gconf (3.2.5-1+build1+dyson3) unstable; urgency=low
* Depend on procutils on illumos
* Use pkill in postinst
-- Igor Pashev <pashev.igor@gmail.com> Sat, 08 Jun 2013 14:05:04 +0400
gconf (3.2.5-1+build1+dyson2) unstable; urgency=low
* psmisc is not use, do not depend on it.
-- Igor Pashev <pashev.igor@gmail.com> Fri, 01 Feb 2013 06:48:13 +0000
gconf (3.2.5-1+build1+dyson1) unstable; urgency=low
* Built for Dyson
-- Igor Pashev <pashev.igor@gmail.com> Fri, 01 Feb 2013 05:43:03 +0000
gconf (3.2.5-1+build1) unstable; urgency=low
* No source changes; rebuild with xz compression.
-- Michael Biebl <biebl@debian.org> Tue, 07 Aug 2012 14:14:52 +0200
gconf (3.2.5-1) unstable; urgency=low
* New upstream release.
* Bump Build-Depends on cdbs and debhelper for multiarch support.
* Bump Build-Depends on libglib2.0-dev to (>= 2.31.0).
* Drop explicit Build-Depends on gir1.2-glib-2.0.
* Refresh patches.
* Bump Standards-Version to 3.9.3.
-- Michael Biebl <biebl@debian.org> Sat, 28 Apr 2012 01:17:36 +0200
gconf (3.2.3-4) unstable; urgency=medium
* Let libgconf2-4 and libgconf-2-4 break gconf2 << 3.2.3-2 to avoid
triggering gconf2 while in an inconsistent state. Thanks a lot to
Steve Langasek for the analysis. Closes: #663167.
-- Josselin Mouette <joss@debian.org> Sat, 17 Mar 2012 17:23:46 +0100
gconf (3.2.3-3) unstable; urgency=medium
* Let gconf2-common Breaks: libgconf2-4 (<< 3.2.3-2), to avoid partial
upgrades (closes: #661380).
-- Jordi Mallach <jordi@debian.org> Sun, 26 Feb 2012 22:26:14 +0100
gconf (3.2.3-2) unstable; urgency=low
[ Michael Biebl ]
* debian/libgconf2-dev.install:
- Remove libtool .la files.
* debian/control.in:
- Remove obsolete Conflicts and Replaces.
- Change section of gir1.2-gconf-2.0 to introspection.
* Rely on cdbs to call dh_girepository. Bump Build-Depends accordingly.
* Switch to dh_python2.
[ Laurent Bigonville ]
* Add debian/patches/05_readd_gconf_engine_key_is_writable.patch: Add
missing function in D-Bus variant that causes ABI breakage (Closes: #649112)
[ Jordi Mallach ]
* Add a NEWS entry explaining the necessity of a session restart after
a GConf 2.32 → GConf 3.2 upgrade, due to the ORBit → D-Bus
transition (closes: #648673).
[ Josselin Mouette ]
* Convert to Multi-Arch. Closes: #652861.
+ gconf2, gconf2-common, gconf-defaults-service are M-A: foreign.
+ Move the daemon to a multiarch path.
+ Tighten dependencies.
+ Remove the sanity-check binary, nothing uses it anymore.
Closes: #649297, #645580.
+ Move the daemon and the activation file to gconf-service, a new
MA: foreign package.
+ Add appropriate Breaks/Replaces for the activation file.
+ Rename libgconf2-4 to libgconf-2-4, make it MA: same.
+ Make the shlibs add both libgconf-2-4 and gconf-service.
+ Make libgconf2-4 a dummy MA: same package depending on both too.
+ gconf-gsettings-backend is MA: same.
+ Move dbus dependency to gconf-service, make it dbus-x11.
* Move the API documentation to libgconf2-doc.
* Get rid of the symlink for documentation.
* Remove unused gnome-version.mk.
* gconf-schemas, update-gconf-defaults: don’t purge the environment
entirely. Closes: #636083.
-- Josselin Mouette <joss@debian.org> Thu, 23 Feb 2012 21:56:45 +0100
gconf (3.2.3-1) unstable; urgency=low
[ Jeremy Bicha ]
* New upstream release
* debian/control.in:
- Use GTK 3
- Drop orbit dependency
- Updated Vcs-Browser link
* debian/copyright: Fixed lintian warning
* debian/rules:
- Explicity disable orbit
* debian/watch: Switch to .xz tarballs
* 02_fix_wrong_return_value.patch: Updated
[ Josselin Mouette ]
* Split the GSettings backend into a gconf-gsettings-backend package
that provides gsettings-backend. Closes: #633442.
* New upstream release.
-- Josselin Mouette <joss@debian.org> Sat, 12 Nov 2011 14:17:51 +0100
gconf (2.32.4-1) unstable; urgency=low
* New upstream release.
-- Michael Biebl <biebl@debian.org> Thu, 16 Jun 2011 17:45:14 +0200
gconf (2.32.3-2) unstable; urgency=low
* debian/watch: Switch to .bz2 tarballs.
* Bump debhelper compatibility level to 8.
- Bump Build-Depends on debhelper.
- Strip leading debian/tmp/ from .install files.
* Bump Standards-Version to 3.9.2. No further changes.
* Update package description. Fix spelling error "allows to" found by
lintian.
* Drop Build-Depends on dpkg-dev (>= 1.13.19). Even lenny has a more recent
version.
* Upload to unstable, drop check-dist include.
-- Michael Biebl <biebl@debian.org> Fri, 03 Jun 2011 22:08:15 +0200
gconf (2.32.3-1) experimental; urgency=low
[ Josselin Mouette ]
* Make the -dev package depend on the gir package.
[ Sebastien Bacher ]
* New upstream version
* debian/control.in: updated Standards-Version
* debian/patches/01_defaults_path.patch: new version update
-- Sebastien Bacher <seb128@ubuntu.com> Wed, 18 May 2011 13:23:03 +0200
gconf (2.32.1-2) experimental; urgency=low
* debian/po-up/*:
+ Removed, the patch has been merged upstream so there's nothing
to translate.
* debian/rules:
+ Remove patch-translations.mk.
* Update to the new gir policy:
- Rename gir1.0-gconf-2.0 to gir1.2-gconf-2.0.
- Bump the gobject-introspection build dependency.
- Build depend on gir1.2 packages.
-- Emilio Pozuelo Monfort <pochu@debian.org> Sun, 12 Dec 2010 15:59:47 +0100
gconf (2.32.1-1) experimental; urgency=low
[ Josselin Mouette ]
* Include patch-translations.mk, bump build-depends accordingly.
* Include 03_error_message.patch in POTFILES.in.
* pt_BR.po: Brazilian Portuguese translation. Closes: #599032.
* fr.po: French translation by Christian Perrier. Closes: #599049.
* da.po: Danish translation by Joe Hansen. Closes: #599125.
* cs.po: Czech translation by Michal Simunek. Closes: #599198.
* update-gconf-defaults: patch from Ubuntu to deal with broken
symlinks. Closes: #599393. Thanks Michael Vogt.
* de.po: German translation by Helge Kreutzmann. Closes: #599683.
* sv.po: Swedish translation by Martin Bagge. Closes: #599854.
* 04_manpage.patch: patch from A. Costa. Fixes typos in the manual
page. Closes: #600899.
