OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 13:22:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/ndisc6.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.IAGlW4 + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf ndisc6-1.0.3 + /usr/bin/bzip2 -dc /builddir/build/SOURCES/ndisc6-1.0.3.tar.bz2 + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd ndisc6-1.0.3 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (ndisc6-fix-dnssort.patch):' Patch #0 (ndisc6-fix-dnssort.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file src/dnssort.in + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.E4Y6A5 + umask 022 + cd /builddir/build/BUILD + cd ndisc6-1.0.3 + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./admin/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./admin/config.sub ++ basename ./admin/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./admin/config.sub '/usr/lib/rpm/redhat/config.sub' -> './admin/config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./admin/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./admin/config.guess ++ basename ./admin/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./admin/config.guess '/usr/lib/rpm/redhat/config.guess' -> './admin/config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-suid-install configure: checking system... checking for build hostname... stage4-builder configure: checking required programs... checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for gcc option to accept ISO C99... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking for perl... /usr/bin/perl checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes checking dependency style of gcc... none checking whether make supports nested variables... (cached) yes configure: checking required libraries... checking for clock_gettime in -lrt... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... no checking for gmsgfmt... : checking for xgettext... no checking for msgmerge... no checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc configure: checking header files... checking whether to enable assertions... yes configure: checking library functions... checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for library containing getopt_long... none required checking for clock_nanosleep... yes checking for fdatasync... yes checking for inet6_rth_add... yes checking for ppoll... yes checking for library containing socket... none required checking for library containing inet_ntop... none required configure: checking optional features... checking if installed programs should be setuid... no configure: writing results... checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating m4/Makefile config.status: creating po/Makefile.in config.status: creating doc/Makefile config.status: creating compat/Makefile config.status: creating src/Makefile config.status: creating rdnssd/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile + /usr/bin/make -O -j2 /usr/bin/make all-recursive Making all in po make[2]: Nothing to be done for 'all'. Making all in doc make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' SED rdnssd.8 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' Making all in compat make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' CC dummy.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' AR libcompat.a make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' Making all in src make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC addrinfo.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC tcpspray.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC tcptraceroute6-tcptraceroute.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC ndisc.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC rdisc6-ndisc.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC trace-tcp.o In file included from /usr/include/bits/libc-header-start.h:33:0, from /usr/include/string.h:26, from trace-tcp.c:27: /usr/include/features.h:184:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC trace-udp.o In file included from /usr/include/bits/libc-header-start.h:33:0, from /usr/include/string.h:26, from trace-udp.c:27: /usr/include/features.h:184:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC trace-icmp.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' ALIAS tcpspray6 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' SED dnssort make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' ALIAS addr2name make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' ALIAS tracert6 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CCLD tcpspray make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CCLD name2addr make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CCLD tcptraceroute6 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CCLD ndisc6 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CCLD rdisc6 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CC traceroute.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' CCLD rltraceroute6 make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' Making all in rdnssd make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' CC icmp.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' CC netlink.o make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' SED merge-hook make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' CC rdnssd.o rdnssd.c: In function 'parse_dnssl': rdnssd.c:300:9: warning: unused variable 'last_dom_len' [-Wunused-variable] size_t last_dom_len = 0; ^~~~~~~~~~~~ rdnssd.c: In function 'main': rdnssd.c:871:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write (pipefd, &val, sizeof (val)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rdnssd.c:873:3: warning: ignoring return value of 'freopen', declared with attribute warn_unused_result [-Wunused-result] freopen ("/dev/null", "r", stdin); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rdnssd.c:874:3: warning: ignoring return value of 'freopen', declared with attribute warn_unused_result [-Wunused-result] freopen ("/dev/null", "w", stdout); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rdnssd.c:875:3: warning: ignoring return value of 'freopen', declared with attribute warn_unused_result [-Wunused-result] freopen ("/dev/null", "w", stderr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rdnssd.c: In function 'worker': rdnssd.c:506:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write (pipe, &buf, sizeof(buf)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' CCLD rdnssd make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Ex2Ktg + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 + cd ndisc6-1.0.3 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 'INSTALL=/usr/bin/install -p' Making install in po make[1]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/po' installing cs.gmo as /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/locale/cs/LC_MESSAGES/ndisc6.mo installing de.gmo as /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/locale/de/LC_MESSAGES/ndisc6.mo installing en.gmo as /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/locale/en/LC_MESSAGES/ndisc6.mo installing en_GB.gmo as /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/locale/en_GB/LC_MESSAGES/ndisc6.mo installing fr.gmo as /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/locale/fr/LC_MESSAGES/ndisc6.mo if test "ndisc6" = "gettext-tools"; then \ /usr/bin/mkdir -p /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -p -m 644 ./$file \ /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/po' Making install in doc make[1]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' random: crng init done make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man1' /usr/bin/install -p -m 644 addr2name.1 dnssort.1 tcpspray.1 '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man8' /usr/bin/install -p -m 644 ndisc6.8 rdisc6.8 rltraceroute6.8 rdnssd.8 '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man8' /usr/bin/make install-data-hook make[3]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' inst=`echo rltraceroute6 | sed 's&^&&'`; \ cd "/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man8" && \ for a in tcptraceroute6 tracert6; do \ ln -sf -- "${inst}.8" "$a.8" ; \ done inst=`echo tcpspray | sed 's&^&&'`; \ cd "/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man1" && \ ln -sf -- "${inst}.1" "tcpspray6.1" inst=`echo addr2name | sed 's&^&&'`; \ cd "/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/man/man1" && \ ln -sf -- "${inst}.1" "name2addr.1" make[3]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' make[1]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/doc' Making install in compat make[1]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' make[1]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/compat' Making install in src make[1]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/bin' /usr/bin/install -p tcpspray name2addr '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/bin' /usr/bin/install -p tcpspray6 dnssort addr2name '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/install -p tcptraceroute6 '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/install -p tracert6 '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/install -p ndisc6 rdisc6 rltraceroute6 '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/make install-exec-hook make[3]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[3]: Nothing to be done for 'install-exec-hook'. make[3]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' make[1]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/src' Making install in rdnssd make[1]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/install -p rdnssd '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/sbin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/etc/rdnssd' /usr/bin/install -p merge-hook '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/etc/rdnssd' /usr/bin/make install-data-hook make[3]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' /bin/sh /builddir/build/BUILD/ndisc6-1.0.3/admin/install-sh -d -- /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/var/run/rdnssd chown -- nobody /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/var/run/rdnssd chown: changing ownership of '/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/var/run/rdnssd': Operation not permitted make[3]: [Makefile:698: install-data-hook] Error 1 (ignored) make[3]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[1]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3/rdnssd' make[1]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3' make[2]: Entering directory '/builddir/build/BUILD/ndisc6-1.0.3' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3' make[1]: Leaving directory '/builddir/build/BUILD/ndisc6-1.0.3' + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 ndisc6 + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in ./etc/rdnssd/merge-hook from #! /bin/sh to #!/bin/sh mangling shebang in ./usr/bin/addr2name from #! /bin/sh to #!/bin/sh mangling shebang in ./usr/bin/dnssort from #! /usr/bin/perl to #!/usr/bin/perl mangling shebang in ./usr/bin/tcpspray6 from #! /bin/sh to #!/bin/sh mangling shebang in ./usr/sbin/tracert6 from #! /bin/sh to #!/bin/sh Processing files: ndisc6-1.0.3-2.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.wWUf9J + umask 022 + cd /builddir/build/BUILD + cd ndisc6-1.0.3 + DOCDIR=/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/doc/ndisc6 + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/doc/ndisc6 + cp -pr README /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/doc/ndisc6 + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.mGy76n + umask 022 + cd /builddir/build/BUILD + cd ndisc6-1.0.3 + LICENSEDIR=/builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/licenses/ndisc6 + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/licenses/ndisc6 + cp -pr COPYING /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64/usr/share/licenses/ndisc6 + exit 0 Provides: ndisc6 = 1.0.3-2.fc28 ndisc6(riscv-64) = 1.0.3-2.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /bin/sh /usr/bin/perl ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) librt.so.1()(64bit) perl(Getopt::Std) perl(strict) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /builddir/build/SRPMS/ndisc6-1.0.3-2.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/ndisc6-1.0.3-2.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.XPl9cw + umask 022 + cd /builddir/build/BUILD + cd ndisc6-1.0.3 + /usr/bin/rm -rf /builddir/build/BUILDROOT/ndisc6-1.0.3-2.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off