---
title: "scDblFinder"
author:
- name: Pierre-Luc Germain
  affiliation: University and ETH Zürich
package: scDblFinder
output:
  BiocStyle::html_document
abstract: |
  An introduction to the scDblFinder method for fast and comprehensive doublet 
  identification in single-cell data.
vignette: |
  %\VignetteIndexEntry{2_scDblFinder}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r, include=FALSE}
library(BiocStyle)
```

# scDblFinder

The `scDblFinder` method combines the strengths of various doublet detection approaches, 
training an iterative classifier on the neighborhood of real cells and artificial doublets.

`scDblFinder()` has two main modes of operation: cluster-based or not.
Both perform quite well (see [Germain et al., 2021](https://f1000research.com/articles/10-979)).
In general, we recommend the cluster-based approach in datasets with a very clear cluster structure, and the random approach in more complex datasets.

## Installation

```{r, eval=FALSE}
if (!requireNamespace("BiocManager", quietly = TRUE))
    install.packages("BiocManager")
BiocManager::install("scDblFinder")

# or, to get that latest developments:
BiocManager::install("plger/scDblFinder")
```

## Usage

The input of `scDblFinder` is an object `sce` of class `r Biocpkg("SingleCellExperiment")` (empty drops having already been removed) containing at least the counts (assay 'counts'). Alternatively, a simple count matrix can also be provided.

Given an SCE object, `scDblFinder` (using the random approach) can be launched as follows :

```{r, warning=FALSE}
set.seed(123)
suppressPackageStartupMessages(library(scDblFinder))
# we create a dummy dataset; since it's small we set a higher doublet rate
sce <- mockDoubletSCE(dbl.rate=0.1, ngenes=300 )
# we run scDblFinder (providing the unusually high doublet rate)
sce <- scDblFinder(sce, dbr=0.1)
```

For 10x data, it is usually safe to leave the `dbr` empty, and it will be automatically estimated.

`scDblFinder` will add a number of columns to the colData of `sce` prefixed with 'scDblFinder', the most important of which are:

* `sce$scDblFinder.score` : the final doublet score
* `sce$scDblFinder.class` : the classification (doublet or singlet)

We can compare the calls with the truth in this toy example:

```{r}
table(truth=sce$type, call=sce$scDblFinder.class)
```

To use the *cluster-based* approach, one simply needs to additionally provide the `clusters` argument:

```{r}
sce <- scDblFinder(sce, clusters="cluster")
table(truth=sce$type, call=sce$scDblFinder.class)
```

The `clusters` argument can be either a vector of cluster labels for each column of `sce`, a colData column of `sce` containing such labels, or `TRUE`.
If `clusters=TRUE`, the fast clustering approach (see `?fastcluster`) will be employed.
If normalized expression (assay 'logcounts') and/or PCA (reducedDim 'PCA') are already present in the object, these will be used for the clustering step.

### Multiple samples

If you have multiple samples (understood as different cell captures), then it is
preferable to look for doublets separately for each sample (for multiplexed samples with cell hashes, 
this means for each batch). You can do this by simply providing a vector of the sample ids to the 
`samples` parameter of `scDblFinder` or, if these are stored in a column of `colData`, the name of the 
column. In this case, you might also consider multithreading it using the `BPPARAM` parameter (assuming you've got enough RAM!). 
For example:

```{r, eval=FALSE}
library(BiocParallel)
sce <- scDblFinder(sce, samples="sample_id", BPPARAM=MulticoreParam(3))
table(sce$scDblFinder.class)
```

Note that if you are running multiple samples using the cluster-based approach (see below), clustering will be performed sample-wise.
While this is typically not an issue for doublet identification, it means that the cluster labels (and putative origins of doublets) won't match between samples. If you are interested in these, it is preferable to first cluster (for example using `sce$cluster <- fastcluster(sce)`) and then provide the clusters to `scDblFinder`, which will ensure concordant labels across samples.

Of note, if you have very large differences in number of cells between samples the scores will not be directly comparable. We are working on improving this, but in the meantime it would be preferable to stratify similar samples and threshold the sets separately.

<br/><br/>

## Description of the method

Wrapped in the `scDblFinder` function are the following steps:

### Splitting captures

Doublets can only arise within a given sample or capture, and for this reason are better sought independently for each sample, which also speeds up the analysis. If the `samples` argument is given, `scDblFinder` will use it to split the cells into samples/captures, and process each of them in parallel if the `BPPARAM` argument is given. Depending on the `multiSampleMode` argument, the classifier can be trained globally, with thresholds optimized on a per-sample basis; however we did not see an improvement in doing so, and therefore by default each sample is treated separately to maximize robustness to technical differences.

If your samples are multiplexed, i.e. the different samples are mixed in different batches, then the batches should be what you provide to this argument.

### Reducing and clustering the data

The analysis can be considerably sped up, at little if any cost in accuracy, by reducing the dataset to only the top expressed genes (controlled by the `nfeatures` argument).

Then, depending on the `clusters` argument, an eventual PCA and clustering (using the internal `fastcluster` function) will be performed.
The rationale for the cluster-based approach is that homotypic doublets are nearly impossible to distinguish on the basis of their transcriptome, and therefore that creating that kind of doublets is a waste of computational resources that can moreover mislead the classifier into flagging singlets.
An alternative approach, however, is to generate doublets randomly (setting `clusters` to FALSE or NULL), and use the iterative approach (see below) to exclude also unidentifiable artificial doublets from the training.

### Generating artificial doublets

Depending on the `clusters` and `propRandom` arguments, artificial doublets will be generated by combining random cells and/or pairs of non-identical clusters (this can be performed manually using the `getArtificialDoublets` function). A proportion of the doublets will simply use the sum of counts of the composing cells, while the rest will undergo a library size adjustment and poisson resampling.

### Examining the k-nearest neighbors (kNN) of each cell

A new PCA is performed on the combination of real and artificial cells, from which a kNN network is generated. Using this kNN, a number of parameters are gathered for each cell, such as the proportion of doublets (i.e. artificial doublets or known doublets provided through the `knownDoublets` argument, if given) among the KNN, ratio of the distances to the nearest doublet and nearest non-doublet, etc. Several of this features are reported in the output with the 'scDblFinder.' prefix, e.g.:

* `distanceToNearest` : distance to the nearest cell (real or artificial)
* `ratio` : the proportion of the KNN that are doublets. (If more than one value of `k` is given, the various ratios will be used during classification and will be reported)
* `weighted` : the proportion of the KNN that are doublets, weighted by their distance (useful for isolated cells)

### Training a classifier

Unless the `score` argument is set to 'weighted' or 'ratio' (in which case the aforementioned ratio is directly used as a doublet score), `scDblFinder` then uses gradient boosted trees trained on the kNN-derived properties along with a few additional features (e.g. library size, number of non-zero features, and an estimate of the difficultly of detecting artificial doublets in the cell's neighborhood, a variant of the `cxds` score from the `r Biocpkg("scds","scds")`, etc.) to distinguish doublets (either artificial or given) from other cells, and assigns a score on this basis. 

One problem of using a classifier for this task is that some of the real cells (the actual doublets) are mislabeled as singlet, so to speak. 
`scDblFinder` therefore iteratively retrains the classifier, each time excluding from the training the (real) cells called as doublets in the previous step (as well as unidentifiable artificial doublets). The number of steps being controlled by the `iter` parameter (in our experience, 2 or 3 is optimal).

This score is available in the output, in the `scDblFinder.score` colData column, and can be interpreted as a probability. If the data is multi-sample, a single model is trained for all samples.

### Thresholding

Rather than thresholding on some arbitrary cutoff of the score, `scDblFinder` uses the expected number of doublets in combination to the misclassification rate to establish a threshold. Unless it is manually given through the `dbr` argument, the expected doublet rate is first estimated using the empirical rule of thumb applicable to 10X data, namely roughly 1\% per 1000 cells captured (so with 5000 cells, (0.01\*5)\*5000 = 250 doublets, and the more cells you capture the higher the chance of creating a doublet). If samples were specified, and if the `dbr` is automatically calculated, thresholding is performed separately across samples.

Thresholding then tries to simultaneously minimize: 1) the classification error (in terms of the proportion of known doublets below the threshold) and 2) the deviation from the expected number of doublets among real cells (as a ratio of the total number of expected doublets within the range determined by `dbr.sd`, and adjusted for homotypic doublets). This means that, if you have no idea about the doublet rate, setting `dbr.sd=1` will make the threshold depend entirely on the misclassification rate.

### Doublet origins and enrichments

If artificial doublets are generated between clusters, it is sometimes possible to call the most likely origin (in terms of the combination of clusters) of a given putative real doublet.
We observed that at least one of the two composing cell is typically recognized, but that both are seldom correctly recognized, owing to the sometimes small relative contribution of one of the two original cells.
This information is provided through the `scDblFinder.mostLikelyOrigin` column of the output (and the `scDblFinder.originAmbiguous` column indicates whether this origin is ambiguous or rather clear).
This, in turn, allows us to identify enrichment over expectation for specific kinds of doublets.
Some statistics on each combination of clusters are saved in `metadata(sce)$scDblFinder.stats`, and the `plotDoubletMap` function can be used to visualize enrichments.
In addition, two frameworks are offered for testing the significance of enrichments:

* The `clusterStickiness` function tests whether each cluster forms more doublet than would be expected given its abundance, by default using a single quasi-binomial model fitted across all doublet types.
* The `doubletPairwiseEnrichment` function separately tests whether each specific doublet type (i.e. combination of clusters) is more abundant than expected, by default using a poisson model.

<br/><br/>

## Some important parameters

`scDblFinder` has a fair number of parameters governing the preprocessing, generation of doublets, classification, etc. (see `?scDblFinder`). Here we describe just a few of the most important ones.

### Expected proportion of doublets

The expected proportion of doublets has no impact on the density of artificial doublets in the neighborhood, but impacts the classifier's score and, especially, where the cutoff will be placed. It is specified through the `dbr` parameter and the `dbr.sd` parameter (the latter specifies a +/- range around `dbr` within which the deviation from `dbr` will be considered null). For 10x data, the more cells you capture the higher the chance of creating a doublet, and Chromium documentation indicates a doublet rate of roughly 1\% per 1000 cells captures (so with 5000 cells, (0.01\*5)\*5000 = 250 doublets), and the default expected doublet rate will be set to this value (with a default standard deviation of 0.015). Note however that different protocols may create considerably more doublets, and that this should be updated accordingly. If you have unsure about the doublet rate, you might consider increasing `dbr.sd`, so that it is estimated mostl/purely from the misclassification error.

### Number of artificial doublets

The number of artificial doublets can be set through the `artificialDoublets` parameter. Using more artificial doublets leads to a better sampling of the possible mixtures of cells, but increases memory and runtime, and can skew the scores, in extreme cases leading to difficulties in setting a threshold for being called as a doublet (see [this issue](https://github.com/plger/scDblFinder/issues/79) for a discussion).

By default, `scDblFinder` will generate roughly as many artificial doublets as there are cells, which is usually appropriate. However, for very small datasets this could represent an undersampling of the mixing space and hence lead to lower detection accuracy. For this reason, a hard minimum number of artificial doublet is set. This will tend to improve accuracy for small datasets, but the scores will be skewed towards 1, possibly making a separation difficult. If you are in such a situation and your histogram of scores does not show a bimodality, consider manually setting the `artificialDoublets` parameter to something closer to your actual number of cells.

<br/><br/>

## Frequently-asked questions

### I'm getting way too many doublets called - what's going on?

Then you most likely have a wrong doublet rate. If you did not provide it (`dbr` argument), the doublet rate will be calculated automatically using expected doublet rates from 10x, meaning that the more cells captured, the higher the doublet rates. If you have reasons to think that this is not applicable to your data, set the `dbr` manually.

The most common cause for an unexpectedly large proportion of doublets is if you have a multi-sample dataset and did not split by samples. `scDblFinder` will think that the data is a single capture with loads of cells, and hence with a very high doublet rate. Splitting by sample should solve the issue.

Also note that, although 10X-like data tends to have roughly 1\% per 1000 cells captured, the determining factor for doublet formation is the number of cells inserted into the machine. If for some reason your recovery rate is lower than expected, you might have a higher doublet rate than you'd expect from the captured and called cells (in other words, it would be preferable to say that the doublet rate is roughly 0.6\% per 1000 cells put into the machine, where 0.6 is the recovery rate). In such circumstances, `scDblFinder` typically sets the thresholds correctly nevertheless. This is because the thresholding tries to minimize both the deviation from the expected number of doublets and the misclassification (i.e. of artificial doublets), meaning that the effective (i.e. final) doublet rate will differ from the given one. `scDblFinder` also considers false positives to be less problematic than false negatives. You can reduce to some degree the deviation from the input doublet rate by setting `dbr.sd=0`.

### Should I use the cluster-based doublet generation or not?

Both approaches perform very similarly overall in benchmarks (see the [scDblFinder paper](https://f1000research.com/articles/10-979/)).
If your data is very clearly segregated into clusters, or if you are interested in the origin of the doublets, the cluster-based approach is preferable. This will also enable a more accurate accounting of homotypic doublets, and therefore a slightly better thresholding.
Otherwise, and especially if your data does not segregate very clearly into clusters, the random approach (e.g. `clusters=FALSE`, the default) is preferable.

### The clusters don't make any sense!

If you ran `scDblFinder` on a multi-sample dataset and did not provide the cluster labels, then the labels are sample-specific (meaning that label '1' in one sample might have nothing to do with label '1' in another), and plotting them on a tSNE will look like they do not make sense. For this reason, when running multiple samples we recommend to first cluster all samples together (for example using `sce$cluster <- fastcluster(sce)`) and then provide the clusters to `scDblFinder`.

### 'Size factors should be positive' error

You will get this error if you have some cells that have zero reads (or a very low read count, leading to zero after feature selection). After filtering out these cells the error should go away.

### Identifying homotypic doublets



Like other similar tools, scDblFinder focuses on identifying heterotypic doublets (formed by different cell types), and has only a low performance in identifying homotypic doublets (see [this preprint](https://doi.org/10.1101/2023.08.04.552078)). This can lead to disagreements with doublets called using cell hashes or SNPs in multiplexed samples, which capture both types of doublets similarly (and can miss intra-sample heterotypic doublets, especially if the multiplexing is low). This is why we treat these approaches as complementary.

However, should you for some reason try to identify also homotypic doublets with scDblFinder, be sure to not to use the cluster-based approach, and to set `removeUnidentifiable=FALSE`. Otherwise, scDblFinder removes artificial doublets likely to be homotypic from training, therefore focusing the task on heterotypic doublets, but at the expense ot homotypic ones (which are typically deemed relatively harmless).

### How can I make this reproducible?

Because it relies on the partly random generation of artificial doublets, running scDblFinder multiple times on the same data will yield slightly different results.
You can ensure reproducibility using `set.seed()`, however this will not be sufficient when processing multiple samples (i.e. using the `samples` argument -- even without multithreading!).
In such case, the seed needs to be passed to the BPPARAMs:

```
bp <- MulticoreParam(3, RNGseed=1234)
sce <- scDblFinder(sce, clusters="cluster", samples="sample", BPPARAM=bp)
```

Similarly, when processing the samples serially, use `SerialParam(RNGseed = seed)`.

(Note that in `BiocParallel` versions <1.28, one had in addition to explicitly start the cluster before the run using `bpstart(bp)`, and then `bpstop(bp)` after `scDblFinder`.)

### Can I use this in combination with Seurat or other tools?

If the input SCE already contains a `logcounts` assay or a `reducedDim` slot named 'PCA', scDblFinder will use them for the clustering step. In addition, a clustering can be manually given using the `clusters` argument of `scDblFinder()`. In this way, `r Githubpkg("satijalab.org/seurat")` clustering could for instance be used to create the artificial doublets (see `?Seurat::as.SingleCellExperiment.Seurat` for conversion to SCE).
For example, assuming as `Seurat` object `se`, the following could be done:

```
sce <- scDblFinder(GetAssayData(se, slot="counts"), clusters=Idents(se))
# port the resulting scores back to the Seurat object:
se$scDblFinder.score <- sce$scDblFinder.score
```

After artificial doublets generation, the counts of real and artificial cells must then be reprocessed (i.e. normalization and PCA) together, which is performed internally using `r Biocpkg("scater")`.
If you wish this step to be performed differently, you may provide your own function for doing so (see the ``processing`` argument in `?scDblFinder`). We note, however, that the impact of variations of this step on doublet detection is rather mild.
In fact, not performing any normalization at all for instance decreases doublet identification accuracy, but by rather little.

For example, the following code would enable the internal use of [sctransform](https://github.com/satijalab/sctransform):