[ Sjoerd Simons ]
* New upstream release
* Bump gobject-introspection to the lastest version to generate the most
recent .gir version
* debian/patches/03_error_message.patch
+ Removed, merged upstream
* debian/rules:
+ Specify compilation with gtk2
[ Emilio Pozuelo Monfort ]
* Switch to source format 3.0 (quilt).
* debian/patches/*:
- Updated to apply cleanly.
-- Emilio Pozuelo Monfort <pochu@debian.org> Mon, 06 Dec 2010 00:53:14 +0100
gconf (2.31.5-1) experimental; urgency=low
[ Josselin Mouette ]
* Patch from Ubuntu - thanks to Sébastien Bacher. Closes: #587786.
* debian/control.in:
- list a new gir1.0-gconf-2.0 binary
- libgconf2-dev replaces gir-repository-dev
* debian/gir1.0-gconf-2.0.install,
debian/libgconf2-dev.install:
- install the gir and typelib
* debian/rules:
- use dh_girepository
* Fix description for the GIR package.
[ Sjoerd Simons ]
* New upstream release
-- Sjoerd Simons <sjoerd@debian.org> Sat, 03 Jul 2010 15:36:20 +0100
gconf (2.31.4-1) experimental; urgency=low
[ Josselin Mouette ]
* 03_error_message.patch: new patch. Replace the error message by
something more accurate nowadays. Closes: #582839.
[ Sebastian Dröge ]
* New upstream development release:
+ debian/control.in:
- Update GLib build dependency to >= 2.25.9.
-- Sebastian Dröge <slomo@debian.org> Sat, 19 Jun 2010 08:07:51 +0200
gconf (2.31.3-1) experimental; urgency=low
* New upstream development release:
+ debian/gconf2.install:
- Add autostart file for GSettings.
-- Sebastian Dröge <slomo@debian.org> Tue, 25 May 2010 11:56:39 +0200
gconf (2.31.2-1) experimental; urgency=low
* New upstream development release.
-- Sebastian Dröge <slomo@debian.org> Fri, 23 Apr 2010 12:59:31 +0200
gconf (2.31.1-1) experimental; urgency=low
* New upstream development release:
+ debian/control.in:
- Update build-dependencies and dependencies.
+ debian/libgconf2.install:
- Add GSettings backend module.
+ debian/rules:
- Update shlibs version to >= 2.31.1 because of new API.
-- Sebastian Dröge <slomo@debian.org> Wed, 21 Apr 2010 09:04:14 +0200
gconf (2.28.1-6) unstable; urgency=low
* de.po: German translation by Helge Kreutzmann. Closes: #599683.
* sv.po: Swedish translation by Martin Bagge. Closes: #599854.
* 04_manpage.patch: patch from A. Costa. Fixes typos in the manual
page. Closes: #600899.
-- Josselin Mouette <joss@debian.org> Sat, 06 Nov 2010 20:40:24 +0100
gconf (2.28.1-5) unstable; urgency=low
* Include patch-translations.mk, bump build-depends accordingly.
* Include 03_error_message.patch in POTFILES.in.
* pt_BR.po: Brazilian Portuguese translation. Closes: #599032.
* fr.po: French translation by Christian Perrier. Closes: #599049.
* da.po: Danish translation by Joe Hansen. Closes: #599125.
* cs.po: Czech translation by Michal Simunek. Closes: #599198.
* update-gconf-defaults: patch from Ubuntu to deal with broken
symlinks. Closes: #599393. Thanks Michael Vogt.
-- Josselin Mouette <joss@debian.org> Sat, 09 Oct 2010 09:59:07 +0200
gconf (2.28.1-4) unstable; urgency=low
* 03_error_message.patch: new patch. Replace the error message by
something more accurate nowadays. Closes: #582839.
-- Josselin Mouette <joss@debian.org> Sat, 18 Sep 2010 13:48:11 +0200
gconf (2.28.1-3) unstable; urgency=low
* gconf-schemas: don’t error out if there are no schemas to install.
Closes: #577142.
-- Josselin Mouette <joss@debian.org> Sat, 10 Apr 2010 09:55:19 +0200
gconf (2.28.1-2) unstable; urgency=low
* So, it seems that parsing XML is so slow that regenerating the
database entirely is faster than unregistering a schema and
registering it again. Which means moving to triggers is a big
performance improvement.
* update-gconf-defaults, gconf-schemas: do nothing when called from
dpkg, except from gconf2.postinst itself.
* gconf2.triggers: register the /usr/share/gconf/* directories.
* gconf2.postinst: regenerate the databases depending on the triggers
called.
* gconf2-common.dirs: ship an empty /usr/share/gconf/schemas, just in
case.
-- Josselin Mouette <joss@debian.org> Fri, 09 Apr 2010 19:35:08 +0200
gconf (2.28.1-1) unstable; urgency=low
[ David Weinehall ]
* New upstream release.
+ debian/patches/01_defaults_path.patch,
02_fix_wrong_return_value.patch,
25_gconf-path-max-hurd.patch:
- Refreshed.
* debian/control.in:
- Bump Standards version to 3.8.4 (No changes needed).
[ Loïc Minier ]
* debian/gconf2-common.install: install evoldap.schema directly in
/usr/share/doc; this makes it easier to build a non-LDAP version of GConf.
-- David Weinehall <tao@debian.org> Tue, 30 Mar 2010 18:55:51 +0300
gconf (2.28.0-1) unstable; urgency=low
[ Loïc Minier ]
* gconf2.postinst: don't test for install as this isn't used for postinsts;
use lt instead of lt-nl as a replacement; thanks Martin Pitt.
[ Emilio Pozuelo Monfort ]
* debian/patches/70_relibtoolize.patch:
- Removed, not needed anymore since upstream uses a recent libtool.
[ Luca Bruno ]
* New upstream release.
* debian/control.in:
- Update Standards-Version to 3.8.3, no additional changes needed.
- Remove libpolkit-dbus-dev and add libpolkit-gobject-1-dev
build-depends.
- Remove policykit from Build-Depends and from gconf-defaults-service.
Closes: #549518.
- Add misc:Depends to libgconf2-4, gconf2, libgconf2-dev and
gconf-defaults-service.
- Add Vcs-* fields.
* debian/gconf-defaults-service.install:
- Share dir changed from PolicyKit to polkit-1.
* debian/patches/01_defaults_path.patch:
- Update to apply cleanly.
[ Josselin Mouette ]
* Bump shlibs to version 2.27.0.
* Break gconf-editor < 2.28 because of the switch to PolicyKit 1.
-- Josselin Mouette <joss@debian.org> Fri, 09 Oct 2009 20:28:32 +0200
gconf (2.26.2-3) unstable; urgency=low
* update-gconf-defaults:
+ Support comments. Closes: #535569.
+ Add --only-if-changed option, which makes the script a no-op
if no source files are more recent than the generated
configuration.
-- Josselin Mouette <joss@debian.org> Tue, 14 Jul 2009 20:57:10 +0200
gconf (2.26.2-2) unstable; urgency=low
[ Emilio Pozuelo Monfort ]
* debian/patches/02_fix_wrong_return_value.patch: Fix a bug that
causes hardware-monitor to crash. Closes: #532119.
