bnbc 1.14.0
The bnbc package provides functionality to perform normalization and batch correction across samples on data obtained from Hi-C (Lieberman-Aiden et al. 2009) experiments.
In this package we implement tools for general subsetting of and data extraction from sets of Hi-C contact matrices, as well as smoothing of contact matrices, cross-sample normalization and cross-sample batch effect correction methods.
bnbc expects as input
GRanges object representing the genome assayed, with individual ranges having the width that is equal to the bin size used to partition the genome.list of (square) contact matrices.DataFrame object containing sample-level covariates (i.e. gender, date of processing, etc).If you use this package, please cite (Fletez-Brant et al. 2017).
It is well appreciated that Hi-C contact matrices exhibit an exponential decay in observed number of contacts as a function of the distance between the pair of interacting loci. In this work we operate, as has recently been done (i.e. (Yang et al. 2017)), on the set of all loci interacting at a specific distance, one chromosome at a time. For a given distance \(k\), the relevant set of loci are listed in each contact matrix as the entries comprising the \(k\)-th matrix diagonal (with the main diagonal being referred to as the first diagonal). We refer to these diagonals as matrix “bands”.
This document has the following dependencies
library(bnbc)bnbc uses the ContactGroup class to represent the set of contact matrices for a given set of genomic locis interactions. The class has 3 slots:
rowData: a GRanges object that has 1 element for each bin of the partitioned genome.colData: a DataFrame object that contains information on each sample (i.e. gender).contacts: a list of contact matrices.We expect each ContactGroup to represent data from 1 chromosome. We are thinking about a whole-genome container. An example dataset for chromosome 22 is supplied with the package.
data(cgEx)
cgEx## Object of class `ContactGroup` representing contact matrices with
## 1282 bins
## 40 kb average width per bin
## 14 samplesCreating a ContactGroup object requires specifying the 3 slots above:
cgEx <- ContactGroup(rowData=rowData(cgEx),
contacts=contacts(cgEx),
colData=colData(cgEx))Note that in this example, we used the accessor methods for each of these slots; there are also corresponding ‘setter’ methods, such as rowData(cgEx)<-.
Printing a ContactGroup object gives the number of bins represented by the rowData slot, the width of the bin in terms of genomic distances (i.e. 100kb) and the number of samples:
cgEx## Object of class `ContactGroup` representing contact matrices with
## 1282 bins
## 40 kb average width per bin
## 14 samplesThe InteractionSet package contains a class called InteractionSet which is essentially an extension of the ContactGroup class. The internal storage format is different and InteractionSet is not restricted to square contact matrices like the ContactGroup class. We are interested in porting the bnbc() function to using InteractionSet, but bnbc() extensively uses band matrices and we have optimized Rcpp-based routines for getting and setting bands of normal matrices, which means ContactGroup is a pretty fast for our purposes.
To get data into bnbc you need a list of contact matrices, one per sample. We assume the contact matrices are square, with no missing values. We do not require that data have been transformed or pre-processed by various bias correction software and provide methods for some simple pre-processing techniques.
There is currently no standard Hi-C data format. Instead, different groups produces custom formats, often in forms of text files. Because contact matrices are square, it is common to only distribute the upper or lower triangular matrix. In that case, you can use the following trick to make the matrix square:
mat <- matrix(1:9, nrow = 3, ncol = 3)
mat[lower.tri(mat)] <- 0
mat## [,1] [,2] [,3]
## [1,] 1 4 7
## [2,] 0 5 8
## [3,] 0 0 9## Now we fill in the lower triangular matrix with the upper triangular
mat[lower.tri(mat)] <- mat[upper.tri(mat)]
mat## [,1] [,2] [,3]
## [1,] 1 4 7
## [2,] 4 5 8
## [3,] 7 8 9Below, we demonstrate the steps needed to convert a set of hypothetical contact matrices into a ContactGroup object. The object upper.mats.list is supposed to be a list of contact matrices, each represented as an upper triangular matrix. We also suppose LociData to be a GenomicRanges object containing the loci of the contact matrices, and SampleData to be a DataFrame of per-sample information (i.e. cell type, sample name etc). We first convert all contact matrices to be symmetric matrices, then use the constructor method ContactGroup() to create the object.
## Example not run
## Convert upper triangles to symmetry matrix
MatsList <- lapply(upper.mats.list, function(M) {
M[lower.tri(M)] <- M[upper.tri(M)]
})
## Use ContactGroup constructor method
cg <- ContactGroup(rowData = LociData, contacts = MatsList, colData = SampleData)For this to work, the contacts list has to have the same names as the rownames of colData.