```
# assuming `x` is the count matrix:
nfeatures <- 1000
sce <- SingleCellExperiment(list(counts=x))
# sctransform on real cells:
vst1 <- sctransform::vst(counts(sce), n_cells=min(ncol(sce),5000), verbosity=0)
sce <- sce[row.names(vst1$y),]
logcounts(sce) <- vst1$y
hvg <- row.names(sce)[head(order(vst1$gene_attr$residual_variance, decreasing=TRUE), nfeatures)]

# define a processing function that scDblFinder will use on the real+artificial doublets;
# the input should be a count matrix and the number of dimensions, and the output a PCA matrix
  
myfun <- function(e, dims){
  # we use the thetas calculated from the first vst on real cells
  e <- e[intersect(row.names(e), row.names(vst1$model_pars_fit[which(!is.na(vst1$model_pars_fit[,"theta"])),])),]
  vst2 <- sctransform::vst(e, n_cells=min(ncol(e),5000), method="nb_theta_given", 
                           theta_given=vst1$model_pars_fit[row.names(e),"theta"],
                           min_cells=1L, verbosity=0)
  scater::calculatePCA(vst2$y, ncomponents=dims)
}
  
sce <- scDblFinder(sce, processing=myfun, nfeatures=hvg)
```

Note however that this did not generally lead to improved performance -- but rather decreased on most benchmark datasets, in fact (see [comparison](https://user-images.githubusercontent.com/9786697/211782249-804aa42f-cc08-4e36-b59e-3c00a2b6f363.png) in this [issue](https://github.com/plger/scDblFinder/issues/67#issuecomment-1378543321)).




### Can this be used with scATACseq data?

Yes, see the [scATAC vignette](scATAC.html) specifically on this topic.

### Should I run QC cell filtering before or after doublet detection?

The input to `scDblFinder` should not include empty droplets, and it might be necessary to remove cells with a very low coverage (e.g. <200 or 500 reads) to avoid errors.
Further quality filtering should be performed _downstream_ of doublet detection, for two reasons:
1. the default expected doublet rate is calculated on the basis of the cells given, and if you excluded a lot of cells as low quality, `scDblFinder` might think that the doublet rate should be lower than it is.
2. kicking out all low quality cells first might hamper our ability to detect doublets that are formed by the combination of a good quality cell with a low-quality one.
This being said, these are mostly theoretical grounds, and unless your QC filtering is very stringent (and it shouldn't be!), it's unlikely to make a big difference.

#### What about ambiant RNA decontamination?

Contamination by ambiant RNA has emerged as an important confounder in single-cell (and especially single-nuclei) RNAseq data, which prompts the question of whether that should be run prior or after doublet detection. 
Unfortunately, we do not currently have good evidence pointing in either direction, and arguments can be made for both.
Low-quality doublets, or doublets from an experiment with a large dominant celltype, can easily look like contamination, and likewise a high amount of contamination can easily look like a doublet because it includes RNA from other cell types.
There is a possibility that a decontamination package sees an actual doublet as contamination, and attempts to clean it, which it will necessarily do imperfectly (because while the decontamination is a mixture of all cells, a doublet isn't), but perhaps sufficiently so that it can't be accurately detected as a doublet anymore. This would therefore be an argument for running doublet calling first. 
However, it's also possible that decontamination, because it makes the cells cleaner, makes the doublet detection task easier.

### Can I combine this method with others?

Of course it is always possible to run multiple methods and combine the results.
In our benchmark, the combination of scDblFinder with DoubletFinder, for instance, did yield an improvement in most (though not all) datasets (see [the results here](https://github.com/plger/scDblFinder/issues/67#issuecomment-1353590091)), although of a small magnitude.
The simplest way is to do an average of the scores (assuming that the scores are on a similar scale, and that a higher score has the same interpretation across methods), which for instance gave similar results to using a Fisher p-value combination on 1-score (interpreted as a probability).

# Session information {-}

```{r}
sessionInfo()
```