-- Josselin Mouette <joss@debian.org> Sun, 12 Jul 2009 15:02:45 +0200
gconf (2.26.2-1) unstable; urgency=low
* New upstream release.
* Switch to quilt to manage patches; build-depend on quilt.
* 01_defaults_path.patch: new patch. Use gconf.xml.defaults for system
defaults instead of gconf.xml.system, since in Debian we don’t
pollute the original directory by applying schemas to it.
* 70_relibtoolize.patch: regenerate for the new version, without
autom4te.cache in it.
-- Josselin Mouette <joss@debian.org> Sun, 31 May 2009 01:36:44 +0200
gconf (2.26.0-1) unstable; urgency=low
[ Josselin Mouette ]
* Add libglib2.0-doc to build-depends to ensure proper xrefs.
* README.Debian: improve documentation for the file format of the
defaults directory. Closes: #519096.
[ Luca Bruno ]
* New upstream release.
* debian/control.in:
+ Update Standards-Version to 3.8.1, no additional changes needed.
+ Update Homepage to point to the new gconf homepage.
* debian/patches:
+ Update 70_relibtoolize.patch.
-- Josselin Mouette <joss@debian.org> Tue, 14 Apr 2009 20:31:48 +0200
gconf (2.24.0-7) unstable; urgency=low
* Turn the Breaks into a Conflicts, otherwise it breaks the buildds.
-- Josselin Mouette <joss@debian.org> Fri, 20 Feb 2009 11:48:19 +0100
gconf (2.24.0-6) unstable; urgency=low
* Upload to unstable.
-- Josselin Mouette <joss@debian.org> Wed, 18 Feb 2009 00:09:29 +0100
gconf (2.24.0-5) experimental; urgency=low
[ Josselin Mouette ]
* Add a Breaks against older libbonobos because gconf using dbus makes
#331000 occur much more often.
[ Loic Minier ]
* Change the postinst to explicitely install the alternative on install and
upgrades from << 2.19.1-2.
[ Josselin Mouette ]
* update-gconf-defaults: ignore more backup extensions.
Closes: #512476.
* gconf-schemas: add a --no-signal option.
* gconf2.postinst: improve the detection of cases when daemons need to
be signalled.
* Support alternate installation paths for defaults, including setting
mandatory settings. Closes: #512474, #512947.
+ update-gconf-defaults: implement the --source, --destination,
--no-signal and --mandatory options.
+ update-gconf-defaults.8: document them.
+ default.path: add /var/lib/gconf/debian.mandatory as a mandatory
source.
+ gconf2-common.dirs: add new directories.
+ gconf2.postinst: run update-gconf-defaults --mandatory if needed.
+ gconf2.install: install the script to /usr/bin.
+ README.Debian: document this.
-- Josselin Mouette <joss@debian.org> Mon, 02 Feb 2009 14:14:55 +0100
gconf (2.24.0-4) experimental; urgency=low
* The “let’s pass through NEW†release.
* 70_relibtoolize.patch: relibtoolize the package to avoid the rpath
issue on amd64.
* copyright: include list of copyright holders.
-- Josselin Mouette <joss@debian.org> Thu, 13 Nov 2008 08:41:07 +0100
gconf (2.24.0-3) experimental; urgency=low
* Split the defaults service in a separate package,
gconf-defaults-service. Only this one depends on PolicyKit.
-- Josselin Mouette <joss@debian.org> Wed, 12 Nov 2008 21:50:50 +0100
gconf (2.24.0-2) experimental; urgency=low
* Bump shlibs version to 2.23.2.
-- Josselin Mouette <joss@debian.org> Tue, 11 Nov 2008 10:44:49 +0100
gconf (2.24.0-1) experimental; urgency=low
[ Loic Minier ]
* Replace homepage pseudo-field in description with a real source field in
control.
[ Josselin Mouette ]
* New upstream release.
+ Uses dbus session bus instead of a lockfile in /tmp.
Finally closes: #404743.
+ Remove 01_no_syslog_thanks.patch, merged upstream.
* Enable PolicyKit support.
* Massive update to (build-)dependencies.
* Install dbus and PolicyKit files.
-- Josselin Mouette <joss@debian.org> Tue, 11 Nov 2008 10:02:25 +0100
gconf (2.22.0-1) unstable; urgency=low
* New upstream stable release:
+ debian/patches/01_no_syslog_thanks.patch:
- Updated to apply cleanly again.
+ debian/patches/02_ldap_deprecated.patch:
- Removed, applied upstream.
* debian/control.in:
+ Update Standards-Version to 3.7.3, no additional changes needed.
-- Sebastian Dröge <slomo@debian.org> Tue, 11 Mar 2008 06:18:33 +0100
gconf (2.20.1-3) unstable; urgency=low
[ Michael Banck ]
* gconf-schemas: Work around hangs on kfreebsd/hurd. Thanks Samuel
Thibault.
[ Josselin Mouette ]
* 02_ldap_deprecated.patch: replace deprecated LDAP functions by
currently working ones. Closes: #463370.
-- Josselin Mouette <joss@debian.org> Sat, 16 Feb 2008 18:38:00 +0100
gconf (2.20.1-2) unstable; urgency=low
* Add manual page for gconf-schemas. Closes: #449434. Thanks Patrick
Schoenfeld.
* gconf2.postrm: check for /var/lib/gconf before emptying it.
-- Josselin Mouette <joss@debian.org> Sat, 10 Nov 2007 00:25:40 +0100
gconf (2.20.1-1) unstable; urgency=low
* Add a "--register-all" option to gconf-schemas, to rebuild the GConf
defaults database from scratch.
* New upstream translation and minor bugfix release.
* Rename the source package to gconf, to remove the (finally unused!)
GConf 1 stuff.
* gconf2.postinst:
+ Run gconf-schemas --register-all on the first installation. This
allows installing packages shipping gconf schemas but not
depending on gconf2.
+ Also run update-gconf-defaults.
* gconf2.postrm: remove the directory contents in /var/lib/gconf/*/ to
enforce a correct behavior in the postinst.
-- Josselin Mouette <joss@debian.org> Thu, 01 Nov 2007 18:47:26 +0100
gconf2 (2.20.0-1) unstable; urgency=low
[ Sebastien Bacher ]
* debian/gconf2.postinst, debian/gconf2.prerm:
- don't remove the alternative on upgrade
[ Josselin Mouette ]
* debian/gconf2.postinst: check the version we upgrade from before
not installing the alternative.
[ Sebastian Dröge ]
* New upstream release, with no API/ABI changes.
* Upload to unstable, drop check-dist include.
-- Sebastian Dröge <slomo@debian.org> Fri, 21 Sep 2007 09:30:39 +0200
gconf2 (2.19.1-1) experimental; urgency=low
[ Josselin Mouette ]
* gconf2-common.preinst: removed, it has been in the stable release.
[ Loic Minier ]
* New upstream development release; no API change.
- Target at experimenta; include check-dist.
- Add -z defs to LDFLAGS; build failure with this flag were fixed
upstream.
* Wrap build-deps and deps.
* Cleanups.
-- Loic Minier <lool@dooz.org> Sat, 23 Jun 2007 22:08:06 +0200
gconf2 (2.18.0.1-3) unstable; urgency=low
* Upload to unstable; drop check-dist include.
