From: Pavel Machek ipw2100 uses custom debug prints that are sometimes longer and always harder to read than normal printk. They also introduced some bugs where prefix is printed twice. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton --- drivers/net/wireless/ipw2100.c | 91 ++++++++++++++++++++--------------------- 1 files changed, 45 insertions(+), 46 deletions(-) diff -puN drivers/net/wireless/ipw2100.c~ipw2100-cleanup-debug-prints drivers/net/wireless/ipw2100.c --- 25/drivers/net/wireless/ipw2100.c~ipw2100-cleanup-debug-prints 2005-06-18 00:38:11.000000000 -0700 +++ 25-akpm/drivers/net/wireless/ipw2100.c 2005-06-18 00:38:11.000000000 -0700 @@ -484,7 +484,7 @@ int ipw2100_get_ordinal(struct ipw2100_p u32 total_length; if (ordinals->table1_addr == 0) { - IPW_DEBUG_WARNING(DRV_NAME ": attempt to use fw ordinals " + printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " "before they have been loaded.\n"); return -EINVAL; } @@ -493,8 +493,7 @@ int ipw2100_get_ordinal(struct ipw2100_p if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) { *len = IPW_ORD_TAB_1_ENTRY_SIZE; - IPW_DEBUG_WARNING(DRV_NAME - ": ordinal buffer length too small, need %d\n", + printk(KERN_WARNING DRV_NAME ": ordinal buffer length too small, need %d\n", IPW_ORD_TAB_1_ENTRY_SIZE); return -EINVAL; @@ -546,7 +545,7 @@ int ipw2100_get_ordinal(struct ipw2100_p return 0; } - IPW_DEBUG_WARNING(DRV_NAME ": ordinal %d neither in table 1 nor " + printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " "in table 2\n", ord); return -EINVAL; @@ -761,7 +760,7 @@ static int ipw2100_hw_send_command(struc } if (priv->fatal_error) { - IPW_DEBUG_WARNING("%s: firmware fatal error\n", + printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n", priv->net_dev->name); return -EIO; } @@ -1001,7 +1000,7 @@ static int ipw2100_download_firmware(str /* load microcode */ err = ipw2100_ucode_download(priv, &ipw2100_firmware); if (err) { - IPW_DEBUG_ERROR("%s: Error loading microcode: %d\n", + printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n", priv->net_dev->name, err); goto fail; } @@ -1014,7 +1013,7 @@ static int ipw2100_download_firmware(str /* s/w reset and clock stabilization (again!!!) */ err = sw_reset_and_clock(priv); if (err) { - IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n", + printk(KERN_ERR DRV_NAME ": %s: sw_reset_and_clock failed: %d\n", priv->net_dev->name, err); goto fail; } @@ -1208,7 +1207,7 @@ static int ipw2100_start_adapter(struct * fw & dino ucode */ if (ipw2100_download_firmware(priv)) { - IPW_DEBUG_ERROR("%s: Failed to power on the adapter.\n", + printk(KERN_ERR DRV_NAME ": %s: Failed to power on the adapter.\n", priv->net_dev->name); return -EIO; } @@ -1268,7 +1267,7 @@ static int ipw2100_start_adapter(struct i ? "SUCCESS" : "FAILED"); if (!i) { - IPW_DEBUG_WARNING("%s: Firmware did not initialize.\n", + printk(KERN_WARNING DRV_NAME ": %s: Firmware did not initialize.\n", priv->net_dev->name); return -EIO; } @@ -1464,7 +1463,7 @@ static int ipw2100_hw_stop_adapter(struc err = ipw2100_hw_phy_off(priv); if (err) - IPW_DEBUG_WARNING("Error disabling radio %d\n", err); + printk(KERN_WARNING DRV_NAME ": Error disabling radio %d\n", err); /* * If in D0-standby mode going directly to D3 may cause a @@ -1490,7 +1489,7 @@ static int ipw2100_hw_stop_adapter(struc err = ipw2100_hw_send_command(priv, &cmd); if (err) - IPW_DEBUG_WARNING( + printk(KERN_WARNING DRV_NAME ": " "%s: Power down command failed: Error %d\n", priv->net_dev->name, err); else { @@ -1531,7 +1530,7 @@ static int ipw2100_hw_stop_adapter(struc } if (i == 0) - IPW_DEBUG_WARNING(DRV_NAME + printk(KERN_WARNING DRV_NAME ": %s: Could now power down adapter.