From: Sebastian Witt Adds cpufreq support for FSB changing on nForce2 plattforms. On this plattforms the PCI/AGP clock is independent from the FSB and it also doesn't depend on the used CPU. Signed-off-by: Andrew Morton --- 25-akpm/Documentation/cpu-freq/cpufreq-nforce2.txt | 22 25-akpm/arch/i386/kernel/cpu/cpufreq/Kconfig | 11 25-akpm/arch/i386/kernel/cpu/cpufreq/Makefile | 1 25-akpm/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c | 468 +++++++++++++++++ 4 files changed, 502 insertions(+) diff -puN /dev/null arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c 2004-07-04 21:38:42.676300536 -0700 @@ -0,0 +1,468 @@ +/* + * (C) 2004 Sebastian Witt + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon reverse engineered information + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include +#include +#include +#include +#include +#include +#include + +#define NFORCE2_XTAL 25 +#define NFORCE2_BOOTFSB 0x48 +#define NFORCE2_PLLENABLE 0xa8 +#define NFORCE2_PLLREG 0xa4 +#define NFORCE2_PLLADR 0xa0 +#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) + +#define NFORCE2_MIN_FSB 50 +#define NFORCE2_MAX_FSB 300 +#define NFORCE2_SAFE_DISTANCE 50 + +/* Delay in ms between FSB changes */ +//#define NFORCE2_DELAY 10 + +/* nforce2_chipset: + * FSB is changed using the chipset + */ +static struct pci_dev *nforce2_chipset_dev; + +/* fid: + * multiplier * 10 + */ +static int fid = 0; + +/* min_fsb, max_fsb: + * maximum and minimum available FSB + */ +static int min_fsb = 0; +static int max_fsb = 0; + +MODULE_AUTHOR("Sebastian Witt "); +MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); +MODULE_LICENSE("GPL"); + +module_param(fid, int, 0444); +module_param(min_fsb, int, 0444); +module_param(max_fsb, int, 0444); + +MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); +MODULE_PARM_DESC(min_fsb, + "Minimum FSB to use, if not defined: current FSB - 50"); +MODULE_PARM_DESC(max_fsb, "Maximum FSB to use, if not defined: current FSB"); + +/* DEBUG + * Define it if you want verbose debug output, e.g. for bug reporting + */ +#define NFORCE2_DEBUG + +#ifdef NFORCE2_DEBUG +#define dprintk(msg...) printk(msg) +#else +#define dprintk(msg...) do { } while(0) +#endif + +/* + * nforce2_calc_fsb - calculate FSB + * @pll: PLL value + * + * Calculates FSB from PLL value + */ +static int nforce2_calc_fsb(int pll) +{ + unsigned char mul, div; + + mul = (pll >> 8) & 0xff; + div = pll & 0xff; + + if (div > 0) + return NFORCE2_XTAL * mul / div; + + return 0; +} + +/* + * nforce2_calc_pll - calculate PLL value + * @fsb: FSB + * + * Calculate PLL value for given FSB + */ +static int nforce2_calc_pll(unsigned int fsb) +{ + unsigned char xmul, xdiv; + unsigned char mul = 0, div = 0; + int tried = 0; + + /* Try to calculate multiplier and divider up to 4 times */ + while (((mul == 0) || (div == 0)) && (tried <= 3)) { + for (xdiv = 1; xdiv <= 0x80; xdiv++) + for (xmul = 1; xmul <= 0xfe; xmul++) + if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == + fsb + tried) { + mul = xmul; + div = xdiv; + } + tried++; + } + + if ((mul == 0) || (div == 0)) + return -1; + + return NFORCE2_PLL(mul, div); +} + +/* + * nforce2_write_pll - write PLL value to chipset + * @pll: PLL value + * + * Writes new FSB PLL value to chipset + */ +static void nforce2_write_pll(int pll) +{ + int temp; + + /* Set the pll addr. to 0x00 */ + temp = 0x00; + pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp); + + /* Now write the value in all 64 registers */ + for (temp = 0; temp <= 0x3f; temp++) { + pci_write_config_dword(nforce2_chipset_dev, + NFORCE2_PLLREG, pll); + } + + return; +} + +/* + * nforce2_fsb_read - Read FSB + * + * Read FSB from chipset + */ +static unsigned int nforce2_fsb_read(void) +{ + struct pci_dev *nforce2_sub5; + u32 fsb, temp = 0; + + /* PLL reg. already set? */ + pci_read_config_byte(nforce2_chipset_dev, + NFORCE2_PLLENABLE, (u8 *)&temp); + + if (!temp) { + /* Get chipset boot FSB from subdevice 5 */ + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + 0x01EF, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + + if (!nforce2_sub5) + return 0; + + pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); + fsb = fsb / 1000000; + } else { + /* Use PLL reg. value */ + pci_read_config_dword(nforce2_chipset_dev, + NFORCE2_PLLREG, &temp); + fsb = nforce2_calc_fsb(temp); + } + + return fsb; +} + +/* + * nforce2_set_fsb - set new FSB + * @fsb: New FSB + * + * Sets new FSB + */ +int nforce2_set_fsb(unsigned int fsb) +{ + u32 pll, temp = 0; + unsigned int tfsb; + int diff; + + if ((fsb > NFORCE2_MAX_FSB) || (fsb < NFORCE2_MIN_FSB)) { + printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); + return -EINVAL; + } + + tfsb = nforce2_fsb_read(); + if (!tfsb) { + printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); + return -EINVAL; + } + + /* First write? Then set actual value */ + pci_read_config_byte(nforce2_chipset_dev, + NFORCE2_PLLENABLE, (u8 *)&temp); + if (!temp) { + pll = nforce2_calc_pll(tfsb); + + if (pll < 0) + return -EINVAL; + + nforce2_write_pll(pll); + } + + /* Enable write access */ + temp = 0x01; + pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp); + + diff = tfsb - fsb; + + if (!diff) + return 0; + + while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { + if (diff < 0) + tfsb++; + else + tfsb--; + + /* Calculate the PLL reg. value */ + if ((pll = nforce2_calc_pll(tfsb)) == -1) + return -EINVAL; + + nforce2_write_pll(pll); +#ifdef NFORCE2_DELAY + mdelay(NFORCE2_DELAY); +#endif + } + + temp = 0x40; + pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp); + + return 0; +} + +/** + * nforce2_get - get the CPU frequency + * @cpu: CPU number + * + * Returns the CPU frequency + */ +static unsigned int nforce2_get(unsigned int cpu) +{ + if (cpu) + return 0; + return nforce2_fsb_read() * fid * 100; +} + +/** + * nforce2_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int nforce2_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ +// unsigned long flags; + struct cpufreq_freqs freqs; + unsigned int target_fsb; + + if ((target_freq > policy->max) || (target_freq < policy->min)) + return -EINVAL; + + target_fsb = target_freq / (fid * 100); + + freqs.old = nforce2_get(policy->cpu); + freqs.new = target_fsb * fid * 100; + freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */ + + if (freqs.old == freqs.new) + return 0; + + printk(KERN_INFO "cpufreq: Old CPU frequency %d kHz, new %d kHz\n", + freqs.old, freqs.new); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Disable IRQs */ + //local_irq_save(flags); + + if (nforce2_set_fsb(target_fsb) < 0) + printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", + target_fsb); + else + printk(KERN_INFO "cpufreq: Changed FSB successfully to %d\n", + target_fsb); + + /* Enable IRQs */ + //local_irq_restore(flags); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +/** + * nforce2_verify - verifies a new CPUFreq policy + * @policy: new policy + */ +static int nforce2_verify(struct cpufreq_policy *policy) +{ + unsigned int fsb_pol_max; + + fsb_pol_max = policy->max / (fid * 100); + + if (policy->min < (fsb_pol_max * fid * 100)) + policy->max = (fsb_pol_max + 1) * fid * 100; + + cpufreq_verify_within_limits(policy, + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + return 0; +} + +static int nforce2_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int fsb; + unsigned int rfid; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + fsb = nforce2_fsb_read(); + + if (!fsb) + return -EIO; + + /* FIX: Get FID from CPU */ + if (!fid) { + if (!cpu_khz) { + printk(KERN_WARNING + "cpufreq: cpu_khz not set, can't calculate multiplier!\n"); + return -ENODEV; + } + + fid = cpu_khz / (fsb * 100); + rfid = fid % 5; + + if (rfid) { + if (rfid > 2) + fid += 5 - rfid; + else + fid -= rfid; + } + } + + printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, + fid / 10, fid % 10); + + if (!max_fsb) + max_fsb = fsb; + if (!min_fsb) + min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; + + if (max_fsb > NFORCE2_MAX_FSB) + max_fsb = NFORCE2_MAX_FSB; + if (min_fsb < NFORCE2_MIN_FSB) + min_fsb = NFORCE2_MIN_FSB; + + if (max_fsb > fsb) + printk(KERN_WARNING + "cpufreq: Warning! Overclocking the FSB from %d to %d can cause unstability and data loss!