OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 14:50:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/netmask-2.4.3-2.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/netmask.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.8 MB/s | 863 kB 00:04 ETA Local RPMS 11% [== ] 2.8 MB/s | 1.6 MB 00:04 ETA Local RPMS 18% [===- ] 2.8 MB/s | 2.6 MB 00:03 ETA Local RPMS 26% [===== ] 2.9 MB/s | 3.6 MB 00:03 ETA Local RPMS 32% [======- ] 2.9 MB/s | 4.6 MB 00:03 ETA Local RPMS 40% [======== ] 2.9 MB/s | 5.6 MB 00:02 ETA Local RPMS 46% [========= ] 2.9 MB/s | 6.5 MB 00:02 ETA Local RPMS 54% [==========- ] 2.9 MB/s | 7.5 MB 00:02 ETA Local RPMS 55% [=========== ] 2.7 MB/s | 7.7 MB 00:02 ETA Local RPMS 61% [============ ] 2.7 MB/s | 8.6 MB 00:01 ETA Local RPMS 68% [=============- ] 2.7 MB/s | 9.5 MB 00:01 ETA Local RPMS 75% [=============== ] 2.8 MB/s | 10 MB 00:01 ETA Local RPMS 82% [================ ] 2.8 MB/s | 11 MB 00:00 ETA Local RPMS 88% [=================- ] 2.8 MB/s | 12 MB 00:00 ETA Local RPMS 95% [=================== ] 2.8 MB/s | 13 MB 00:00 ETA Local RPMS 2.3 MB/s | 14 MB 00:05 Last metadata expiration check: 0:01:44 ago on Thu Feb 22 14:50:34 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: automake noarch 1.15.1-3.fc28 local 706 k texinfo riscv64 6.5-1.fc28 local 1.2 M Installing dependencies: autoconf noarch 2.69-26.fc28 local 709 k emacs-filesystem noarch 1:25.3-5.fc28 local 67 k m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Class-Inspector noarch 1.32-1.fc27 local 35 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Text-Unidecode noarch 1.30-4.fc27 local 147 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-EastAsianWidth noarch 1.33-11.fc27 local 14 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libintl-perl riscv64 1.27-1.fc27 local 862 k perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k Installing weak dependencies: perl-File-ShareDir noarch 1.104-2.fc27 local 28 k Transaction Summary ================================================================================ Install 44 Packages Total download size: 19 M Installed size: 58 M Downloading Packages: (1/44): texinfo-6.5- 0% [ ] --- B/s | 0 B --:-- ETA (1/44): perl-Unicode-EastAsianWidth-1.33-11.fc2 491 kB/s | 14 kB 00:00 (2-3/44): perl-Text- 0% [ ] 585 kB/s | 46 kB 00:32 ETA (2/44): perl-Text-Unidecode-1.30-4.fc27.noarch. 622 kB/s | 147 kB 00:00 (3-4/44): perl-libin 2% [ ] 647 kB/s | 465 kB 00:28 ETA (3-5/44): automake-1 6% [= ] 781 kB/s | 1.3 MB 00:22 ETA (3-5/44): texinfo-6. 11% [== ] 900 kB/s | 2.1 MB 00:18 ETA (3/44): perl-libintl-perl-1.27-1.fc27.riscv64.r 850 kB/s | 862 kB 00:01 (4-5/44): texinfo-6. 13% [==- ] 945 kB/s | 2.5 MB 00:17 ETA (4/44): automake-1.15.1-3.fc28.noarch.rpm 763 kB/s | 706 kB 00:00 (5/44): texinfo-6.5- 13% [==- ] 945 kB/s | 2.5 MB 00:17 ETA (5/44): perl-Carp-1.42-408.fc27.0.riscv64.noarc 673 kB/s | 84 kB 00:00 (6-7/44): texinfo-6. 15% [=== ] 970 kB/s | 2.8 MB 00:16 ETA (6/44): perl-Exporter-5.72-408.fc27.0.riscv64.n 684 kB/s | 87 kB 00:00 (7/44): texinfo-6.5- 15% [=== ] 970 kB/s | 2.8 MB 00:16 ETA (7/44): perl-Getopt-Long-2.50-3.fc27.noarch.rpm 637 kB/s | 61 kB 00:00 (8-9/44): texinfo-6. 16% [=== ] 984 kB/s | 3.0 MB 00:16 ETA (8/44): texinfo-6.5-1.fc28.riscv64.rpm 658 kB/s | 1.2 MB 00:01 (9-10/44): perl-Data 18% [===- ] 1.0 MB/s | 3.4 MB 00:15 ETA (9/44): perl-Data-Dumper-2.167-408.fc27.0.riscv 449 kB/s | 149 kB 00:00 (10-11/44): perl-Enc 18% [===- ] 1.0 MB/s | 3.5 MB 00:15 ETA (10/44): perl-Pod-Simple-3.35-408.fc27.0.riscv6 489 kB/s | 271 kB 00:00 (11-12/44): perl-MIM 19% [===- ] 1.0 MB/s | 3.6 MB 00:15 ETA (11/44): perl-MIME-Base64-3.15-408.fc27.0.riscv 550 kB/s | 111 kB 00:00 (12-13/44): perl-Pat 20% [==== ] 1.0 MB/s | 3.8 MB 00:14 ETA (12/44): perl-PathTools-3.67-408.fc27.0.riscv64 679 kB/s | 166 kB 00:00 (13-14/44): perl-Sto 21% [==== ] 1.0 MB/s | 4.1 MB 00:14 ETA (13/44): perl-Storable-2.62-408.fc27.0.riscv64. 732 kB/s | 205 kB 00:00 (14-15/44): perl-Uni 23% [====- ] 1.1 MB/s | 4.4 MB 00:13 ETA (14/44): perl-Unicode-Normalize-1.25-408.fc27.0 665 kB/s | 164 kB 00:00 (15-16/44): perl-int 24% [====- ] 1.1 MB/s | 4.6 MB 00:13 ETA (15-17/44): perl-lib 28% [=====- ] 1.2 MB/s | 5.4 MB 00:11 ETA (15-17/44): perl-lib 33% [======- ] 1.3 MB/s | 6.3 MB 00:09 ETA (15-17/44): perl-lib 38% [=======- ] 1.4 MB/s | 7.3 MB 00:08 ETA (15/44): perl-Encode-2.94-16.fc27.riscv64.rpm 760 kB/s | 1.4 MB 00:01 (16-17/44): perl-lib 41% [======== ] 1.4 MB/s | 7.7 MB 00:07 ETA (16/44): perl-Errno-1.28-408.fc28.1.riscv64.ris 787 kB/s | 73 kB 00:00 (17-18/44): perl-lib 42% [========- ] 1.4 MB/s | 8.0 MB 00:07 ETA (17/44): perl-constant-1.33-408.fc27.0.riscv64. 843 kB/s | 79 kB 00:00 (18-19/44): perl-lib 43% [========- ] 1.4 MB/s | 8.2 MB 00:07 ETA (18/44): perl-IO-1.38-408.fc28.1.riscv64.riscv6 854 kB/s | 176 kB 00:00 (19-20/44): perl-lib 46% [========= ] 1.5 MB/s | 8.7 MB 00:06 ETA (19/44): perl-File-Path-2.15-1.fc27.noarch.rpm 621 kB/s | 37 kB 00:00 (20-21/44): perl-lib 47% [========= ] 1.5 MB/s | 8.9 MB 00:06 ETA (20/44): perl-Text-Tabs+Wrap-2013.0523-408.fc27 832 kB/s | 80 kB 00:00 (21-22/44): perl-lib 48% [=========- ] 1.5 MB/s | 9.1 MB 00:06 ETA (21/44): perl-parent-0.236-408.fc27.0.riscv64.n 760 kB/s | 71 kB 00:00 (22-23/44): perl-lib 49% [=========- ] 1.5 MB/s | 9.3 MB 00:06 ETA (22/44): perl-Scalar-List-Utils-1.48-1.fc27.ris 804 kB/s | 119 kB 00:00 (23-24/44): perl-int 51% [========== ] 1.5 MB/s | 9.7 MB 00:05 ETA (23/44): perl-macros-5.26.1-408.fc28.1.riscv64. 715 kB/s | 69 kB 00:00 (24-25/44): perl-int 53% [==========- ] 1.5 MB/s | 9.9 MB 00:05 ETA (24/44): perl-threads-2.21-1.fc27.riscv64.rpm 826 kB/s | 104 kB 00:00 (25-26/44): perl-int 54% [==========- ] 1.5 MB/s | 10 MB 00:05 ETA (25/44): perl-threads-shared-1.58-1.fc27.riscv6 834 kB/s | 91 kB 00:00 (26-27/44): perl-int 56% [=========== ] 1.5 MB/s | 11 MB 00:05 ETA (26/44): perl-Socket-2.027-1.fc27.riscv64.rpm 839 kB/s | 95 kB 00:00 (27-28/44): perl-int 57% [===========- ] 1.6 MB/s | 11 MB 00:05 ETA (27/44): perl-Pod-Escapes-1.07-408.fc27.0.riscv 818 kB/s | 77 kB 00:00 (28-29/44): perl-int 58% [===========- ] 1.6 MB/s | 11 MB 00:04 ETA (28/44): perl-Pod-Usage-1.69-408.fc27.0.riscv64 737 kB/s | 89 kB 00:00 (29-30/44): perl-int 60% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (29/44): perl-Text-ParseWords-3.30-408.fc27.0.r 790 kB/s | 73 kB 00:00 (30-31/44): perl-int 61% [============ ] 1.6 MB/s | 12 MB 00:04 ETA (30-32/44): autoconf 65% [============= ] 1.7 MB/s | 12 MB 00:03 ETA (30-32/44): autoconf 70% [============== ] 1.7 MB/s | 13 MB 00:03 ETA (30/44): autoconf-2.69-26.fc28.noarch.rpm 860 kB/s | 709 kB 00:00 (31-32/44): perl-lib 72% [==============- ] 1.7 MB/s | 14 MB 00:02 ETA (31/44): emacs-filesystem-25.3-5.fc28.noarch.rp 688 kB/s | 67 kB 00:00 (32-33/44): perl-lib 74% [==============- ] 1.7 MB/s | 14 MB 00:02 ETA (32/44): perl-Thread-Queue-3.12-408.fc27.0.risc 784 kB/s | 77 kB 00:00 (33-34/44): perl-int 75% [=============== ] 1.7 MB/s | 14 MB 00:02 ETA (33/44): perl-libs-5.26.1-408.fc28.1.riscv64.ri 711 kB/s | 3.3 MB 00:04 (34-35/44): perl-int 76% [=============== ] 1.6 MB/s | 14 MB 00:02 ETA (34/44): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 895 kB/s | 139 kB 00:00 (35-36/44): perl-int 79% [===============- ] 1.6 MB/s | 15 MB 00:02 ETA (35/44): m4-1.4.18-5.fc28.riscv64.rpm 420 kB/s | 369 kB 00:00 (36-37/44): perl-int 81% [================ ] 1.6 MB/s | 15 MB 00:02 ETA (36/44): perl-podlators-4.09-408.fc27.0.riscv64 607 kB/s | 157 kB 00:00 (37-38/44): perl-Fil 81% [================ ] 1.6 MB/s | 15 MB 00:02 ETA (37/44): perl-File-Temp-0.230.400-408.fc27.0.ri 569 kB/s | 103 kB 00:00 (38-39/44): perl-HTT 82% [================- ] 1.6 MB/s | 15 MB 00:01 ETA (38/44): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 552 kB/s | 97 kB 00:00 (39-40/44): perl-Tim 83% [================- ] 1.6 MB/s | 16 MB 00:01 ETA (39/44): perl-Time-Local-1.250-394.fc27.noarch. 