*.cooler filesThe .cooler file format is widely adopted and supported by bnbc. We assume a simple cooler file format (see ?getChrCGFromCools for a full description; importantly, we assume the same interactions are observed in all samples, even if some have a value of 0) of one resolution per file, generated by the cooler program. Our point of entry is to catalog which interactions are stored in the cooler file. We do this by generating an index of the positions of the file, using the function getGenomeIdx().
coolerDir <- system.file("cooler", package = "bnbc")
cools <- list.files(coolerDir, pattern="cool$", full.names=TRUE)
step <- 4e4
bin.ixns.list <- bnbc:::getGenomeIdx(cools[1], step)
bin.ixns <- bin.ixns.list$bin.ixnsWe have, as output, a list bin.ixns.list, of two elements. The first is the element bin.ixns, which is a data.table object that lists the set of interactions observed in the cooler file. The other element is a data.frame object bins, which lists the set of genomic bins and their coordinates. These are a convenience used in some functions and generally are not of interest to the end user.
With our index, we can proceed to load our data into memory, one chromosome’s data at a time (at this time our method does not handle -interactions). We emphasize that with all observations from interactions between loci on one chromosome in memory, our algorithm is extremely efficient, with custom routines for matrix updating, and requires only pass over the data.
data(cgEx)
cool.cg <- bnbc:::getChrCGFromCools(bin.ixns,
files = cools,
chr = "chr22",
colData = colData(cgEx)[1:2,])
all.equal(contacts(cgEx)[[1]], contacts(cool.cg)[[1]])## [1] TRUEIn this example, we load the ContactGroup object cgEx into memory to compare with the representation of it in cool files generated by the cooler program. We then use the method getChrCGFromCools() to load an entire chromosome’s interaction matrices (observed on all subjects) into memory. At this point, users have a valid ContactGroup object, and can proceed with their analyses as described in subsequent sections.
We provide setter and getter methods for manipulating individual matrix bands for contact matrices as well. First, we have functions for working with bands of individual matrices (not bnbc related):
mat.1 <- contacts(cgEx)[[1]]
mat.1[1000:1005, 1000:1005]## [,1] [,2] [,3] [,4] [,5] [,6]
## [1,] 5 30 36 32 53 20
## [2,] 30 7 36 38 50 16
## [3,] 36 36 3 44 51 15
## [4,] 32 38 44 4 89 39
## [5,] 53 50 51 89 36 55
## [6,] 20 16 15 39 55 5b1 <- band(mat=mat.1, band.no=2)
band(mat=mat.1, band.no=2) <- b1 + 1
mat.1[1000:1005, 1000:1005]## [,1] [,2] [,3] [,4] [,5] [,6]
## [1,] 5 31 36 32 53 20
## [2,] 31 7 37 38 50 16
## [3,] 36 37 3 45 51 15
## [4,] 32 38 45 4 90 39
## [5,] 53 50 51 90 36 56
## [6,] 20 16 15 39 56 5In this example, the main diagonal of the contact matrix is also the main diagonal of the printed example above. Similarly, band number two, which is also the first off-diagonal, is also the first off-diagonal of the printed example. As can be seen from the printed example, updating a matrix band is a symmetric operation, and updated the first off-diagonal in both the upper and lower triangles of the matrix.
To utilize this across a list of contact matrices, we have the cgApply() function which applies the same function to each of the matrices. It supports parallelization using parallel.
To adjust for differences in depth sequencing, we first apply the logCPM transform (Law et al. 2014) to each contact matrix. This transformation divides each contact matrix by the sum of the upper triangle of that matrix (adding 0.5 to each matrix cell and 1 to sum of the upper triangle), scales the resulting matrix by \(10^6\) and finally takes the log of the scaled matrix (a fudge factor is added to both numerator and denominator prior to taking the logarithm)..
cgEx.cpm <- logCPM(cgEx)Additionally, we smooth each contact matrix with a square smoothing kernel to reduce artifacts of the choice of bin width. We support both box and Gaussian smoothers.
cgEx.smooth <- boxSmoother(cgEx.cpm, h=5)
## or
## cgEx.smooth <- gaussSmoother(cgEx.cpm, radius=3, sigma=4)BNBC operates on each matrix band separately. For each matrix band \(k\), we extract each sample’s observation on that band and form a matrix \(M\) from those bands; if band \(k\) has \(d\) entries, then after logCPM transformation, \(M \in \mathbb{R}^{n \times d}\). For each such matrix, we first apply quantile normalization (Bolstad et al. 2003) to correct for distributional differences, and then ComBat (Johnson, Li, and Rabinovic 2007) to correct for batch effects.
Here we will use bnbc to do batch correction on the first 10 matrix bands, beginning with the second matrix band and ending on the eleventh.
cgEx.bnbc <- bnbc(cgEx.smooth, batch=colData(cgEx.smooth)$Batch,
threshold=1e7, step=4e4, nbands=11, verbose=FALSE)## Found 70 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 95 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 103 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 77 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 63 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 76 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 66 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 82 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 79 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.