* Include pointer to /usr/share/common-licenses/LGPL and fix URL in
copyright.
-- Loic Minier <lool@dooz.org> Wed, 11 Apr 2007 15:46:08 +0200
gconf2 (2.18.0.1-2) experimental; urgency=low
* 01_no_syslog_thanks.patch: stop the syslog madness (closes: #188433)
+ Use a DEBUG loglevel for things that really are debugging
information (thanks David Förster).
+ Remove all syslog calls and g_log custom handlers.
+ Log everything through GLib. This should end in .xsession-errors
anyway.
-- Josselin Mouette <joss@debian.org> Fri, 30 Mar 2007 00:40:42 +0200
gconf2 (2.18.0.1-1) experimental; urgency=low
* Build-depend on python-support (>= 0.5.3) and call dh_pysupport to
generate python:Depends instead of dh_python.
* Build-depend on autotools-dev to permit CDBS to update config.guess and
.sub.
* Set LDFLAGS instead of overriding them via DEB_CONFIGURE_SCRIPT_ENV;
build-depend on cdbs (>= 0.4.41).
* Do not override DEB_INSTALL_DOCS_gconf2, DEB_CONFIGURE_EXTRA_FLAGS,
DEB_DH_MAKESHLIBS_ARGS_libgconf2-4, DEB_DH_SHLIBDEPS_ARGS.
* Drop local clean target which attempted to work around upstream make clean
issues, but there are many many more clean issues upstream unfortunately.
* New upstream release.
- Drop patch 30_broken-g-stat, merged upstream.
* Bump up Debhelper compatibility level to 5.
-- Loic Minier <lool@dooz.org> Tue, 6 Mar 2007 12:50:29 +0100
gconf2 (2.18.0-2) experimental; urgency=low
* New patch, 30_broken-g-stat, only restore file permissions on the new file
if we can retrieve the file stats of the old files; fixes gconftool not
generating %gconf-tree.xml when missing.
-- Loic Minier <lool@dooz.org> Mon, 5 Mar 2007 15:16:57 +0100
gconf2 (2.18.0-1) experimental; urgency=low
* New upstream stable release; bug fixes and cleanups.
- Target at experimental for now.
- Include the new check-dist Makefile to prevent accidental uploads to
unstable; bump build-dep on gnome-pkg-tools to >= 0.10.
-- Loic Minier <lool@dooz.org> Sun, 4 Mar 2007 22:19:21 +0100
gconf2 (2.16.1-1) unstable; urgency=medium
* Add a get-orig-source target to retrieve the upstream tarball.
* New upstream stable release; bug fixes and translations.
-- Loic Minier <lool@dooz.org> Mon, 26 Feb 2007 20:40:25 +0100
gconf2 (2.16.0-3) unstable; urgency=low
[ Josselin Mouette ]
* rules: call clean-la.mk.
* Build-depend on gnome-pkg-tools 0.7.
[ Loic Minier ]
* Fix gconf-schemas to not die with an OSError when gconfd processes die
before being killed or can not be killed, for example when they belong to
a different user.
-- Loic Minier <lool@dooz.org> Fri, 24 Nov 2006 14:26:38 +0100
gconf2 (2.16.0-2) unstable; urgency=low
* Merge the final 2.14.0-5.
* Add CDBS' utils.
* Upload to unstable.
* Ship sample /etc/gconf/2/evoldap.conf as a conffile as we're unlikely to
tweak it a lot for Debian.
* Ship the evoldap LDAP schema in /usr/share/doc/gconf2-common.
* Drop debian/gconftool-2.1; merged upstream.
* Add upstream programming examples to libgconf2-dev.
* Ship upstream doc/FAQ.txt and drop our local debian/FAQ.
-- Loic Minier <lool@dooz.org> Thu, 19 Oct 2006 09:01:48 +0200
gconf2 (2.16.0-1) experimental; urgency=low
* New upstream release; no API change.
- Drop patch 20_gconftool-2-manpage-typo, merged upstream.
- Build-depend on libxml-parser-perl.
-- Loic Minier <lool@dooz.org> Thu, 5 Oct 2006 15:50:05 +0200
gconf2 (2.14.0-5) unstable; urgency=medium
[ Josselin Mouette ]
* Require gnome-pkg-tools 0.6.
* Use ${gnome:Version} and ${gnome:NextVersion}.
* Include the gnome-versions.mk snippet.
[ Loic Minier ]
* Include the mandatory and default paths for desktop-profiles
($(ENV_MANDATORY_PATH) and $(ENV_DEFAULTS_PATH)); closes: #310065.
* Build-depend on gtk-doc-tools for the devhelp file.
* Build-depend on and libldap2-dev for the evoldap backend.
-- Loic Minier <lool@dooz.org> Tue, 10 Oct 2006 15:51:06 +0200
gconf2 (2.14.0-4) unstable; urgency=medium
* Let update-gconf-defaults ignore .dpkg-tmp files in
/usr/share/gconf/defaults, as it breaks upgrades of packages with .entries
files.
-- Loic Minier <lool@dooz.org> Tue, 8 Aug 2006 12:36:41 +0200
gconf2 (2.14.0-3) unstable; urgency=low
* update-gconf-defaults: better error handling.
+ When it isn't run as root.
+ When /usr/share/gconf/defaults is empty (closes: #381734).
-- Josselin Mouette <joss@debian.org> Sun, 6 Aug 2006 23:09:41 +0200
gconf2 (2.14.0-2) unstable; urgency=low
[ Josselin Mouette ]
* Make the package binNMU-safe.
+ Build-depend on dpkg-dev 1.13.19.
+ Use ${source:Version}.
* Rework update-gconf-defaults to accept .entries files in
/usr/share/gconf/defaults.
* Standards version is 3.7.2.
[ Loic Minier ]
* Fix {$source:Version} versus ${source:Version}.
* Use ${binary:Version} instead of ${Source-Version} to make package fully
binNMU-safe
* New patch, 20_gconftool-2-manpage-typo, to add missing newline in man
page, thanks Remi Vanicat.
(Closes: #372695)
* Rename gconf_path_max patch to 25_gconf-path-max-hurd.
* Fix watch file.
-- Josselin Mouette <joss@debian.org> Wed, 2 Aug 2006 23:40:47 +0200
gconf2 (2.14.0-1) unstable; urgency=low
[ Guilherme de S. Pastore ]
* New upstream release.
* debian/patches/gconftool_speed.diff:
- dropped; similar change applied upstream.
J.H.M. Dassen (Ray):
* [debian/control.in] Made glib build dependency explicit and versioned it
following configure.in .
[ Sjoerd Simons ]
* Updated watch file
-- Sjoerd Simons <sjoerd@debian.org> Mon, 20 Mar 2006 11:54:58 +0100
gconf2 (2.13.5-1) experimental; urgency=low
* New upstream release.
* 60gconf2_merge-tree: give up on merging the user's home directory by
default, as it can break with NFS servers, including the ones in
Debian.
+ gconf2-common.{install,preinst}: remove the file.
+ Stop recommending zenity.
+ Document that in the README.Debian.
* rules: update shlibs.
-- Josselin Mouette <joss@debian.org> Sun, 5 Mar 2006 19:15:47 +0100
gconf2 (2.12.1-12) unstable; urgency=low
* gconftool_speed.diff: don't sync after every schema file when using
--makefile-[un]install-rule. This should solve the speed issue.
