% -*- mode: noweb; noweb-default-code-mode: R-mode; -*- %\VignetteIndexEntry{PADOG} %\VignetteKeywords{Gene Set Analysis, Pathway Analysis} %\VignettePackage{PADOG} \documentclass[11pt]{article} %\usepackage{amsmath,epsfig,psfig,fullpage} \usepackage{amsmath,epsfig,fullpage} \usepackage{tabularx} %\usepackage{graphicx,pstricks} %\usepackage{ifpdf} \usepackage[authoryear,round]{natbib} \usepackage{hyperref} \usepackage{url} \parindent 0in \bibliographystyle{abbrvnat} \begin{document} \SweaveOpts{concordance=TRUE} \title{\bf Bioconductor's PADOG package} \author{Adi L. Tarca$^{1,2,3}$} \maketitle $^1$Center for Molecular Medicine and Genetics, Wayne State University\\ $^2$Department of Obstetrics and Gynecology, Wayne State University \\ $^3$Department of Computer Science, Wayne State University\\ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \section{Overview} This package implements the \emph{\textbf{P}athway \textbf{A}nalysis with \textbf{D}own-weighting of \textbf{O}verlapping \textbf{G}enes} (\textbf{PAD\-OG}) algorithm described in \cite{TarcaPADOG:2012}. The method can be applied to analyze any type of gene sets yet in here it is illustarted using KEGG pathways. The method computes a gene set score as the mean of absolute values of weighted moderated gene \emph{t}-scores. The gene weights are chosen to favor genes appearing in few pathways versus genes that appear in many pathways. The significance of pathway scores is evaluated using sample/array labels permutation that preserve the gene-gene correlation structure. The package also contains a benchmark for gene set analysis in general and allows a new gene set analysis method to be benchmarked against PADOG or other exsisting methods (e.g. GSA). The benchmark uses 24 different data sets, each involving a disease (e.g. Colorectal Cancer) for which there is a KEGG pathway with the same name. The only assumption we make (proven to hold in \cite{TarcaPADOG:2012}) is that the KEGG's pathway with the same name as the disease under the study should be found significant and/or ranked near the top by gene set analysis methods when analyzing a dataset that compares normal with diseased samples. \section{Pathway / gene set analysis with PADOG package} This document provides basic introduction on how to use the {\tt PADOG} package. For extended description of the methods used by this package please consult \cite{TarcaPADOG:2012} and \cite{TarcaCompPADOG:2013}.\\ We demonstrate the functionality of this package using a colorectal cancer dataset obtained using Affymetrix GeneChip technology and available through GEO (GSE9348) and incorporated in the {\tt KEGGdzPathwaysGEO} package. This experiment contains 12 normal samples and 70 colorectal cancer samples and is described in \cite{pmid20143136}. The RMA preprocessed data using the {\tt affy} package is the entry point for the {\tt padog} function: <>= library(PADOG) set = "GSE9348" data(list = set, package = "KEGGdzPathwaysGEO") #write a function to extract required info into a list getdataaslist = function(x) { x = get(x) exp = experimentData(x) dataset = exp@name disease = notes(exp)$disease dat.m = exprs(x) ano = pData(x) design = notes(exp)$design annotation = paste(x@annotation, ".db", sep = "") targetGeneSets = notes(exp)$targetGeneSets list = list(dataset, disease, dat.m, ano, design, annotation, targetGeneSets) names(list) = c("dataset", "disease", "dat.m", "ano", "design", "annotation", "targetGeneSets") return(list) } dlist = getdataaslist(set) #run padog function on KEGG pathways #use NI=1000 for accurate results and run in parallel to speed up (see below) myr = padog( esetm = dlist$dat.m, group = dlist$ano$Group, paired = dlist$design == "Paired", block = dlist$ano$Block, targetgs = dlist$targetGeneSets, annotation = dlist$annotation, gslist = "KEGGRESTpathway", organism = "hsa", verbose = FALSE, Nmin = 3, NI = 50, plots = TRUE, dseed = 1 ) myr[1:15,-c(4,5)] @ Note that for this colorectal cancer dataset it is reasonbale to expect that the KEGG's Colorectal