## Found 77 genes with uniform expression within a single batch (all zeros); these will not be adjusted for batch.## R version 4.1.0 (2021-05-18)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 20.04.2 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.13-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.13-bioc/R/lib/libRlapack.so
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_GB LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## attached base packages:
## [1] stats4 parallel stats graphics grDevices utils datasets
## [8] methods base
##
## other attached packages:
## [1] bnbc_1.14.0 SummarizedExperiment_1.22.0
## [3] Biobase_2.52.0 GenomicRanges_1.44.0
## [5] GenomeInfoDb_1.28.0 IRanges_2.26.0
## [7] S4Vectors_0.30.0 MatrixGenerics_1.4.0
## [9] matrixStats_0.58.0 BiocGenerics_0.38.0
## [11] BiocStyle_2.20.0
##
## loaded via a namespace (and not attached):
## [1] httr_1.4.2 sass_0.4.0 edgeR_3.34.0
## [4] bit64_4.0.5 jsonlite_1.7.2 splines_4.1.0
## [7] bslib_0.2.5.1 BiocManager_1.30.15 blob_1.2.1
## [10] GenomeInfoDbData_1.2.6 tiff_0.1-8 yaml_2.2.1
## [13] RSQLite_2.2.7 lattice_0.20-44 limma_3.48.0
## [16] digest_0.6.27 XVector_0.32.0 htmltools_0.5.1.1
## [19] preprocessCore_1.54.0 Matrix_1.3-3 XML_3.99-0.6
## [22] genefilter_1.74.0 bookdown_0.22 zlibbioc_1.38.0
## [25] xtable_1.8-4 fftwtools_0.9-11 jpeg_0.1-8.1
## [28] BiocParallel_1.26.0 annotate_1.70.0 KEGGREST_1.32.0
## [31] mgcv_1.8-35 EBImage_4.34.0 cachem_1.0.5
## [34] survival_3.2-11 magrittr_2.0.1 crayon_1.4.1
## [37] memoise_2.0.0 evaluate_0.14 nlme_3.1-152
## [40] data.table_1.14.0 tools_4.1.0 stringr_1.4.0
## [43] Rhdf5lib_1.14.0 locfit_1.5-9.4 DelayedArray_0.18.0
## [46] AnnotationDbi_1.54.0 Biostrings_2.60.0 compiler_4.1.0
## [49] jquerylib_0.1.4 rlang_0.4.11 rhdf5_2.36.0
## [52] grid_4.1.0 RCurl_1.98-1.3 rhdf5filters_1.4.0
## [55] htmlwidgets_1.5.3 bitops_1.0-7 rmarkdown_2.8
## [58] abind_1.4-5 DBI_1.1.1 R6_2.5.0
## [61] knitr_1.33 fastmap_1.1.0 bit_4.0.4
## [64] stringi_1.6.2 sva_3.40.0 Rcpp_1.0.6
## [67] vctrs_0.3.8 png_0.1-7 xfun_0.23Bolstad, B M, R A Irizarry, M Astrand, and T P Speed. 2003. “A Comparison of Normalization Methods for High Density Oligonucleotide Array Data Based on Variance and Bias.” Bioinformatics 19: 185–93. https://doi.org/10.1093/bioinformatics/19.2.185.
Fletez-Brant, Kipper, Yunjiang Qiu, David U Gorkin, Ming Hu, and Kasper D Hansen. 2017. “Removing Unwanted Variation Between Samples in Hi-C Experiments.” bioRxiv, 214361. https://doi.org/10.1101/214361.
Johnson, W Evan, Cheng Li, and Ariel Rabinovic. 2007. “Adjusting Batch Effects in Microarray Expression Data Using Empirical Bayes Methods” 8: 118–27. https://doi.org/10.1093/biostatistics/kxj037.
Law, Charity W, Yunshun Chen, Wei Shi, and Gordon K Smyth. 2014. “Voom: Precision Weights Unlock Linear Model Analysis Tools for RNA-seq Read Counts.” Genome Biology 15: R29. https://doi.org/10.1186/gb-2014-15-2-r29.
Lieberman-Aiden, Erez, Nynke L van Berkum, Louise Williams, Maxim Imakaev, Tobias Ragoczy, Agnes Telling, Ido Amit, et al. 2009. “Comprehensive Mapping of Long-Range Interactions Reveals Folding Principles of the Human Genome.” Science 326: 289–93. https://doi.org/10.1126/science.1181369.
Yang, Tao, Feipeng Zhang, Galip Gurkan Yardimci, Fan Song, Ross C Hardison, William Stafford Noble, Feng Yue, and Qunhua Li. 2017. “HiCRep: Assessing the Reproducibility of Hi-C Data Using a Stratum- Adjusted Correlation Coefficient.” Genome Research. https://doi.org/10.1101/gr.220640.117.