401 kB/s | 30 kB 00:00 (40/44): perl-interp 83% [================- ] 1.6 MB/s | 16 MB 00:01 ETA (40/44): perl-Term-Cap-1.17-408.fc27.0.riscv64. 837 kB/s | 78 kB 00:00 (41-42/44): perl-Ter 84% [================- ] 1.6 MB/s | 16 MB 00:01 ETA (41/44): perl-Term-ANSIColor-4.06-408.fc27.0.ri 557 kB/s | 94 kB 00:00 (42-43/44): perl-Fil 84% [================- ] 1.6 MB/s | 16 MB 00:01 ETA (42/44): perl-File-ShareDir-1.104-2.fc27.noarch 315 kB/s | 28 kB 00:00 (43-44/44): perl-Cla 84% [================- ] 1.6 MB/s | 16 MB 00:01 ETA (43/44): perl-Class-Inspector-1.32-1.fc27.noarc 523 kB/s | 35 kB 00:00 (44/44): perl-interp 85% [================= ] 1.6 MB/s | 16 MB 00:01 ETA (44/44): perl-interp 89% [=================- ] 1.7 MB/s | 17 MB 00:01 ETA (44/44): perl-interp 94% [==================- ] 1.7 MB/s | 18 MB 00:00 ETA (44/44): perl-interp 98% [===================-] 1.8 MB/s | 18 MB 00:00 ETA (44/44): perl-interpreter-5.26.1-408.fc28.1.ris 899 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 19 MB 00:10 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/44 Installing : perl-Exporter-5.72-408.f [===== ] 1/44 Installing : perl-Exporter-5.72-408.f [======= ] 1/44 Installing : perl-Exporter-5.72-408.f [==================== ] 1/44 Installing : perl-Exporter-5.72-408.f [======================== ] 1/44 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/44 Installing : perl-libs-4:5.26.1-408.f [ ] 2/44 Installing : perl-libs-4:5.26.1-408.f [= ] 2/44 Installing : perl-libs-4:5.26.1-408.f [== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/44 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/44 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/44 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/44 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/44 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/44 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/44 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/44 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/44 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/44 Installing : perl-Carp-1.42-408.fc27. [ ] 3/44 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/44 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/44 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/44 Installing : perl-Scalar-List-Utils-3 [ ] 4/44 Installing : perl-Scalar-List-Utils-3 [= ] 4/44 Installing : perl-Scalar-List-Utils-3 [== ] 4/44 Installing : perl-Scalar-List-Utils-3 [=== ] 4/44 Installing : perl-Scalar-List-Utils-3 [===== ] 4/44 Installing : perl-Scalar-List-Utils-3 [======== ] 4/44 Installing : perl-Scalar-List-Utils-3 [========== ] 4/44 Installing : perl-Scalar-List-Utils-3 [============= ] 4/44 Installing : perl-Scalar-List-Utils-3 [================ ] 4/44 Installing : perl-Scalar-List-Utils-3 [================== ] 4/44 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/44 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/44 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/44 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/44 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/44 Installing : perl-Text-ParseWords-3.3 [ ] 5/44 Installing : perl-Text-ParseWords-3.3 [======= ] 5/44 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/44 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/44 Installing : perl-Term-ANSIColor-4.06 [ ] 6/44 Installing : perl-Term-ANSIColor-4.06 [==== ] 6/44 Installing : perl-Term-ANSIColor-4.06 [================== ] 6/44 Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/44 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/44 Installing : perl-macros-4:5.26.1-408 [ ] 7/44 Installing : perl-macros-4:5.26.1-408 [======================== ] 7/44 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/44 Installing : perl-Unicode-Normalize-1 [ ] 8/44 Installing : perl-Unicode-Normalize-1 [= ] 8/44 Installing : perl-Unicode-Normalize-1 [== ] 8/44 Installing : perl-Unicode-Normalize-1 [=== ] 8/44 Installing : perl-Unicode-Normalize-1 [==== ] 8/44 Installing : perl-Unicode-Normalize-1 [===== ] 8/44 Installing : perl-Unicode-Normalize-1 [====== ] 8/44 Installing : perl-Unicode-Normalize-1 [======= ] 8/44 Installing : perl-Unicode-Normalize-1 [======== ] 8/44 Installing : perl-Unicode-Normalize-1 [========= ] 8/44 Installing : perl-Unicode-Normalize-1 [========== ] 8/44 Installing : perl-Unicode-Normalize-1 [============ ] 8/44 Installing : perl-Unicode-Normalize-1 [============= ] 8/44 Installing : perl-Unicode-Normalize-1 [============== ] 8/44 Installing : perl-Unicode-Normalize-1 [=============== ] 8/44 Installing : perl-Unicode-Normalize-1 [================ ] 8/44 Installing : perl-Unicode-Normalize-1 [================= ] 8/44 Installing : perl-Unicode-Normalize-1 [================== ] 8/44 Installing : perl-Unicode-Normalize-1 [=================== ] 8/44 Installing : perl-Unicode-Normalize-1 [==================== ] 8/44 Installing : perl-Unicode-Normalize-1 [===================== ] 8/44 Installing : perl-Unicode-Normalize-1 [====================== ] 8/44 Installing : perl-Unicode-Normalize-1 [======================= ] 8/44 Installing : perl-Unicode-Normalize-1 [======================== ] 8/44 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 8/44 Installing : perl-Errno-1.28-408.fc28 [ ] 9/44 Installing : perl-Errno-1.28-408.fc28 [================= ] 9/44 Installing : perl-Errno-1.28-408.fc28 [======================== ] 9/44 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 9/44 Installing : perl-PathTools-3.67-408. [ ] 10/44 Installing : perl-PathTools-3.67-408. [== ] 10/44 Installing : perl-PathTools-3.67-408. [=== ] 10/44 Installing : perl-PathTools-3.67-408. [==== ] 10/44 Installing : perl-PathTools-3.67-408. [======= ] 10/44 Installing : perl-PathTools-3.67-408. [========= ] 10/44 Installing : perl-PathTools-3.67-408. [=========== ] 10/44 Installing : perl-PathTools-3.67-408. [============== ] 10/44 Installing : perl-PathTools-3.67-408. [================== ] 10/44 Installing : perl-PathTools-3.67-408. [==================== ] 10/44 Installing : perl-PathTools-3.67-408. [===================== ] 10/44 Installing : perl-PathTools-3.67-408. [====================== ] 10/44 Installing : perl-PathTools-3.67-408. [======================= ] 10/44 Installing : perl-PathTools-3.67-408. [======================== ] 10/44 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 10/44 Installing : perl-constant-1.33-408.f [ ] 11/44 Installing : perl-constant-1.33-408.f [======= ] 11/44 Installing : perl-constant-1.33-408.f [======================== ] 11/44 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 11/44 Installing : perl-File-Path-2.15-1.fc [ ] 12/44 Installing : perl-File-Path-2.15-1.fc [==== ] 12/44 Installing : perl-File-Path-2.15-1.fc [======== ] 12/44 Installing : perl-File-Path-2.15-1.fc [==================== ] 12/44 Installing : perl-File-Path-2.15-1.fc [======================== ] 12/44 Installing : perl-File-Path-2.15-1.fc27.noarch 12/44 Installing : perl-Text-Tabs+Wrap-2013 [ ] 13/44 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 13/44 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 13/44 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 13/44 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 13/44 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 13/44 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 13/44 Installing : perl-parent-1:0.236-408. [ ] 14/44 Installing : perl-parent-1:0.236-408. [============ ] 14/44 Installing : perl-parent-1:0.236-408. [======================== ] 14/44 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 14/44 Installing : perl-threads-shared-1.58 [ ] 15/44 Installing : perl-threads-shared-1.58 [=== ] 15/44 Installing : perl-threads-shared-1.58 [======= ] 15/44 Installing : perl-threads-shared-1.58 [========== ] 15/44 