cancer pathway will be found significant and/or ranked close to the top. PmeanAbsT corresponds to the p-value obtained without using gene weights and hence the result is worse (higher p-value) compared to Ppadog obtained by using the gene weights that are inversly related to how often the genes apear accross all gene sets to be analyzed. The plot created when {\tt plots=TRUE} in the call to {\tt padog} shows how gene weighting improves the gene set analysis for the traget pathway set via the {\tt targetgs} argument. Figure above shows the distribution of pathway/gene set scores (\emph{y} axis) for PADOG and ABSmT (which is PADOG without weights) after the first standardization (row randomization) and after second standardization (between gene sets standardization). The \emph{x} axis represents the number of iterations. Iteration 0 uses true class labels, all others used randomly permuted labels. The target pathway (set via the {\tt targetgs} argument) in this dataset is the \emph{Colorectal Cancer pathway} (KEGG ID 05210). Its score is shown with a red bullet throughout all 4 panels, and a red horizontal line marks its level when obtained with the true class labels ($ite=0$, x-axis). The box plots of scores obtained with the true class labels are also highlighted in blue. With PADOG, after the second standardization, the target pathway scores obtained from permutations are less frequently above the red line ($0/20$) (more extreme) than for ABSmT ($5/20$). Over 1,000 iterations, $p_{PADOG}$ was estimated to be 0.018 while $p_{ABSmT}$ worse, i.e. 0.138.\\ To run PADOG in parallel, you need to have package {\tt doParallel} installed, and set {\tt parallel = TRUE} in the call to {\tt padog}: <>= #you can control the number of cores to use via argument 'ncr' myr2 = padog( esetm = dlist$dat.m, group = dlist$ano$Group, paired = dlist$design == "Paired", block = dlist$ano$Block, targetgs = dlist$targetGeneSets, annotation = dlist$annotation, gslist = "KEGGRESTpathway", organism = "hsa", verbose = FALSE, Nmin = 3, NI = 50, plots = TRUE, dseed = 1, parallel = TRUE ) # verify that the result is the same which is a built-in feature all.equal(myr, myr2) @ \section{Benchmark of gene set analysis methods} The entire collection of 24 datasets available in {\tt KEGGdzPathwaysGEO} package that can be used to benchmark PADOG against existing approaches is given in Table \ref{tab:datasets}: \begin{table}[h] \small \caption{\bf{The 24 datasets used in the benchmark of pathway analysis methods}} \noindent\makebox[\textwidth]{% \begin{tabularx}{1.2\textwidth}{rllllll} \hline GEOID&Pubmed& Ref.& Disease/Target pathway & KEGGID & Tissue \\ \hline GSE1297&14769913&\cite{pmid14769913}& Alzheimer's Disease& hsa05010 &Hippocampal CA1\\ GSE5281&17077275&\cite{pmid17077275}& Alzheimer's Disease& hsa05010 &Brain, Entorhinal Cortex\\ GSE5281&17077275&\cite{pmid17077275}& Alzheimer's Disease& hsa05010 &Brain, hippocampus\\ GSE5281&17077275&\cite{pmid17077275}& Alzheimer's Disease& hsa05010 &Brain, Primary visual cortex\\ GSE20153&20926834&\cite{pmid20926834}& Parkinson's disease&hsa05012&Lymphoblasts\\ GSE20291&15965975&\cite{pmid15965975}& Parkinson's disease&hsa05012 &Postmortem brain putamen\\ GSE8762&17724341&\cite{pmid17724341}& Huntington's disease&hsa05016&Lymphocytes (blood) \\ GSE4107&17317818&\cite{pmid17317818}& Colorectal Cancer& hsa05210&Mucosa\\ GSE8671&18171984&\cite{pmid18171984}& Colorectal Cancer& hsa05210&Colon\\ GSE9348&20143136&\cite{pmid20143136}& Colorectal Cancer& hsa05210&Colon\\ GSE14762&19252501 &\cite{pmid19252501}& Renal Cancer& hsa05211&Kidney \\ GSE781&14641932&\cite{pmid14641932}& Renal Cancer& hsa05211&Kidney\\ GSE15471&19260470&\cite{pmid19260470}& Pancreatic Cancer& hsa05212&Pancreas\\ GSE16515&19732725&\cite{pmid19732725}& Pancreatic Cancer& hsa05212&Pancreas\\ GSE19728&&-&Glioma&hsa05214 &Brain\\ GSE21354&&-&Glioma&hsa05214 &Brain, Spine\\ GSE6956&18245496&\cite{pmid18245496}&Prostate Cancer& hsa05215 &Prostate\\ GSE6956&18245496&\cite{pmid18245496}& Prostate