\n", + fsb, max_fsb); + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = min_fsb * fid * 100; + policy->cpuinfo.max_freq = max_fsb * fid * 100; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = nforce2_get(policy->cpu); + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + return 0; +} + +static int nforce2_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver nforce2_driver = { + .name = "nforce2", + .verify = nforce2_verify, + .target = nforce2_target, + .get = nforce2_get, + .init = nforce2_cpu_init, + .exit = nforce2_cpu_exit, + .owner = THIS_MODULE, +}; + +/** + * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic + * + * Detects nForce2 A2 and C1 stepping + * + */ +static unsigned int nforce2_detect_chipset(void) +{ + u8 revision; + + nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + + if (nforce2_chipset_dev == NULL) + return -ENODEV; + + pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision); + + printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", + revision); + printk(KERN_INFO + "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); + + return 0; +} + +/** + * nforce2_init - initializes the nForce2 CPUFreq driver + * + * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init nforce2_init(void) +{ + /* TODO: do we need to detect the processor? */ + + /* detect chipset */ + if (nforce2_detect_chipset()) { + printk(KERN_ERR "cpufreq: No nForce2 chipset.\n"); + return -ENODEV; + } + + return cpufreq_register_driver(&nforce2_driver); +} + +/** + * nforce2_exit - unregisters cpufreq module + * + * Unregisters nForce2 FSB change support. + */ +static void __exit nforce2_exit(void) +{ + cpufreq_unregister_driver(&nforce2_driver); +} + +module_init(nforce2_init); +module_exit(nforce2_exit); + diff -puN arch/i386/kernel/cpu/cpufreq/Kconfig~cpufreq-driver-for-nforce2-kernel-267 arch/i386/kernel/cpu/cpufreq/Kconfig --- 25/arch/i386/kernel/cpu/cpufreq/Kconfig~cpufreq-driver-for-nforce2-kernel-267 2004-07-04 21:38:42.666302056 -0700 +++ 25-akpm/arch/i386/kernel/cpu/cpufreq/Kconfig 2004-07-04 21:38:42.673300992 -0700 @@ -196,6 +196,17 @@ config X86_SPEEDSTEP_RELAXED_CAP_CHECK option let's the probing code bypass some of those checks if the parameter "relaxed_check=1" is passed to the module. +config X86_CPUFREQ_NFORCE2 + tristate "nVidia nForce2 FSB changing" + depends on CPU_FREQ && EXPERIMENTAL + help + This adds the CPUFreq driver for FSB changing on nVidia nForce2 + plattforms. + + For details, take a look at . + + If in doubt, say N. + config X86_LONGRUN tristate "Transmeta LongRun" depends on CPU_FREQ diff -puN arch/i386/kernel/cpu/cpufreq/Makefile~cpufreq-driver-for-nforce2-kernel-267 arch/i386/kernel/cpu/cpufreq/Makefile --- 25/arch/i386/kernel/cpu/cpufreq/Makefile~cpufreq-driver-for-nforce2-kernel-267 2004-07-04 21:38:42.668301752 -0700 +++ 25-akpm/arch/i386/kernel/cpu/cpufreq/Makefile 2004-07-04 21:38:42.674300840 -0700 @@ -11,6 +11,7 @@ obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speed obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o +obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o ifdef CONFIG_X86_ACPI_CPUFREQ ifdef CONFIG_ACPI_DEBUG diff -puN /dev/null Documentation/cpu-freq/cpufreq-nforce2.txt --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/Documentation/cpu-freq/cpufreq-nforce2.txt 2004-07-04 21:38:42.672301144 -0700 @@ -0,0 +1,22 @@ + +The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms. + +This works better than on other plattforms, because the FSB of the CPU +can be controlled independently from the PCI/AGP clock. + +The module has three options: + + fid: multiplier * 10 (for example 8.5 = 85) + min_fsb: minimum FSB + max_fsb: maximum FSB + +If not set, fid is calculated with the current CPU speed and the FSB, +max_fsb is set to the current FSB and min_fsb to current FSB - 50. + +IMPORTANT: The available range is limited up- _and_ downwards! + You should not set max_fsb higher than the FSB at boot- + time. + Also the minimum available FSB can differ, for systems + booting with 200 MHz, 150 should always work. + + _