {
- dev_err(&I801_dev->dev,
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(I801_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else {
+ dev_err(&I801_dev->dev,
"I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
- return -1;
- }
- }
+ return -1;
+ }
+ }
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
@@ -303,10 +298,6 @@
smbcmd = I801_BLOCK_LAST;
else
smbcmd = I801_BLOCK_DATA;
-#if 0 /* now using HW PEC */
- if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC)
- smbcmd |= I801_PEC_EN;
-#endif
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
@@ -316,15 +307,15 @@
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
- if (i == 1) {
- /* Erronenous conditions before transaction:
- * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- errmask=0x9f;
- } else {
- /* Erronenous conditions during transaction:
- * Failed, Bus_Err, Dev_Err, Intr */
- errmask=0x1e;
- }
+ if (i == 1) {
+ /* Erronenous conditions before transaction:
+ * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
+ errmask=0x9f;
+ } else {
+ /* Erronenous conditions during transaction:
+ * Failed, Bus_Err, Dev_Err, Intr */
+ errmask=0x1e;
+ }
if (temp & errmask) {
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
"Resetting... \n", temp);
@@ -336,20 +327,14 @@
goto END;
}
if (i != 1) {
- result = -1; /* if die in middle of block transaction, fail */
- goto END;
- }
+ /* if die in middle of block transaction, fail */
+ result = -1;
+ goto END;
+ }
}
- if (i == 1) {
-#if 0 /* #ifdef HAVE_PEC (now using HW PEC) */
- if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
- if(read_write == I2C_SMBUS_WRITE)
- outb_p(data->block[len + 1], SMBPEC);
- }
-#endif
+ if (i == 1)
outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
- }
/* We will always wait for a fraction of a second! */
timeout = 0;
@@ -387,7 +372,7 @@
data->block[0] = len;
}
- /* Retrieve/store value in SMBBLKDAT */
+ /* Retrieve/store value in SMBBLKDAT */
if (read_write == I2C_SMBUS_READ)
data->block[i] = inb_p(SMBBLKDAT);
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
@@ -422,27 +407,22 @@
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
}
-#if 0 /* now using HW PEC */
- if(read_write == I2C_SMBUS_READ) {
- data->block[len + 1] = inb_p(SMBPEC);
- }
-#endif
outb_p(temp, SMBHSTSTS);
}
#endif
- result = 0;
+ result = 0;
END:
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- /* restore saved configuration register value */
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ /* restore saved configuration register value */
pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
- }
+ }
return result;
}
/* Return -1 on error. */
-s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
- union i2c_smbus_data * data)
+static s32 i801_access(struct i2c_adapter * adap, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data * data)
{
int hwpec = 0;
int block = 0;
@@ -544,7 +524,7 @@
}
-u32 i801_func(struct i2c_adapter *adapter)
+static u32 i801_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
@@ -571,8 +551,6 @@
.algo = &smbus_algorithm,
};
-
-
static struct pci_device_id i801_ids[] __devinitdata = {
{
.vendor = PCI_VENDOR_ID_INTEL,
@@ -642,18 +620,17 @@
return pci_module_init(&i801_driver);
}
-
static void __exit i2c_i801_exit(void)
{
pci_unregister_driver(&i801_driver);
release_region(i801_smba, (isich4 ? 16 : 8));
}
-
-
-MODULE_AUTHOR
- ("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
module_init(i2c_i801_init);
module_exit(i2c_i801_exit);