* gconf-schemas: remove the hack to merge the schemas in a single
file, it should be unnecessary now.
-- Josselin Mouette <joss@debian.org> Fri, 3 Mar 2006 14:53:31 +0100
gconf2 (2.12.1-11) unstable; urgency=low
* debian/gconf-schemas:
- patch by Gabor Burjan <buga@jabber.hu> slightly modified, fix the case
where there is no gconfd-2 running
-- Sebastien Bacher <seb128@debian.org> Thu, 2 Mar 2006 17:41:03 +0100
gconf2 (2.12.1-10) unstable; urgency=low
[ Josselin Mouette ]
* gconf-schemas:
+ Complete rewrite, in python.
+ Now run gconftool only once, for better performance (closes: #353986).
+ Improve performance even further by merging files when there are
several ones.
-- Sebastien Bacher <seb128@debian.org> Thu, 2 Mar 2006 13:47:48 +0100
gconf2 (2.12.1-9) unstable; urgency=high
* The "it's good to parse options, it's better to use them" release.
* gconf-schemas: really uninstall the defaults (closes: #352071).
-- Josselin Mouette <joss@debian.org> Thu, 9 Feb 2006 17:56:51 +0100
gconf2 (2.12.1-8) unstable; urgency=low
* update-gconf-defaults.8: documentation for update-gconf-defaults.
* gconf2.manpages: ship it.
-- Josselin Mouette <joss@debian.org> Sun, 8 Jan 2006 11:20:11 +0100
gconf2 (2.12.1-7) unstable; urgency=low
* rules: Pass --as-needed to ld, so that gconf-sanity-check doesn't
get linked with an overly long list of dependencies
(closes: #346375).
-- Josselin Mouette <joss@debian.org> Sat, 7 Jan 2006 15:14:22 +0100
gconf2 (2.12.1-6) unstable; urgency=low
* Upload to unstable.
-- Josselin Mouette <joss@debian.org> Thu, 5 Jan 2006 07:59:03 +0100
gconf2 (2.12.1-5) experimental; urgency=low
* 60gconf2_merge-tree: if zenity is installed, ask for confirmation
upon login before migrating the gconf tree to %gconf-tree.xml.
* control.in: recommend zenity.
* README.Debian: time to document all the Debian specifities GConf now
has.
* rules: libgconfbackend has moved to libgconf2-4, reflect this for
dh_makeshlibs.
-- Josselin Mouette <joss@debian.org> Thu, 15 Dec 2005 23:49:03 +0100
gconf2 (2.12.1-4) experimental; urgency=high
* Quote directory and file variables to permit spaces and to compare strings
when they could be empty. (Closes: #339425)
[debian/gconf2.postinst, debian/libgconf2-dev.postinst]
-- Loic Minier <lool@dooz.org> Wed, 16 Nov 2005 09:27:26 +0100
gconf2 (2.12.1-3) experimental; urgency=low
* control.in: really build-depend on python (closes: #338957).
-- Josselin Mouette <joss@debian.org> Tue, 15 Nov 2005 11:03:15 +0100
gconf2 (2.12.1-2) experimental; urgency=low
* debian/control.in:
- drop version of the build-dependency on libgtk2.0-dev
- fix FTBFS by build-depending on python (Closes: #338957)
-- Guilherme de S. Pastore <guilherme.pastore@terra.com.br> Mon, 14 Nov 2005 00:57:45 -0200
gconf2 (2.12.1-1) experimental; urgency=low
* New upstream release.
* gconf2-common.postrm: check for /etc/gconf/2 before removing it
(closes: #335941).
* Merge the gconf directory trees for better performance:
+ 60gconf2_merge-tree: new session startup script. This script
forces the rebuild of ~/.gconf.
+ gconf2-common.install: install this script in /etc/X11/Xsession.d.
+ control.in: depend on psmisc (for killall).
+ gconf2.postinst: run gconf-merge-tree on /var/lib/gconf/defaults
if necessary.
+ gconf2-common.postrm: entirely purge /var/lib/gconf,
/etc/gconf.xml.defaults and /etc/gconf.xml.mandatory.
+ gconf2-common.postinst: the chmod-fixes aren't necessary anymore.
* uupdate: removed, unused.
* Provide a framework to easily set up defaults in Debian packages
(closes: #329340).
+ update-gconf-defaults: new script, takes defaults in a specific format
in /usr/share/gconf/defaults and generates a gconf tree in
/var/lib/gconf/debian.defaults.
+ gconf2.install: install it.
+ control.in: depend on python for its execution.
+ rules: run dh_python.
+ gconf2-common.dirs: create /var/lib/gconf/debian.defaults and
/usr/share/gconf/defaults, and remove the unused directories
in /usr/share/gconf.
+ default.path: remove references to the /usr/share directories, and
reference the brand new /var/lib/gconf/debian.defaults instead.
* Settle for World domination.
-- Josselin Mouette <joss@debian.org> Sun, 13 Nov 2005 23:05:39 +0100
gconf2 (2.12.0-4) experimental; urgency=low
* Forward some changes in the unstable packages:
* debian/gconf2-common.dirs:
- list "/etc/gconf/2".
* Make the new gconf2 package conflict with the old libgconf2-4
package, to avoid the case where there is no gconfd-2 binary
installed at all.
* watch: update to 2.12.
* load_empty_dirs.diff: removed, I finally have other projects to
support changing the default values.
-- Josselin Mouette <joss@debian.org> Sun, 25 Sep 2005 21:33:54 +0200
gconf2 (2.12.0-3) experimental; urgency=low
* gconf2-common.postinst: fix permissions that seem to be set wrong in
some cases.
* load_empty_dirs.diff: load directories even when they are empty.
This should be better for distribution of defaults in Debian
packages.
-- Josselin Mouette <joss@debian.org> Wed, 21 Sep 2005 20:12:16 +0200
gconf2 (2.12.0-2) experimental; urgency=low
* Remove circular dependency between libgconf2-4 and gconf2
(closes: #316403).
+ move libexecdir to /usr/lib/libgconf2-4,
+ new package: gconf2-common,
+ move the defaults directories to gconf2-common,
+ move the documentation to libgconf2-dev,
+ move the configuration file to gconf2-common and handle it with ucf,
+ move locale and SGML stuff to gconf2-common.
* Rewrite the package descriptions.
-- Josselin Mouette <joss@debian.org> Sun, 18 Sep 2005 13:22:59 +0200
gconf2 (2.12.0-1) experimental; urgency=low
* New upstream release.
* rules: bump shlibs version.
* gconf2.postinst: remove bashism.
-- Josselin Mouette <joss@debian.org> Wed, 14 Sep 2005 22:40:23 +0200
gconf2 (2.10.1-2) unstable; urgency=low
* gconf2.postinst: install the manpage as a slave alternative
(closes: #314999).
* gconf2.{install,links}: install documentation to /usr/share/doc
(closes: #272226).
+ rules: don't compress these files.
+ gconf2.postinst: make the symlink by hand for the transition.
* rules,control.in: only recommend libgtk2.0-0, for gconf-sanity-check
(closes: #267304).
