ChangeSet 1.1315.1.10, 2003/09/22 11:05:20-07:00, greg@kroah.com [PATCH] I2C: add the i2c-savage4 i2c bus driver This is based on the lmsensor cvs version of the driver, but is cleaned it up and ported it to 2.6. drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 drivers/i2c/busses/i2c-savage4.c | 205 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+) diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig --- a/drivers/i2c/busses/Kconfig Mon Sep 22 16:14:28 2003 +++ b/drivers/i2c/busses/Kconfig Mon Sep 22 16:14:28 2003 @@ -113,6 +113,16 @@ This driver can also be built as a module. If so, the module will be called i2c-piix4. +config I2C_SAVAGE4 + tristate "S3 Savage 4" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + S3 Savage 4 I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-savage4. + config I2C_SIS5595 tristate "SiS 5595" depends on I2C && PCI && EXPERIMENTAL diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile --- a/drivers/i2c/busses/Makefile Mon Sep 22 16:14:28 2003 +++ b/drivers/i2c/busses/Makefile Mon Sep 22 16:14:28 2003 @@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_ISA) += i2c-isa.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o diff -Nru a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c --- /dev/null Wed Dec 31 16:00:00 1969 +++ b/drivers/i2c/busses/i2c-savage4.c Mon Sep 22 16:14:28 2003 @@ -0,0 +1,205 @@ +/* + i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard , + Philip Edelbrock , + Ralph Metzler , and + Mark D. Studebaker + + Based on code written by Ralph Metzler and + Simon Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* This interfaces to the I2C bus of the Savage4 to gain access to + the BT869 and possibly other I2C devices. The DDC bus is not + yet supported because its register is not memory-mapped. + However we leave the DDC code here, commented out, to make + it easier to add later. +*/ + +#include +#include +#include +#include +#include +#include + +/* 3DFX defines */ +#define PCI_CHIP_SAVAGE3D 0x8A20 +#define PCI_CHIP_SAVAGE3D_MV 0x8A21 +#define PCI_CHIP_SAVAGE4 0x8A22 +#define PCI_CHIP_SAVAGE2000 0x9102 +#define PCI_CHIP_PROSAVAGE_PM 0x8A25 +#define PCI_CHIP_PROSAVAGE_KM 0x8A26 +#define PCI_CHIP_SAVAGE_MX_MV 0x8c10 +#define PCI_CHIP_SAVAGE_MX 0x8c11 +#define PCI_CHIP_SAVAGE_IX_MV 0x8c12 +#define PCI_CHIP_SAVAGE_IX 0x8c13 + +#define REG 0xff20 /* Serial Port 1 Register */ + +/* bit locations in the register */ +#define DDC_ENAB 0x00040000 +#define DDC_SCL_OUT 0x00080000 +#define DDC_SDA_OUT 0x00100000 +#define DDC_SCL_IN 0x00200000 +#define DDC_SDA_IN 0x00400000 +#define I2C_ENAB 0x00000020 +#define I2C_SCL_OUT 0x00000001 +#define I2C_SDA_OUT 0x00000002 +#define I2C_SCL_IN 0x00000008 +#define I2C_SDA_IN 0x00000010 + +/* initialization states */ +#define INIT2 0x20 +#define INIT3 0x04 + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +static void *ioaddr; + +/* The sav GPIO registers don't have individual masks for each bit + so we always have to read before writing. */ + +static void bit_savi2c_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if(val) + r |= I2C_SCL_OUT; + else + r &= ~I2C_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_savi2c_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if(val) + r |= I2C_SDA_OUT; + else + r &= ~I2C_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +/* The GPIO pins are open drain, so the pins always remain outputs. + We rely on the i2c-algo-bit routines to set the pins high before + reading the input from other chips. */ + +static int bit_savi2c_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SCL_IN)); +} + +static int bit_savi2c_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SDA_IN)); +} + +/* Configures the chip */ + +static int config_s4(struct pci_dev *dev) +{ + unsigned int cadr; + + /* map memory */ + cadr = dev->resource[0].start; + cadr &= PCI_BASE_ADDRESS_MEM_MASK; + ioaddr = ioremap_nocache(cadr, 0x0080000); + if (ioaddr) { + /* writel(0x8160, ioaddr + REG2); */ + writel(0x00000020, ioaddr + REG); + dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr); + return 0; + } + return -ENODEV; +} + +static struct i2c_algo_bit_data sav_i2c_bit_data = { + .setsda = bit_savi2c_setsda, + .setscl = bit_savi2c_setscl, + .getsda = bit_savi2c_getsda, + .getscl = bit_savi2c_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter savage4_i2c_adapter = { + .owner = THIS_MODULE, + .name = "I2C Savage4 adapter", + .algo_data = &sav_i2c_bit_data, +}; + +static struct pci_device_id savage4_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) }, + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) }, + { 0, } +}; + +static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + retval = config_s4(dev); + if (retval) + return retval; + + /* set up the sysfs linkage to our parent device */ + savage4_i2c_adapter.dev.parent = &dev->dev; + + return i2c_bit_add_bus(&savage4_i2c_adapter); +} + +static void __devexit savage4_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&savage4_i2c_adapter); + iounmap(ioaddr); +} + +static struct pci_driver savage4_driver = { + .name = "savage4 smbus", + .id_table = savage4_ids, + .probe = savage4_probe, + .remove = __devexit_p(savage4_remove), +}; + +static int __init i2c_savage4_init(void) +{ + return pci_module_init(&savage4_driver); +} + +static void __exit i2c_savage4_exit(void) +{ + pci_unregister_driver(&savage4_driver); +} + +MODULE_AUTHOR("Frodo Looijaard , " + "Philip Edelbrock , " + "Ralph Metzler , " + "and Mark D. Studebaker "); +MODULE_DESCRIPTION("Savage4 I2C/SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_savage4_init); +module_exit(i2c_savage4_exit);