Installing : perl-threads-shared-1.58 [============== ] 15/44 Installing : perl-threads-shared-1.58 [================= ] 15/44 Installing : perl-threads-shared-1.58 [==================== ] 15/44 Installing : perl-threads-shared-1.58 [======================= ] 15/44 Installing : perl-threads-shared-1.58 [======================== ] 15/44 Installing : perl-threads-shared-1.58-1.fc27.riscv64 15/44 Installing : perl-threads-1:2.21-1.fc [ ] 16/44 Installing : perl-threads-1:2.21-1.fc [=== ] 16/44 Installing : perl-threads-1:2.21-1.fc [====== ] 16/44 Installing : perl-threads-1:2.21-1.fc [========= ] 16/44 Installing : perl-threads-1:2.21-1.fc [============= ] 16/44 Installing : perl-threads-1:2.21-1.fc [================ ] 16/44 Installing : perl-threads-1:2.21-1.fc [================== ] 16/44 Installing : perl-threads-1:2.21-1.fc [===================== ] 16/44 Installing : perl-threads-1:2.21-1.fc [====================== ] 16/44 Installing : perl-threads-1:2.21-1.fc [======================= ] 16/44 Installing : perl-threads-1:2.21-1.fc [======================== ] 16/44 Installing : perl-threads-1:2.21-1.fc27.riscv64 16/44 Installing : perl-interpreter-4:5.26. [ ] 17/44 Installing : perl-interpreter-4:5.26. [= ] 17/44random: crng init done Installing : perl-interpreter-4:5.26. [== ] 17/44 Installing : perl-interpreter-4:5.26. [=== ] 17/44 Installing : perl-interpreter-4:5.26. [==== ] 17/44 Installing : perl-interpreter-4:5.26. [===== ] 17/44 Installing : perl-interpreter-4:5.26. [====== ] 17/44 Installing : perl-interpreter-4:5.26. [======= ] 17/44 Installing : perl-interpreter-4:5.26. [======== ] 17/44 Installing : perl-interpreter-4:5.26. [========= ] 17/44 Installing : perl-interpreter-4:5.26. [========== ] 17/44 Installing : perl-interpreter-4:5.26. [=========== ] 17/44 Installing : perl-interpreter-4:5.26. [============ ] 17/44 Installing : perl-interpreter-4:5.26. [============= ] 17/44 Installing : perl-interpreter-4:5.26. [============== ] 17/44 Installing : perl-interpreter-4:5.26. [=============== ] 17/44 Installing : perl-interpreter-4:5.26. [================ ] 17/44 Installing : perl-interpreter-4:5.26. [================= ] 17/44 Installing : perl-interpreter-4:5.26. [================== ] 17/44 Installing : perl-interpreter-4:5.26. [=================== ] 17/44 Installing : perl-interpreter-4:5.26. [==================== ] 17/44 Installing : perl-interpreter-4:5.26. [===================== ] 17/44 Installing : perl-interpreter-4:5.26. [====================== ] 17/44 Installing : perl-interpreter-4:5.26. [======================= ] 17/44 Installing : perl-interpreter-4:5.26. [======================== ] 17/44 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/44 Installing : perl-Socket-4:2.027-1.fc [ ] 18/44 Installing : perl-Socket-4:2.027-1.fc [=== ] 18/44 Installing : perl-Socket-4:2.027-1.fc [======= ] 18/44 Installing : perl-Socket-4:2.027-1.fc [========== ] 18/44 Installing : perl-Socket-4:2.027-1.fc [============== ] 18/44 Installing : perl-Socket-4:2.027-1.fc [================= ] 18/44 Installing : perl-Socket-4:2.027-1.fc [==================== ] 18/44 Installing : perl-Socket-4:2.027-1.fc [===================== ] 18/44 Installing : perl-Socket-4:2.027-1.fc [====================== ] 18/44 Installing : perl-Socket-4:2.027-1.fc [======================= ] 18/44 Installing : perl-Socket-4:2.027-1.fc [======================== ] 18/44 Installing : perl-Socket-4:2.027-1.fc27.riscv64 18/44 Installing : perl-IO-1.38-408.fc28.1. [ ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [= ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [=== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [==== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [===== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [====== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [======= ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [======== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [============== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [================= ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 19/44 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 19/44 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/44 Installing : perl-Storable-1:2.62-408 [ ] 20/44 Installing : perl-Storable-1:2.62-408 [== ] 20/44 Installing : perl-Storable-1:2.62-408 [==== ] 20/44 Installing : perl-Storable-1:2.62-408 [====== ] 20/44 Installing : perl-Storable-1:2.62-408 [======== ] 20/44 Installing : perl-Storable-1:2.62-408 [========== ] 20/44 Installing : perl-Storable-1:2.62-408 [============ ] 20/44 Installing : perl-Storable-1:2.62-408 [============== ] 20/44 Installing : perl-Storable-1:2.62-408 [================ ] 20/44 Installing : perl-Storable-1:2.62-408 [================== ] 20/44 Installing : perl-Storable-1:2.62-408 [==================== ] 20/44 Installing : perl-Storable-1:2.62-408 [====================== ] 20/44 Installing : perl-Storable-1:2.62-408 [======================== ] 20/44 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 20/44 Installing : perl-MIME-Base64-3.15-40 [ ] 21/44 Installing : perl-MIME-Base64-3.15-40 [= ] 21/44 Installing : perl-MIME-Base64-3.15-40 [== ] 21/44 Installing : perl-MIME-Base64-3.15-40 [========== ] 21/44 Installing : perl-MIME-Base64-3.15-40 [================== ] 21/44 Installing : perl-MIME-Base64-3.15-40 [======================= ] 21/44 Installing : perl-MIME-Base64-3.15-40 [======================== ] 21/44 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 21/44 Installing : perl-Data-Dumper-2.167-4 [ ] 22/44 Installing : perl-Data-Dumper-2.167-4 [=== ] 22/44 Installing : perl-Data-Dumper-2.167-4 [==== ] 22/44 Installing : perl-Data-Dumper-2.167-4 [======== ] 22/44 Installing : perl-Data-Dumper-2.167-4 [============ ] 22/44 Installing : perl-Data-Dumper-2.167-4 [=============== ] 22/44 Installing : perl-Data-Dumper-2.167-4 [=================== ] 22/44 Installing : perl-Data-Dumper-2.167-4 [====================== ] 22/44 Installing : perl-Data-Dumper-2.167-4 [======================= ] 22/44 Installing : perl-Data-Dumper-2.167-4 [======================== ] 22/44 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 22/44 Installing : perl-File-Temp-0.230.400 [ ] 23/44 Installing : perl-File-Temp-0.230.400 [=== ] 23/44 Installing : perl-File-Temp-0.230.400 [============ ] 23/44 Installing : perl-File-Temp-0.230.400 [===================== ] 23/44 Installing : perl-File-Temp-0.230.400 [======================== ] 23/44 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 23/44 Installing : perl-Text-Unidecode-1.30 [ ] 24/44 Installing : perl-Text-Unidecode-1.30 [= ] 24/44 Installing : perl-Text-Unidecode-1.30 [== ] 24/44 Installing : perl-Text-Unidecode-1.30 [=== ] 24/44 Installing : perl-Text-Unidecode-1.30 [==== ] 24/44 Installing : perl-Text-Unidecode-1.30 [===== ] 24/44 Installing : perl-Text-Unidecode-1.30 [====== ] 24/44 Installing : perl-Text-Unidecode-1.30 [======= ] 24/44 Installing : perl-Text-Unidecode-1.30 [======== ] 24/44 Installing : perl-Text-Unidecode-1.30 [========= ] 24/44 Installing : perl-Text-Unidecode-1.30 [========== ] 24/44 Installing : perl-Text-Unidecode-1.30 [=========== ] 24/44 Installing : perl-Text-Unidecode-1.30 [============ ] 24/44 Installing : perl-Text-Unidecode-1.30 [============= ] 24/44 Installing : perl-Text-Unidecode-1.30 [============== ] 24/44 Installing : perl-Text-Unidecode-1.30 [=============== ] 24/44 Installing : perl-Text-Unidecode-1.30 [================ ] 24/44 Installing : perl-Text-Unidecode-1.30 [================= ] 24/44 Installing : perl-Text-Unidecode-1.30 [================== ] 24/44 Installing : perl-Text-Unidecode-1.30 [=================== ] 24/44 Installing : perl-Text-Unidecode-1.30 [==================== ] 24/44 Installing : perl-Text-Unidecode-1.30 [===================== ] 24/44 Installing : perl-Text-Unidecode-1.30 [====================== ] 24/44 Installing : perl-Text-Unidecode-1.30 [======================= ] 24/44 Installing : perl-Text-Unidecode-1.30 [======================== ] 24/44 Installing : perl-Text-Unidecode-1.30-4.fc27.noarch 24/44 Installing : perl-Unicode-EastAsianWi [ ] 25/44 Installing : perl-Unicode-EastAsianWi [=== ] 25/44 Installing : perl-Unicode-EastAsianWi [======== ] 25/44 Installing : perl-Unicode-EastAsianWi [============ ] 25/44 Installing : perl-Unicode-EastAsianWi [======================== ] 25/44 Installing : perl-Unicode-EastAsianWidth-1.33-11.fc27.noarch 25/44 Installing : perl-Pod-Escapes-1:1.07- [ ] 26/44 Installing : perl-Pod-Escapes-1:1.07- [==== ] 26/44 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 26/44 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 26/44 Installing : perl-Term-Cap-1.17-408.f [ ] 27/44 Installing : perl-Term-Cap-1.17-408.f [==== ] 27/44 Installing : perl-Term-Cap-1.17-408.f [======================== ] 27/44 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 27/44 Installing : perl-Thread-Queue-3.12-4 [ ] 28/44 Installing : perl-Thread-Queue-3.12-4 [===== ] 28/44 Installing : perl-Thread-Queue-3.12-4 [====== ] 28/44 Installing : perl-Thread-Queue-3.12-4 [======================== ] 28/44 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 28/44 Installing : perl-Time-Local-1:1.250- [ ] 29/44 Installing : perl-Time-Local-1:1.250- [= ] 29/44 Installing : perl-Time-Local-1:1.250- [===== ] 29/44 Installing : perl-Time-Local-1:1.250- [======== ] 29/44 Installing : perl-Time-Local-1:1.250- [========= ] 29/44 Installing : perl-Time-Local-1:1.250- [================= ] 29/44 Installing : perl-Time-Local-1:1.250- [=================== ] 29/44 Installing : perl-Time-Local-1:1.250- [======================== ] 29/44 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 29/44 Installing : perl-HTTP-Tiny-0.070-408 [ ] 30/44 Installing : perl-HTTP-Tiny-0.070-408 [== ] 30/44 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 30/44 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 30/44 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 30/44 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 30/44 Installing : perl-Pod-Simple-1:3.35-4 [ ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [= ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 31/44 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 31/44 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 31/44 Installing : perl-Encode-4:2.94-16.fc [ ] 32/44 Installing : perl-Encode-4:2.94-16.fc [= ] 32/44 Installing : perl-Encode-4:2.94-16.fc [== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [=== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [==== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [===== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [====== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [======= ] 32/44 Installing : perl-Encode-4:2.94-16.fc [======== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [========= ] 32/44 Installing : perl-Encode-4:2.94-16.fc [========== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [=========== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [============ ] 32/44 Installing : perl-Encode-4:2.94-16.fc [============= ] 32/44 Installing : perl-Encode-4:2.94-16.fc [============== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [=============== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [================ ] 32/44 Installing : perl-Encode-4:2.94-16.fc [================= ] 32/44 Installing : perl-Encode-4:2.94-16.fc [================== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [=================== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [==================== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [===================== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [====================== ] 32/44 Installing : perl-Encode-4:2.94-16.fc [======================= ] 32/44 Installing : perl-Encode-4:2.94-16.fc [======================== ] 32/44 Installing : perl-Encode-4:2.94-16.fc27.riscv64 32/44 Installing : perl-Getopt-Long-1:2.50- [ ] 33/44 Installing : perl-Getopt-Long-1:2.50- [=== ] 33/44 Installing : perl-Getopt-Long-1:2.50- [==== ] 33/44 Installing : perl-Getopt-Long-1:2.50- [===== ] 33/44 Installing : perl-Getopt-Long-1:2.50- [====== ] 33/44 Installing : perl-Getopt-Long-1:2.50- [======= ] 33/44 Installing : perl-Getopt-Long-1:2.50- [========= ] 33/44 Installing : perl-Getopt-Long-1:2.50- [=============== ] 33/44 Installing : perl-Getopt-Long-1:2.50- [===================== ] 33/44 Installing : perl-Getopt-Long-1:2.50- [======================== ] 33/44 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 33/44 Installing : perl-Pod-Usage-4:1.69-40 [ ] 34/44 Installing : perl-Pod-Usage-4:1.69-40 [== ] 34/44 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 34/44 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 34/44 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 34/44 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 34/44 Installing : perl-podlators-4.09-408. [ ] 35/44 Installing : perl-podlators-4.09-408. [= ] 35/44 Installing : perl-podlators-4.09-408. [== ] 35/44 Installing : perl-podlators-4.09-408. [=== ] 35/44 Installing : perl-podlators-4.09-408. [==== ] 35/44 Installing : perl-podlators-4.09-408. [===== ] 35/44 Installing : perl-podlators-4.09-408. [====== ] 35/44 Installing : perl-podlators-4.09-408. [======= ] 35/44 Installing : perl-podlators-4.09-408. [=========== ] 35/44 Installing : perl-podlators-4.09-408. [=============== ] 35/44 Installing : perl-podlators-4.09-408. [================ ] 35/44 Installing : perl-podlators-4.09-408. [================= ] 35/44 Installing : perl-podlators-4.09-408. [===================== ] 35/44 Installing : perl-podlators-4.09-408. [====================== ] 35/44 Installing : perl-podlators-4.09-408. [======================= ] 35/44 Installing : perl-podlators-4.09-408. [======================== ] 35/44 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 35/44 Installing : perl-Pod-Perldoc-3.28-40 [ ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [= ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 36/44 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 36/44 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 36/44 Installing : perl-libintl-perl-1.27-1 [ ] 37/44 Installing : perl-libintl-perl-1.27-1 [= ] 37/44 Installing : perl-libintl-perl-1.27-1 [== ] 37/44 Installing : perl-libintl-perl-1.27-1 [=== ] 37/44 Installing : perl-libintl-perl-1.27-1 [==== ] 37/44 Installing : perl-libintl-perl-1.27-1 [===== ] 37/44 Installing : perl-libintl-perl-1.27-1 [====== ] 37/44 Installing : perl-libintl-perl-1.27-1 [======= ] 37/44 Installing : perl-libintl-perl-1.27-1 [======== ] 37/44 Installing : perl-libintl-perl-1.27-1 [========= ] 37/44 Installing : perl-libintl-perl-1.27-1 [========== ] 37/44 Installing : perl-libintl-perl-1.27-1 [=========== ] 37/44 Installing : perl-libintl-perl-1.27-1 [============ ] 37/44 Installing : perl-libintl-perl-1.27-1 [============= ] 37/44 Installing : perl-libintl-perl-1.27-1 [============== ] 37/44 Installing : perl-libintl-perl-1.27-1 [=============== ] 37/44 Installing : perl-libintl-perl-1.27-1 [================ ] 37/44 Installing : perl-libintl-perl-1.27-1 [================= ] 37/44 Installing : perl-libintl-perl-1.27-1 [================== ] 37/44 Installing : perl-libintl-perl-1.27-1 [=================== ] 37/44 Installing : perl-libintl-perl-1.27-1 [==================== ] 37/44 Installing : perl-libintl-perl-1.27-1 [===================== ] 37/44 Installing : perl-libintl-perl-1.27-1 [====================== ] 37/44 Installing : perl-libintl-perl-1.27-1 [======================= ] 37/44 Installing : perl-libintl-perl-1.27-1 [======================== ] 37/44 Installing : perl-libintl-perl-1.27-1.fc27.riscv64 37/44 Installing : perl-Class-Inspector-1.3 [ ] 38/44 Installing : perl-Class-Inspector-1.3 [== ] 38/44 Installing : perl-Class-Inspector-1.3 [===== ] 38/44 Installing : perl-Class-Inspector-1.3 [============= ] 38/44 Installing : perl-Class-Inspector-1.3 [=============== ] 38/44 Installing : perl-Class-Inspector-1.3 [================ ] 38/44 Installing : perl-Class-Inspector-1.3 [======================= ] 38/44 Installing : perl-Class-Inspector-1.3 [======================== ] 38/44 Installing : perl-Class-Inspector-1.32-1.fc27.noarch 38/44 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 39/44 Installing : m4-1.4.18-5.fc28.riscv64 39/44 Running scriptlet: m4-1.4.18-5.fc28.riscv64 39/44 Installing : emacs-filesystem-1:25.3- [ ] 40/44 Installing : emacs-filesystem-1:25.3- [===== ] 40/44 Installing : emacs-filesystem-1:25.3- [============ ] 40/44 Installing : emacs-filesystem-1:25.3- [=================== ] 40/44 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 40/44 Installing : autoconf-2.69-26.fc28.no [ ] 41/44 Installing : autoconf-2.69-26.fc28.no [= ] 41/44 Installing : autoconf-2.69-26.fc28.no [== ] 41/44 Installing : autoconf-2.69-26.fc28.no [=== ] 41/44 Installing : autoconf-2.69-26.fc28.no [==== ] 41/44 Installing : autoconf-2.69-26.fc28.no [===== ] 41/44 Installing : autoconf-2.69-26.fc28.no [====== ] 41/44 Installing : autoconf-2.69-26.fc28.no [======= ] 41/44 Installing : autoconf-2.69-26.fc28.no [======== ] 41/44 Installing : autoconf-2.69-26.fc28.no [========= ] 41/44 Installing : autoconf-2.69-26.fc28.no [========== ] 41/44 Installing : autoconf-2.69-26.fc28.no [=========== ] 41/44 Installing : autoconf-2.69-26.fc28.no [============ ] 41/44 Installing : autoconf-2.69-26.fc28.no [============= ] 41/44 Installing : autoconf-2.69-26.fc28.no [============== ] 41/44 Installing : autoconf-2.69-26.fc28.no [=============== ] 41/44 Installing : autoconf-2.69-26.fc28.no [================ ] 41/44 Installing : autoconf-2.69-26.fc28.no [================= ] 41/44 Installing : autoconf-2.69-26.fc28.no [================== ] 41/44 Installing : autoconf-2.69-26.fc28.no [=================== ] 41/44 Installing : autoconf-2.69-26.fc28.no [==================== ] 41/44 Installing : autoconf-2.69-26.fc28.no [===================== ] 41/44 Installing : autoconf-2.69-26.fc28.no [====================== ] 41/44 Installing : autoconf-2.69-26.fc28.no [======================= ] 41/44 Installing : autoconf-2.69-26.fc28.no [======================== ] 41/44 Installing : autoconf-2.69-26.fc28.noarch 41/44 Running scriptlet: autoconf-2.69-26.fc28.noarch 41/44 Installing : automake-1.15.1-3.fc28.n [ ] 42/44 Installing : automake-1.15.1-3.fc28.n [= ] 42/44 Installing : automake-1.15.1-3.fc28.n [== ] 42/44 Installing : automake-1.15.1-3.fc28.n [=== ] 42/44 Installing : automake-1.15.1-3.fc28.n [==== ] 42/44 Installing : automake-1.15.1-3.fc28.n [===== ] 42/44 Installing : automake-1.15.1-3.fc28.n [====== ] 42/44 Installing : automake-1.15.1-3.fc28.n [======= ] 42/44 Installing : automake-1.15.1-3.fc28.n [======== ] 42/44 Installing : automake-1.15.1-3.fc28.n [========= ] 42/44 Installing : automake-1.15.1-3.fc28.n [========== ] 42/44 Installing : automake-1.15.1-3.fc28.n [=========== ] 42/44 Installing : automake-1.15.1-3.fc28.n [============ ] 42/44 Installing : automake-1.15.1-3.fc28.n [============= ] 42/44 Installing : automake-1.15.1-3.fc28.n [============== ] 42/44 Installing : automake-1.15.1-3.fc28.n [=============== ] 42/44 Installing : automake-1.15.1-3.fc28.n [================ ] 42/44 Installing : automake-1.15.1-3.fc28.n [================= ] 42/44 Installing : automake-1.15.1-3.fc28.n [================== ] 42/44 Installing : automake-1.15.1-3.fc28.n [=================== ] 42/44 Installing : automake-1.15.1-3.fc28.n [==================== ] 42/44 Installing : automake-1.15.1-3.fc28.n [===================== ] 42/44 Installing : automake-1.15.1-3.fc28.n [====================== ] 42/44 Installing : automake-1.15.1-3.fc28.n [======================= ] 42/44 Installing : automake-1.15.1-3.fc28.n [======================== ] 42/44 Installing : automake-1.15.1-3.fc28.noarch 42/44 Running scriptlet: automake-1.15.1-3.fc28.noarch 42/44 Installing : perl-File-ShareDir-1.104 [ ] 43/44 Installing : perl-File-ShareDir-1.104 [= ] 43/44 Installing : perl-File-ShareDir-1.104 [==== ] 43/44 Installing : perl-File-ShareDir-1.104 [===== ] 43/44 Installing : perl-File-ShareDir-1.104 [============== ] 43/44 Installing : perl-File-ShareDir-1.104 [================ ] 43/44 Installing : perl-File-ShareDir-1.104 [======================= ] 43/44 Installing : perl-File-ShareDir-1.104 [======================== ] 43/44 Installing : perl-File-ShareDir-1.104-2.fc27.noarch 43/44 Installing : texinfo-6.5-1.fc28.riscv [ ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [= ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [=== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [==== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [===== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [====== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [======= ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [======== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [========= ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [========== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [=========== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [============ ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [============= ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [============== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [=============== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [================ ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [================= ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [================== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [=================== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [==================== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [===================== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [====================== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [======================= ] 44/44 Installing : texinfo-6.5-1.fc28.riscv [======================== ] 44/44 Installing : texinfo-6.5-1.fc28.riscv64 44/44 Running scriptlet: texinfo-6.5-1.fc28.riscv64 44/44 Verifying : texinfo-6.5-1.fc28.riscv64 1/44 Verifying : perl-Text-Unidecode-1.30-4.fc27.noarch 2/44 Verifying : perl-Unicode-EastAsianWidth-1.33-11.fc27.noarch 3/44 Verifying : perl-libintl-perl-1.27-1.fc27.riscv64 4/44 Verifying : automake-1.15.1-3.fc28.noarch 5/44 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 6/44 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 7/44 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 8/44 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 9/44 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 10/44 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 11/44 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 12/44 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 13/44 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 14/44 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 15/44 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 16/44 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 17/44 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 18/44 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 19/44 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 20/44 Verifying : perl-File-Path-2.15-1.fc27.noarch 21/44 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 22/44 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 23/44 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 24/44 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 