* Customize the default path file, which now:
- allows to set defaults or mandatory settings in packages;
- sets a place for autogenerated defaults in /var/lib;
- reads user customization files for Sabayon.
(closes: #310065).
+ path: the new file.
+ gconf2.install: install it in place of the other one.
+ gconf2.dirs: create the corresponding directories.
* gconf-schemas: new script, to be used by dh_gconf.
+ gconf2.install: install it.
* copyright: update FSF address.
* control.in: bump debhelper dependency to 4.1.
* gconf.devhelp: removed, unused.
* postinst,prerm: renamed to gconf2.{postinst,prerm}.
-- Josselin Mouette <joss@debian.org> Thu, 8 Sep 2005 01:12:45 +0200
gconf2 (2.10.1-1) unstable; urgency=low
* New upstream release.
+ gconfd now exits when unused (closes: #311252).
* gconfd_notify_other_listeners.diff: removed, integrated upstream.
* Set myself as maintainer.
* Standards-version is 3.6.2.
-- Josselin Mouette <joss@debian.org> Wed, 13 Jul 2005 00:55:47 +0200
gconf2 (2.10.0-2) unstable; urgency=low
* Upload to unstable.
-- Josselin Mouette <joss@debian.org> Tue, 7 Jun 2005 20:28:17 +0200
gconf2 (2.10.0-1) experimental; urgency=low
* New upstream release.
* Replaces the .files with .install files.
* debian/compat:
- added.
* debian/gconf2.lintian, debian/libgconf.lintian:
- removed
* debian/FAQ:
- removed iso8859 characters.
* debian/control.in:
- removed packages need for the doc building from Build-Depends since we
don't build it anymore, changed dbs with cdbs.
- added the homepage to descriptions.
* debian/patches/01_default_locale.patch:
- removed, the changes are in the new version.
* debian/rules:
- switched to CDBS.
- turned the doc building off since the html files are provided upstream.
* debian/watch:
- updated.
-- Sebastien Bacher <seb128@debian.org> Thu, 24 Mar 2005 00:53:21 +0100
gconf2 (2.8.1-4) unstable; urgency=low
* debian/patches/01_default_locale.patch:
- fix the problem with default values missing in some locales.
* debian/patches/gconf_path_max.diff:
- patch by Michael Banck <mbanck@debian.org> to build on hurd.
-- Sebastien Bacher <seb128@debian.org> Sun, 21 Nov 2004 18:25:39 +0100
gconf2 (2.8.1-3) unstable; urgency=low
* gconfd_notify_other_listeners.diff: fix null-pointer free that caused
crashes of gconfd in some cases.
* Removed build-depend on libdb3-dev (closes: #282325).
-- Josselin Mouette <joss@debian.org> Sun, 21 Nov 2004 14:01:09 +0100
gconf2 (2.8.1-2) unstable; urgency=low
* Upload to unstable.
-- Sebastien Bacher <seb128@debian.org> Wed, 17 Nov 2004 21:23:26 +0100
gconf2 (2.8.1-1) experimental; urgency=low
* New upstream release.
* [debian/watch] Updated.
-- J.H.M. Dassen (Ray) <jdassen@debian.org> Tue, 12 Oct 2004 19:53:53 +0200
gconf2 (2.8.0-1) experimental; urgency=low
* New upstream release.
* [debian/control.in] Removed gtk-doc-tools, docbook-xml build dependencies;
we just use the HTML docs from the upstream tarball.
Added explicit autoconf, autotools-dev build dependencies.
* [debian/rules] configure --disable-gtk-doc .
-- J.H.M. Dassen (Ray) <jdassen@debian.org> Tue, 14 Sep 2004 18:56:58 +0200
gconf2 (2.7.92-1) experimental; urgency=low
* New upstream development release.
-- J.H.M. Dassen (Ray) <jdassen@debian.org> Mon, 30 Aug 2004 14:22:59 +0200
gconf2 (2.7.91.1-1) experimental; urgency=low
* New upstream development release.
-- J.H.M. Dassen (Ray) <jdassen@debian.org> Fri, 20 Aug 2004 18:12:41 +0200
gconf2 (2.7.91-1) experimental; urgency=low
* New upstream development release.
* [debian/control.in] Moved the devel package to the `libdevel' section.
-- J.H.M. Dassen (Ray) <jdassen@debian.org> Tue, 17 Aug 2004 19:59:12 +0200
gconf2 (2.7.90-1) experimental; urgency=low
* New upstream development release.
* [debian/rules] Ensure at build time all symbols are resolvable; make the
linker work a bit harder so dynamic loading can be done faster.
* [patches/gnu_os_maxpathlen_fix.diff] Disabled as it no longer applies
cleanly.
* [debian/shlibs.local] Bumped just in case.
-- J.H.M. Dassen (Ray) <jdassen@debian.org> Sun, 15 Aug 2004 10:45:26 +0200
gconf2 (2.7.1-1) experimental; urgency=low
* GNOME Team Upload.
* New (development) upstream release.
-- Marc 'HE' Brockschmidt <he@debian.org> Sat, 19 Jun 2004 17:00:55 +0200
gconf2 (2.6.1-2) unstable; urgency=low
* GNOME Team Upload.
* Upload in unstable
-- Sebastien Bacher <seb128@debian.org> Tue, 25 May 2004 19:57:37 +0200
gconf2 (2.6.1-1) experimental; urgency=low
* New upstream release.
-- Sebastien Bacher <seb128@debian.org> Tue, 20 Apr 2004 19:23:36 +0200
gconf2 (2.6.0-2) experimental; urgency=low
* Added Build-Depends on docbook-xml (Closes: #240184).
-- Sebastien Bacher <seb128@debian.org> Wed, 31 Mar 2004 23:05:55 +0200
gconf2 (2.6.0-1) experimental; urgency=low
* New upstream release.
* debian/control.in:
+ updated Build-Depends.
* debian/libgconf2-2.substvars:
+ removed.
-- Sebastien Bacher <seb128@debian.org> Tue, 23 Mar 2004 23:32:26 +0100
gconf2 (2.4.0.1-3) unstable; urgency=low
* debian/control.in:
+ update for the Gnome Team.
* debian/gconf.devhelp:
+ include this file to have the API available in devhelp.
* debian/gconftool-2.1:
+ include manpage from the CVS (Closes: #178887).
* debian/rules:
+ change dh_installmanpages for dh_installman.
+ install the devhelp file.
+ remove dh_undocumented call.
+ update for the Gnome Team.
+ use --enable-gtk-doc to generate the missing doc (Closes: #203645).
-- Sebastien Bacher <seb128@debian.org> Thu, 1 Jan 2004 16:14:15 +0100
gconf2 (2.4.0.1-2) unstable; urgency=low
* Fix Build-Depends : liborbit2-dev (2.8.0, should be 1:2.8.0).
-- Sebastien Bacher <seb128@debian.org> Sat, 18 Oct 2003 02:53:23 +0200
gconf2 (2.4.0.1-1) unstable; urgency=low
* New upstream release
* GNOME Team upload
-- Sebastien Bacher <seb128@debian.org> Wed, 15 Oct 2003 18:36:26 +0200
gconf2 (2.2.1-4) unstable; urgency=low
* Build-Depends on gtk2 again.