Cancer& hsa05215&Prostate\\ GSE3467&16365291&\cite{pmid16365291}& Thyroid Cancer& hsa05216&Thyroid\\ GSE3678&&-&Thyroid Cancer&hsa05216& Thyroid \\ GSE9476&17910043&\cite{pmid17910043}& Acute myeloid leukemia&hsa05221&Blood, Bone marrow \\ GSE18842&20878980&\cite{pmid20878980}& Non-Small Cell Lung Cancer&hsa05223&Lung \\ GSE19188&20421987&\cite{pmid20421987}& Non-Small Cell Lung Cancer&hsa05223&Lung \\ GSE3585&17045896&\cite{pmid17045896}& Dilated cardiomyopathy&hsa05414 &Heart\\ \hline \end{tabularx} } \begin{flushleft} The 24 datasets used to compare the pathway analysis methods were obtained from GEO. \end{flushleft} \label{tab:datasets} \end{table} To illustrate how to compare PADOG against a user defined gene set analysis method we create a function called {\tt randomF} that assignes random uniform P-values to gene sets. The user defined function has to take in 3 arguments: \begin{enumerate} \item {\tt set}: the name of a dataset available in from the KEGGdzPathwaysGEO package; \item {\tt mygslist}: a list with elements being vectors of gene ids for a given geneset \item {\tt minsize}: minimum number of genes in a geneset to be considered for analysis \end{enumerate} The output should be a dataframe with columns: ID, P, Rank, Dataset, Method for the geneset(s) considered to be relevant in that dataset (targetGeneSets). <>= randFun = function(dseed, mname = "myRand") { #a helper function to pass additional variables to your method getdataaslist = getdataaslist return(function(set, mygslist, minsize) {#your method function set.seed(dseed) #this loads the dataset data(list = set, package = "KEGGdzPathwaysGEO") #extract the required info using the function defined earlier dlist = getdataaslist(set) #get rid of duplicates probesets per ENTREZ ID by keeping the probeset #with smallest p-value (computed using limma) aT1 = filteranot(esetm = dlist$dat.m, group = dlist$ano$Group, paired = dlist$design == "Paired", block = dlist$ano$Block, annotation = dlist$annotation) #create an output dataframe for this toy method with random gene set p-values mygslistSize = unlist(lapply(mygslist, function(x) { length(intersect(aT1$ENTREZID, x)) })) res = data.frame(ID = names(mygslist), P = runif(length(mygslist)), Size = mygslistSize, stringsAsFactors = FALSE) res$FDR = p.adjust(res$P,"fdr") #drop genesets with less than minsize genes in the current dataset res = res[res$Size >= minsize,] #compute ranks res$Rank = rank(res$P) / dim(res)[1]*100 #needed to compare ranks between methods; must be the same as given #in mymethods argument "list(myRand=" res$Method = mname #needed because comparisons of ranks between methods is paired at dataset level res$Dataset = dlist$dataset #output only result for the targetGeneSets #which are gene sets expected to be relevant in this dataset return(res[res$ID %in% dlist$targetGeneSets,]) } ) } randomF = randFun(1) #run the analysis on all 24 datasets and compare the new method "myRand" with #PADOG and GSA (if installed) (chosen as reference since is listed first in the #existingMethods) #if the package doParallel is installed datasets are analyzed in parallel. #out = compPADOG(datasets = NULL, existingMethods = c("GSA","PADOG"), # mymethods = list(myRand = randomF), gslist = "KEGGRESTpathway", # Nmin = 3, NI = 1000, plots = TRUE, verbose=FALSE, # parallel = TRUE, dseed = 1, pkgs = NULL) #compare myRand against PADOG on 3 datasets only #mysets = data(package = "KEGGdzPathwaysGEO")$results[,"Item"] mysets = c("GSE9348","GSE8671","GSE1297") out = compPADOG(datasets = mysets, existingMethods = c("PADOG"), mymethods = list(myRand = randomF), gslist = "KEGGRESTpathway", Nmin = 3, NI = 40, plots = TRUE, verbose=FALSE, parallel = TRUE, dseed = 1, pkgs = NULL) print(out) @ Details about the meaning of the columns in the out table are given in \cite{TarcaPADOG:2012}. The better the method, the smaller the p-values and ranks for the target pathways, since these are supposted to be significant to their respective datasets. \bibliography{PADOG} \end{document}