25/44 Verifying : perl-threads-1:2.21-1.fc27.riscv64 26/44 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 27/44 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 28/44 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 29/44 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 30/44 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 31/44 Verifying : autoconf-2.69-26.fc28.noarch 32/44 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 33/44 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 34/44 Verifying : m4-1.4.18-5.fc28.riscv64 35/44 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 36/44 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 37/44 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 38/44 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 39/44 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 40/44 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 41/44 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 42/44 Verifying : perl-File-ShareDir-1.104-2.fc27.noarch 43/44 Verifying : perl-Class-Inspector-1.32-1.fc27.noarch 44/44 Installed: automake.noarch 1.15.1-3.fc28 texinfo.riscv64 6.5-1.fc28 perl-File-ShareDir.noarch 1.104-2.fc27 autoconf.noarch 2.69-26.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Class-Inspector.noarch 1.32-1.fc27 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Text-Unidecode.noarch 1.30-4.fc27 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-EastAsianWidth.noarch 1.33-11.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libintl-perl.riscv64 1.27-1.fc27 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 Complete! + dnf -y update --best Last metadata expiration check: 0:04:46 ago on Thu Feb 22 14:50:34 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:05:06 ago on Thu Feb 22 14:50:34 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group tar cpio util-linux grep which coreutils findutils gzip shadow-utils unzip xz bzip2 rpm-build info bash make diffutils fedora-release redhat-rpm-config sed gawk patch ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 31 Packages Total download size: 13 M Installed size: 50 M Downloading Packages: (1/31): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/31): make-4.2.1 5% [= ] 2.4 MB/s | 751 kB 00:04 ETA (1/31): make-4.2.1-6.fc27.riscv64.rpm 915 kB/s | 486 kB 00:00 (2-3/31): diffutils- 11% [== ] 2.4 MB/s | 1.4 MB 00:04 ETA (2/31): redhat-rpm-config-96-1.fc28.0.riscv64.n 832 kB/s | 75 kB 00:00 (3-4/31): diffutils- 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (3/31): diffutils-3.6-3.fc28.riscv64.rpm 732 kB/s | 577 kB 00:00 (4-5/31): nim-srpm-m 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (4/31): nim-srpm-macros-1-1.fc28.noarch.rpm 72 kB/s | 7.6 kB 00:00 (5/31): tar-1.29-7.f 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (5/31): ocaml-srpm-macros-5-2.fc27.noarch.rpm 178 kB/s | 7.8 kB 00:00 (6-7/31): openblas-s 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (6/31): openblas-srpm-macros-2-2.fc27.noarch.rp 159 kB/s | 6.6 kB 00:00 (7/31): tar-1.29-7.f 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (7/31): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 201 kB/s | 9.0 kB 00:00 (8-9/31): tar-1.29-7 13% [==- ] 2.3 MB/s | 1.8 MB 00:04 ETA (8/31): rust-srpm-macros-5-1.fc28.noarch.rpm 185 kB/s | 8.0 kB 00:00 (9/31): tar-1.29-7.f 13% [==- ] 2.3 MB/s | 1.8 MB 00:04 ETA (9/31): tar-1.29-7.fc27.riscv64.rpm 602 kB/s | 805 kB 00:01 (10-11/31): rpm-buil 18% [===- ] 2.3 MB/s | 2.3 MB 00:04 ETA (10/31): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 586 kB/s | 235 kB 00:00 (11-12/31): zstd-1.3 19% [===- ] 2.3 MB/s | 2.4 MB 00:04 ETA (11/31): which-2.21-4.fc28.riscv64.rpm 412 kB/s | 65 kB 00:00 (12-13/31): zstd-1.3 20% [==== ] 2.2 MB/s | 2.5 MB 00:04 ETA (12/31): patch-2.7.5-6.fc27.riscv64.rpm 791 kB/s | 270 kB 00:00 (13-14/31): zstd-1.3 25% [===== ] 2.3 MB/s | 3.2 MB 00:04 ETA (13/31): unzip-6.0-36.fc28.riscv64.rpm 812 kB/s | 398 kB 00:00 (14-15/31): xz-5.2.3 29% [=====- ] 2.2 MB/s | 3.7 MB 00:03 ETA (14/31): xz-5.2.3-5.fc28.riscv64.rpm 672 kB/s | 212 kB 00:00 (15-16/31): bzip2-1. 30% [====== ] 2.2 MB/s | 3.9 MB 00:03 ETA (15/31): bzip2-1.0.6-24.fc28.riscv64.rpm 483 kB/s | 81 kB 00:00 (16-17/31): elfutils 31% [====== ] 2.2 MB/s | 3.9 MB 00:03 ETA (16/31): file-5.32-3.fc28.riscv64.rpm 768 kB/s | 81 kB 00:00 (17-18/31): elfutils 33% [======- ] 2.2 MB/s | 4.2 MB 00:03 ETA (17-19/31): elfutils 40% [======== ] 2.2 MB/s | 5.1 MB 00:03 ETA (17/31): zstd-1.3.3-1.fc27.riscv64.rpm 663 kB/s | 1.1 MB 00:01 (18-19/31): binutils 40% [======== ] 2.2 MB/s | 5.1 MB 00:03 ETA (18/31): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 513 kB/s | 14 kB 00:00 (19-20/31): binutils 40% [======== ] 2.2 MB/s | 5.1 MB 00:03 ETA (19/31): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 587 kB/s | 15 kB 00:00 (20-21/31): binutils 41% [======== ] 2.2 MB/s | 5.2 MB 00:03 ETA (20/31): pkgconf-1.4.1-1.fc27.riscv64.rpm 610 kB/s | 35 kB 00:00 (21-22/31): elfutils 42% [======== ] 2.1 MB/s | 5.3 MB 00:03 ETA (21/31): libpkgconf-1.4.1-1.fc27.riscv64.rpm 764 kB/s | 74 kB 00:00 (22-23/31): elfutils 43% [========- ] 2.1 MB/s | 5.5 MB 00:03 ETA (22/31): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 309 kB/s | 7.5 kB 00:00 (23-24/31): elfutils 44% [========- ] 2.1 MB/s | 5.6 MB 00:03 ETA (23/31): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 330 kB/s | 8.2 kB 00:00 (24-25/31): elfutils 44% [========- ] 2.1 MB/s | 5.6 MB 00:03 ETA (24/31): gnat-srpm-macros-4-5.fc28.noarch.rpm 347 kB/s | 8.8 kB 00:00 (25-26/31): elfutils 44% [========- ] 2.1 MB/s | 5.7 MB 00:03 ETA (25/31): go-srpm-macros-2-11.fc28.noarch.rpm 327 kB/s | 8.4 kB 00:00 (26-27/31): elfutils 45% [========= ] 2.1 MB/s | 5.7 MB 00:03 ETA (26/31): perl-srpm-macros-1-26.fc28.noarch.rpm 391 kB/s | 9.7 kB 00:00 (27-28/31): elfutils 45% [========= ] 2.1 MB/s | 5.7 MB 00:03 ETA (27/31): python-srpm-macros-3-26.fc28.noarch.rp 414 kB/s | 10 kB 00:00 (28-29/31): elfutils 45% [========= ] 2.1 MB/s | 5.8 MB 00:03 ETA (28/31): elfutils-0.170-4.fc28.riscv64.rpm 545 kB/s | 791 kB 00:01 (29-30/31): binutils 48% [=========- ] 2.0 MB/s | 6.1 MB 00:03 ETA (29/31): dwz-0.12-5.fc28.riscv64.rpm 258 kB/s | 108 kB 00:00 (30/31): binutils-2. 48% [=========- ] 2.0 MB/s | 6.1 MB 00:03 ETA (30/31): zip-3.0-20.fc28.riscv64.rpm 1.2 MB/s | 271 kB 00:00 (31/31): binutils-2. 52% [==========- ] 2.0 MB/s | 6.6 MB 00:02 ETA (31/31): binutils-2. 59% [===========- ] 2.1 MB/s | 7.5 MB 00:02 ETA (31/31): binutils-2. 66% [============= ] 2.1 MB/s | 8.4 MB 00:01 ETA (31/31): binutils-2. 73% [==============- ] 2.2 MB/s | 9.3 MB 00:01 ETA (31/31): binutils-2. 80% [================ ] 2.2 MB/s | 10 MB 00:01 ETA (31/31): binutils-2. 87% [================= ] 2.3 MB/s | 11 MB 00:00 ETA (31/31): binutils-2. 