It is necessary to build gconf-sanity-check-2 (close: #213437)
-- Takuo KITAME <kitame@debian.org> Thu, 2 Oct 2003 12:28:51 +0900
gconf2 (2.2.1-3) unstable; urgency=low
* Fix again postinst (closes: #208600, #208611, #208604)
-- Takuo KITAME <kitame@debian.org> Thu, 4 Sep 2003 10:13:16 +0900
gconf2 (2.2.1-2) unstable; urgency=low
* Fix postinst (closes: #205703)
* remove libgtk2.0-dev from Build-Depends, it is not needed.
and fix configure (closes: #187700)
* remove symlink to manpage which does not exist(closes: #198857)
* register gconf-1.0.dtd (closes: #177905)
-- Takuo KITAME <kitame@debian.org> Wed, 3 Sep 2003 17:08:44 +0900
gconf2 (2.2.1-1) unstable; urgency=low
* New upstream release
* applied PATH_MAX patch for GNU/Hurd (closes: #164583)
* Build-Depends on libgtk2.0-dev (closes: #187700)
* maintainer upload, closes NMU fixes (closes: #172387, #172388, #175309, #175515)
* fix description (closes: #189515)
-- Takuo KITAME <kitame@debian.org> Tue, 17 Jun 2003 12:31:34 +0900
gconf2 (2.2.0-1) unstable; urgency=low
* New upstream release
* Fix build-depends (closes: #177743, #177768)
-- Takuo KITAME <kitame@debian.org> Wed, 22 Jan 2003 12:19:55 +0900
gconf2 (2.1.90-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@debian.org> Mon, 20 Jan 2003 11:58:41 +0900
gconf2 (1.2.1-4) unstable; urgency=low
* Update config.{guess,sub}
* change Maintainer address to @debian.org
-- Takuo KITAME <kitame@debian.org> Wed, 13 Nov 2002 14:44:43 +0900
gconf2 (1.2.1-3) unstable; urgency=low
* Maintainer upload. (closes: #156240, #149733)
Thanks to Michael and Christian's NMU
* fix shlibs. include version number
* Conflict with older libgconf11 versions which expected gconfd-2 in /usr/bin.
-- Takuo KITAME <kitame@northeye.org> Mon, 26 Aug 2002 15:45:01 +0900
gconf2 (1.2.1-2.1) unstable; urgency=low
* NMU
* Really fix 156240. Those binaries should go in /usr/lib/gconf2 and not
/usr/bin (Closes: #156240)
* Build with --disable-gtk-doc Documentation already generated by
upstream.
* Remove debian/libgconf2.postinst This file contains a ldconfig call not
needed with DH_COMPAT=3
* debian/rules remove not needed double dh_makeshlibs calls and make a
versioned gconf2 dependency for libgconf2-4 to really fix #149733.
-- Christian Marillat <marillat@debian.org> Thu, 22 Aug 2002 18:58:46 +0200
gconf2 (1.2.1-2) unstable; urgency=low
* configure with --libexecdir=\$${prefix}/bin (closes: #156240)
-- Takuo KITAME <kitame@northeye.org> Fri, 16 Aug 2002 15:40:35 +0900
gconf2 (1.2.1-1) unstable; urgency=low
* New upstream release
* build against libgtk2.0-0png3
-- Takuo KITAME <kitame@northeye.org> Thu, 8 Aug 2002 12:37:14 +0900
gconf2 (1.2.0-1) unstable; urgency=low
* New upstream release
* libgconf2-4: change shlibs to gconf2 (>= ${VERSION})
Package will depends on gconf2 instead of libgconf2,
No problems, gconf2 depends on versioned libgconf2. (closes: #149733)
-- Takuo KITAME <kitame@northeye.org> Thu, 13 Jun 2002 03:07:55 +0900
gconf2 (1.1.11-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Tue, 4 Jun 2002 00:13:36 +0900
gconf2 (1.1.10-2) unstable; urgency=low
* move /usr/lib/GConf/2/libgconfbackend-xml.so into gconf2 (closes: #148136)
-- Takuo KITAME <kitame@northeye.org> Fri, 31 May 2002 15:53:49 +0900
gconf2 (1.1.10-1) unstable; urgency=low
* New upstream release
* use dbs
-- Takuo KITAME <kitame@northeye.org> Wed, 1 May 2002 09:47:52 +0900
gconf2 (1.1.9-2) unstable; urgency=low
* fix place of Documentation (closes: #140782)
* includes FAQ and README.Debian
-- Takuo KITAME <kitame@northeye.org> Tue, 23 Apr 2002 12:36:11 +0900
gconf2 (1.1.9-1) unstable; urgency=low
* New upstream release
* bug fixed by upstrem.
closes: #138188 Can't deal with locales not specified in the schema file
-- Takuo KITAME <kitame@northeye.org> Mon, 1 Apr 2002 06:18:50 +0900
gconf2 (1.1.8-6) unstable; urgency=high
* fix bashism in postrm (closes: #140133, #140221)
-- Takuo KITAME <kitame@northeye.org> Thu, 28 Mar 2002 11:33:57 +0900
gconf2 (1.1.8-5) unstable; urgency=low
* build against glib2.0 (closes: #139611)
-- Takuo KITAME <kitame@northeye.org> Thu, 21 Mar 2002 00:32:52 +0900
gconf2 (1.1.8-4) unstable; urgency=low
* build against libgtk1.3-15
* debian/gconf2.postrm:
- rmdir -p /etc/gconf/2 on purge (closes: #135687)
-- Takuo KITAME <kitame@northeye.org> Tue, 26 Feb 2002 13:09:39 +0900
gconf2 (1.1.8-3) unstable; urgency=low
* build against libgtk1.3-14
-- Takuo KITAME <kitame@northeye.org> Fri, 22 Feb 2002 20:48:34 +0900
gconf2 (1.1.8-2) unstable; urgency=low
* build against libatk12
-- Takuo KITAME <kitame@northeye.org> Fri, 15 Feb 2002 10:18:31 +0900
gconf2 (1.1.8-1) unstable; urgency=low
* New upstream release
* libgconf2-dev depends on liborbit2-dev (closes: #133630)
* build against libatk11
-- Takuo KITAME <kitame@northeye.org> Wed, 13 Feb 2002 14:32:23 +0900
gconf2 (1.1.7-3) unstable; urgency=low
* build against new linc and ORBit2
-- Takuo KITAME <kitame@northeye.org> Mon, 11 Feb 2002 22:26:43 +0900
gconf2 (1.1.7-2) unstable; urgency=low
* change soname to 4
-- Takuo KITAME <kitame@northeye.org> Fri, 8 Feb 2002 05:05:07 +0900
gconf2 (1.1.7-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Wed, 6 Feb 2002 01:13:05 +0900
gconf2 (1.1.6-2) unstable; urgency=low
* Build against libglib1.3-13
* update Build-Depends: libglib1.3-dev (>= 1.3.13)
-- Takuo KITAME <kitame@northeye.org> Sun, 3 Feb 2002 23:36:56 +0900
gconf2 (1.1.6-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Fri, 18 Jan 2002 20:59:27 +0000
gconf2 (1.1.5-2) unstable; urgency=low
* build against latest libraries.
* update Build-Depends.