94% [==================- ] 2.3 MB/s | 12 MB 00:00 ETA (31/31): binutils-2.30-1.fc28.riscv64.rpm 1.5 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.7 MB/s | 13 MB 00:07 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/31 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/31 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/31 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/31 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/31 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/31 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/31 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/31 Installing : file-5.32-3.fc28.riscv64 1/31 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/31 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/31 Installing : unzip-6.0-36.fc28.riscv64 2/31 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/31 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/31 Installing : zip-3.0-20.fc28.riscv64 3/31 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/31 Installing : dwz-0.12-5.fc28.riscv64 4/31 Installing : python-srpm-macros-3-26. [ ] 5/31 Installing : python-srpm-macros-3-26. [======================= ] 5/31 Installing : python-srpm-macros-3-26.fc28.noarch 5/31 Installing : perl-srpm-macros-1-26.fc [ ] 6/31 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/31 Installing : perl-srpm-macros-1-26.fc28.noarch 6/31 Installing : go-srpm-macros-2-11.fc28 [ ] 7/31 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/31 Installing : go-srpm-macros-2-11.fc28.noarch 7/31 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/31 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/31 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/31 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/31 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/31 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/31 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/31 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/31 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/31 Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/31 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/31 Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/31 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/31 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/31 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/31 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/31 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/31 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/31 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/31 Installing : pkgconf-1.4.1-1.fc27.riscv64 12/31 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/31 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/31 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/31 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/31 Installing : pkgconf-pkg-config-1.4.1 [ ] 14/31 Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/31 Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/31 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/31 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/31 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/31 Installing : binutils-2.30-1.fc28.ris [ ] 15/31 Installing : binutils-2.30-1.fc28.ris [= ] 15/31 Installing : binutils-2.30-1.fc28.ris [== ] 15/31 Installing : binutils-2.30-1.fc28.ris [=== ] 15/31 Installing : binutils-2.30-1.fc28.ris [==== ] 15/31 Installing : binutils-2.30-1.fc28.ris [===== ] 15/31 Installing : binutils-2.30-1.fc28.ris [====== ] 15/31 Installing : binutils-2.30-1.fc28.ris [======= ] 15/31 Installing : binutils-2.30-1.fc28.ris [======== ] 15/31 Installing : binutils-2.30-1.fc28.ris [========= ] 15/31 Installing : binutils-2.30-1.fc28.ris [========== ] 15/31 Installing : binutils-2.30-1.fc28.ris [=========== ] 15/31 Installing : binutils-2.30-1.fc28.ris [============ ] 15/31 Installing : binutils-2.30-1.fc28.ris [============= ] 15/31 Installing : binutils-2.30-1.fc28.ris [============== ] 15/31 Installing : binutils-2.30-1.fc28.ris [=============== ] 15/31 Installing : binutils-2.30-1.fc28.ris [================ ] 15/31 Installing : binutils-2.30-1.fc28.ris [================= ] 15/31 Installing : binutils-2.30-1.fc28.ris [================== ] 15/31 Installing : binutils-2.30-1.fc28.ris [=================== ] 15/31 Installing : binutils-2.30-1.fc28.ris [==================== ] 15/31 Installing : binutils-2.30-1.fc28.ris [===================== ] 15/31 Installing : binutils-2.30-1.fc28.ris [====================== ] 15/31 Installing : binutils-2.30-1.fc28.ris [======================= ] 15/31 Installing : binutils-2.30-1.fc28.ris [======================== ] 15/31 Installing : binutils-2.30-1.fc28.riscv64 15/31 Running scriptlet: binutils-2.30-1.fc28.riscv64 15/31 Installing : elfutils-0.170-4.fc28.ri [ ] 16/31 Installing : elfutils-0.170-4.fc28.ri [= ] 16/31 Installing : elfutils-0.170-4.fc28.ri [== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [=== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [==== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [===== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [====== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [======= ] 16/31 Installing : elfutils-0.170-4.fc28.ri [======== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [========= ] 16/31 Installing : elfutils-0.170-4.fc28.ri [========== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [=========== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [============ ] 16/31 Installing : elfutils-0.170-4.fc28.ri [============= ] 16/31 Installing : elfutils-0.170-4.fc28.ri [============== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [=============== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [================ ] 16/31 Installing : elfutils-0.170-4.fc28.ri [================= ] 16/31 Installing : elfutils-0.170-4.fc28.ri [================== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [=================== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [==================== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [===================== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [====================== ] 16/31 Installing : elfutils-0.170-4.fc28.ri [======================= ] 16/31 Installing : elfutils-0.170-4.fc28.ri [======================== ] 16/31 Installing : elfutils-0.170-4.fc28.riscv64 16/31 Installing : bzip2-1.0.6-24.fc28.risc [ ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 17/31 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 17/31 Installing : bzip2-1.0.6-24.fc28.riscv64 17/31 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 18/31 Installing : xz-5.2.3-5.fc28.riscv64 18/31 Installing : patch-2.7.5-6.fc27.riscv [ ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [= ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [=== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [==== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [===== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [====== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [======= ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [======== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [========= ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [========== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [============ ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [============= ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [============== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [================ ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [================= ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [================== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 19/31 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 19/31 Installing : patch-2.7.5-6.fc27.riscv64 19/31 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 20/31 Installing : zstd-1.3.3-1.fc27.riscv64 20/31 Installing : rust-srpm-macros-5-1.fc2 [ ] 21/31 Installing : rust-srpm-macros-5-1.fc2 [=== ] 21/31 Installing : rust-srpm-macros-5-1.fc2 [===== ] 21/31 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 21/31 Installing : rust-srpm-macros-5-1.fc28.noarch 21/31 Installing : qt5-srpm-macros-5.10.0-1 [ ] 22/31 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 22/31 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 22/31 Installing : openblas-srpm-macros-2-2 [ ] 23/31 Installing : openblas-srpm-macros-2-2 [================ ] 23/31 Installing : openblas-srpm-macros-2-2.fc27.noarch 23/31 Installing : ocaml-srpm-macros-5-2.fc [ ] 24/31 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 24/31 Installing : ocaml-srpm-macros-5-2.fc27.noarch 24/31 Installing : nim-srpm-macros-1-1.fc28 [ ] 25/31 Installing : nim-srpm-macros-1-1.fc28 [=== ] 25/31 Installing : nim-srpm-macros-1-1.fc28 [===== ] 25/31 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 25/31 Installing : nim-srpm-macros-1-1.fc28.noarch 25/31 Installing : redhat-rpm-config-96-1.f [ ] 26/31 Installing : redhat-rpm-config-96-1.f [== ] 26/31 Installing : redhat-rpm-config-96-1.f [=== ] 26/31 Installing : redhat-rpm-config-96-1.f [========= ] 26/31 Installing : redhat-rpm-config-96-1.f [=========== ] 26/31 Installing : redhat-rpm-config-96-1.f [================= ] 26/31 Installing : redhat-rpm-config-96-1.f [================== ] 26/31 Installing : redhat-rpm-config-96-1.f [=================== ] 26/31 Installing : redhat-rpm-config-96-1.f [===================== ] 26/31 Installing : redhat-rpm-config-96-1.f [====================== ] 26/31 Installing : redhat-rpm-config-96-1.f [======================== ] 26/31 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 26/31 Installing : diffutils-3.6-3.fc28.ris [ ] 27/31 Installing : diffutils-3.6-3.fc28.ris [= ] 27/31 Installing : diffutils-3.6-3.fc28.ris [== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [=== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [==== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [===== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [====== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [======= ] 27/31 Installing : diffutils-3.6-3.fc28.ris [======== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [========= ] 27/31 Installing : diffutils-3.6-3.fc28.ris [========== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [=========== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [============ ] 27/31 Installing : diffutils-3.6-3.fc28.ris [============= ] 27/31 Installing : diffutils-3.6-3.fc28.ris [============== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [=============== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [================ ] 27/31 Installing : diffutils-3.6-3.fc28.ris [================= ] 27/31 Installing : diffutils-3.6-3.fc28.ris [================== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [=================== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [==================== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [===================== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [====================== ] 27/31 Installing : diffutils-3.6-3.fc28.ris [======================= ] 27/31 Installing : diffutils-3.6-3.fc28.ris [======================== ] 27/31 Installing : diffutils-3.6-3.fc28.riscv64 27/31 Running scriptlet: diffutils-3.6-3.fc28.riscv64 27/31 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 28/31 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 28/31 Installing : tar-2:1.29-7.fc27.riscv64 28/31 Running scriptlet: tar-2:1.29-7.fc27.riscv64 28/31 Installing : rpm-build-4.14.1-6.fc28. [ ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [= ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [=== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [==== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [===== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [====== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [======= ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [======== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [========= ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [============ ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [============== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [================ ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [================= ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [================== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 29/31 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 29/31 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 29/31 Installing : which-2.21-4.fc28.riscv6 [ ] 30/31 Installing : which-2.21-4.fc28.riscv6 [===== ] 30/31 Installing : which-2.21-4.fc28.riscv6 [=========== ] 30/31 Installing : which-2.21-4.fc28.riscv6 [=============== ] 30/31 Installing : which-2.21-4.fc28.riscv6 [================ ] 30/31 Installing : which-2.21-4.fc28.riscv6 [================= ] 30/31 Installing : which-2.21-4.fc28.riscv6 [================== ] 30/31 Installing : which-2.21-4.fc28.riscv6 [======================== ] 30/31 Installing : which-2.21-4.fc28.riscv64 30/31 Running scriptlet: which-2.21-4.fc28.riscv64 30/31 Installing : make-1:4.2.1-6.fc27.risc [ ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [= ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [=== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [==== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [===== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [====== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [======= ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [======== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [========= ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [========== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [============ ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [============= ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [============== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [================ ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [================= ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [================== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 31/31 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 31/31 Installing : make-1:4.2.1-6.fc27.riscv64 31/31 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 31/31 Verifying : tar-2:1.29-7.fc27.riscv64 1/31 Verifying : diffutils-3.6-3.fc28.riscv64 2/31 Verifying : make-1:4.2.1-6.fc27.riscv64 3/31 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/31 Verifying : nim-srpm-macros-1-1.fc28.noarch 5/31 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/31 Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/31 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/31 Verifying : rust-srpm-macros-5-1.fc28.noarch 9/31 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/31 Verifying : zstd-1.3.3-1.fc27.riscv64 11/31 Verifying : which-2.21-4.fc28.riscv64 12/31 Verifying : patch-2.7.5-6.fc27.riscv64 13/31 Verifying : unzip-6.0-36.fc28.riscv64 14/31 Verifying : xz-5.2.3-5.fc28.riscv64 15/31 Verifying : bzip2-1.0.6-24.fc28.riscv64 16/31 Verifying : elfutils-0.170-4.fc28.riscv64 17/31 Verifying : file-5.32-3.fc28.riscv64 18/31 Verifying : binutils-2.30-1.fc28.riscv64 19/31 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 20/31 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 21/31 Verifying : pkgconf-1.4.1-1.fc27.riscv64 22/31 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 23/31 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 24/31 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 25/31 Verifying : gnat-srpm-macros-4-5.fc28.noarch 26/31 Verifying : go-srpm-macros-2-11.fc28.noarch 27/31 Verifying : perl-srpm-macros-1-26.fc28.noarch 28/31 Verifying : python-srpm-macros-3-26.fc28.noarch 29/31 Verifying : dwz-0.12-5.fc28.riscv64 30/31 Verifying : zip-3.0-20.fc28.riscv64 31/31 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:07:05 ago on Thu Feb 22 14:50:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 541 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 628 kB/s | 46 kB 00:04 ETA (2-4/4): kernel-head 36% [======= ] 770 kB/s | 942 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 823 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 820 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 87% [================= ] 950 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 946 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 956 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 973 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off