-- Takuo KITAME <kitame@northeye.org> Tue, 8 Jan 2002 10:01:24 +0000
gconf2 (1.1.5-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Wed, 2 Jan 2002 10:39:56 +0000
gconf2 (1.1.4-6) unstable; urgency=low
* debian/control:
- Fix Build-Depends: line and add 'indent' (closes: #126581)
-- Takuo KITAME <kitame@northeye.org> Thu, 27 Dec 2001 06:14:23 +0000
gconf2 (1.1.4-5) unstable; urgency=low
* debian/control:
- fixed typo in description (closes: #124952)
-- Takuo KITAME <kitame@northeye.org> Mon, 17 Dec 2001 23:45:27 +0000
gconf2 (1.1.4-4) unstable; urgency=low
* fix build-depends, again (closes: #122995)
-- Takuo KITAME <kitame@northeye.org> Sun, 9 Dec 2001 03:30:49 +0000
gconf2 (1.1.4-3) unstable; urgency=low
* Build against new glib1.3.11
* fix glib-object.h problem.
* Build-Depends: liborbit2-dev (>= 2.3.99) (closes: #122263)
-- Takuo KITAME <kitame@northeye.org> Fri, 7 Dec 2001 20:48:19 +0000
gconf2 (1.1.4-2) unstable; urgency=low
* fix build-depends. (closes: #121554)
-- Takuo KITAME <kitame@northeye.org> Wed, 28 Nov 2001 15:53:43 +0000
gconf2 (1.1.4-1) unstable; urgency=low
* New upstream release
* Build against glib1.3.10
-- Takuo KITAME <kitame@northeye.org> Tue, 13 Nov 2001 00:11:10 +0000
gconf2 (1.1.3-1) unstable; urgency=low
* New upstream release
* New package name gconf2, libgconf2, libgconf2-dev
-- Takuo KITAME <kitame@northeye.org> Fri, 26 Oct 2001 04:30:43 +0000
gconf (1.0.6-3) unstable; urgency=low
* g_utf8_validate renamed to gconf_g_utf8_validate (It is internal!!)
comment out unused g_utf8_skip
It'll fix Evolution(Summary) with gconf 1.0.6. (closes: #116423)
-- Takuo KITAME <kitame@northeye.org> Mon, 22 Oct 2001 19:39:59 +0900
gconf (1.0.6-2) unstable; urgency=low
* Fixed postinst (closes: #116176, #116177, #116178, #116179)
-- Takuo KITAME <kitame@northeye.org> Fri, 19 Oct 2001 12:25:55 +0900
gconf (1.0.6-1) unstable; urgency=low
* New upstream release
* fixed wrong URL in README (closes: #112000)
* fix permission of /etc/gconf/gconf.xml.defaults (closes: #112875, #115920)
-- Takuo KITAME <kitame@northeye.org> Thu, 18 Oct 2001 10:01:17 +0900
gconf (1.0.5-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Mon, 15 Oct 2001 13:35:23 +0900
gconf (1.0.4-3) unstable; urgency=low
* libgconf-dev: depends liboaf-dev (closes: #111251)
-- Takuo KITAME <kitame@northeye.org> Fri, 7 Sep 2001 21:35:36 +0900
gconf (1.0.4-2) unstable; urgency=low
* rebuild with latest oaf. It will be fix Bug#110874. (closes: Bug#110874)
-- Takuo KITAME <kitame@northeye.org> Sun, 2 Sep 2001 01:20:31 +0900
gconf (1.0.4-1) unstable; urgency=low
* New upstream release (closes: Bug#109689)
-- Takuo KITAME <kitame@northeye.org> Fri, 24 Aug 2001 02:30:51 +0900
gconf (1.0.3-2) unstable; urgency=low
* install /etc/gconf/gconf.xml.mandatory (closes: Bug#108054)
-- Takuo KITAME <kitame@northeye.org> Thu, 9 Aug 2001 00:48:00 +0900
gconf (1.0.3-1) unstable; urgency=low
* New upstream release
* include gconf.xml.defaults (closes: Bug#105894)
* include /etc/gconf/1/ (closes: Bug#105896)
* rm -rf /etc/gconf when purge gconf (closes: Bug#104415)
-- Takuo KITAME <kitame@northeye.org> Tue, 7 Aug 2001 03:55:17 +0900
gconf (1.0.1-3) unstable; urgency=low
* update config.{guess,sub} (closes: Bug#103376)
-- Takuo KITAME <kitame@northeye.org> Sun, 8 Jul 2001 19:06:37 +0900
gconf (1.0.1-2) unstable; urgency=low
* escape gnome-config checks in configure.in.
It's not needed, I think. (closes: Bug#98350)
-- Takuo KITAME <kitame@northeye.org> Sun, 27 May 2001 16:50:45 +0900
gconf (1.0.1-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Sun, 20 May 2001 04:16:32 +0900
gconf (1.0.0-4) unstable; urgency=low
* debian/control: fix description. (closes: Bug#94179)
-- Takuo KITAME <kitame@northeye.org> Thu, 19 Apr 2001 03:07:13 +0900
gconf (1.0.0-3) unstable; urgency=low
* Build-Depends: added versionned libguile-dev (>= 1:1.4-10) (closes: Bug#93101)
* Built with libdb3 (closes: Bug#93192, Bug#93185)
-- Takuo KITAME <kitame@northeye.org> Sun, 8 Apr 2001 13:59:35 +0900
gconf (1.0.0-2) unstable; urgency=low
* fix Build-Depends zlib1g-dev (closes: Bug#90380)
-- Takuo KITAME <kitame@northeye.org> Thu, 22 Mar 2001 13:12:36 +0900
gconf (1.0.0-1) unstable; urgency=low
* New upstream release
* fix Build-Depends libgtk1.2-dev. (closes: Bug#89567)
-- Takuo KITAME <kitame@northeye.org> Wed, 14 Mar 2001 12:07:30 +0900
gconf (0.50-2) unstable; urgency=low
* libgconf-dev: Depends on gconf (= ${Source-Version}) (closes: Bug#89309)
* --disable-debug (closes: Bug#81210)
-- Takuo KITAME <kitame@northeye.org> Tue, 13 Mar 2001 19:00:54 +0900
gconf (0.50-1) unstable; urgency=low
* New upstream release
* libguile-dev is now availeable, Build-Depends: libguile-dev is right. (closes: Bug#84454)
* gconf binaries are now in own package 'gconf'.
-- Takuo KITAME <kitame@northeye.org> Wed, 28 Feb 2001 12:11:35 +0900
gconf (0.12-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Thu, 1 Feb 2001 13:13:38 +0900
gconf (0.11-2) unstable; urgency=low
* debian/control: Build-Depends (closes: Bug#77623)
-- Takuo KITAME <kitame@northeye.org> Wed, 22 Nov 2000 09:02:56 +0900
gconf (0.11-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Sun, 29 Oct 2000 03:54:31 +0900
gconf (0.10-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Wed, 11 Oct 2000 09:47:19 +0900
gconf (0.8-1) unstable; urgency=low
* New upstream release
-- Takuo KITAME <kitame@northeye.org> Fri, 18 Aug 2000 05:47:20 +0900
gconf (0.5.000512-1) unstable; urgency=low
* Initial Release.
-- Vincent Renardias <vincent@debian.org> Mon, 15 May 2000 17:43:46 +0200