\n", priv->net_dev->name); @@ -1571,13 +1570,13 @@ static int ipw2100_disable_adapter(struc err = ipw2100_hw_send_command(priv, &cmd); if (err) { - IPW_DEBUG_WARNING("exit - failed to send CARD_DISABLE command\n"); + printk(KERN_WARNING DRV_NAME ": exit - failed to send CARD_DISABLE command\n"); goto fail_up; } err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED); if (err) { - IPW_DEBUG_WARNING("exit - card failed to change to DISABLED\n"); + printk(KERN_WARNING DRV_NAME ": exit - card failed to change to DISABLED\n"); goto fail_up; } @@ -1687,7 +1686,7 @@ static int ipw2100_up(struct ipw2100_pri (priv->status & STATUS_RESET_PENDING)) { /* Power cycle the card ... */ if (ipw2100_power_cycle_adapter(priv)) { - IPW_DEBUG_WARNING("%s: Could not cycle adapter.\n", + printk(KERN_WARNING DRV_NAME ": %s: Could not cycle adapter.\n", priv->net_dev->name); rc = 1; goto exit; @@ -1697,7 +1696,7 @@ static int ipw2100_up(struct ipw2100_pri /* Load the firmware, start the clocks, etc. */ if (ipw2100_start_adapter(priv)) { - IPW_DEBUG_ERROR("%s: Failed to start the firmware.\n", + printk(KERN_ERR DRV_NAME ": %s: Failed to start the firmware.\n", priv->net_dev->name); rc = 1; goto exit; @@ -1707,7 +1706,7 @@ static int ipw2100_up(struct ipw2100_pri /* Determine capabilities of this particular HW configuration */ if (ipw2100_get_hw_features(priv)) { - IPW_DEBUG_ERROR("%s: Failed to determine HW features.\n", + printk(KERN_ERR DRV_NAME ": %s: Failed to determine HW features.\n", priv->net_dev->name); rc = 1; goto exit; @@ -1715,7 +1714,7 @@ static int ipw2100_up(struct ipw2100_pri lock = LOCK_NONE; if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) { - IPW_DEBUG_ERROR("%s: Failed to clear ordinal lock.\n", + printk(KERN_ERR DRV_NAME ": %s: Failed to clear ordinal lock.\n", priv->net_dev->name); rc = 1; goto exit; @@ -1741,7 +1740,7 @@ static int ipw2100_up(struct ipw2100_pri /* Send all of the commands that must be sent prior to * HOST_COMPLETE */ if (ipw2100_adapter_setup(priv)) { - IPW_DEBUG_ERROR("%s: Failed to start the card.\n", + printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", priv->net_dev->name); rc = 1; goto exit; @@ -1750,7 +1749,7 @@ static int ipw2100_up(struct ipw2100_pri if (!deferred) { /* Enable the adapter - sends HOST_COMPLETE */ if (ipw2100_enable_adapter(priv)) { - IPW_DEBUG_ERROR( + printk(KERN_ERR DRV_NAME ": " "%s: failed in call to enable adapter.\n", priv->net_dev->name); ipw2100_hw_stop_adapter(priv); @@ -1808,7 +1807,7 @@ static void ipw2100_down(struct ipw2100_ spin_unlock_irqrestore(&priv->low_lock, flags); if (ipw2100_hw_stop_adapter(priv)) - IPW_DEBUG_ERROR("%s: Error stopping adapter.\n", + printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n", priv->net_dev->name); /* Do not disable the interrupt until _after_ we disable @@ -2415,7 +2414,7 @@ static inline void isr_rx(struct ipw2100 /* We need to allocate a new SKB and attach it to the RDB. */ if (unlikely(ipw2100_alloc_skb(priv, packet))) { - IPW_DEBUG_WARNING( + printk(KERN_WARNING DRV_NAME ": " "%s: Unable to allocate SKB onto RBD ring - disabling " "adapter.\n", priv->net_dev->name); /* TODO: schedule adapter shutdown */ @@ -2677,7 +2676,7 @@ static inline int __ipw2100_tx_process(s break; default: - IPW_DEBUG_WARNING("%s: Bad fw_pend_list entry!\n", + printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n", priv->net_dev->name); return 0; } @@ -2691,7 +2690,7 @@ static inline int __ipw2100_tx_process(s read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, &w); if (w != txq->next) - IPW_DEBUG_WARNING("%s: write index mismatch\n", + printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n", priv->net_dev->name); /* @@ -2752,7 +2751,7 @@ static inline int __ipw2100_tx_process(s switch (packet->type) { case DATA: if (txq->drv[txq->oldest].status.info.fields.txType != 0) - IPW_DEBUG_WARNING("%s: Queue mismatch. " + printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " "Expecting DATA TBD but pulled " "something else: ids %d=%d.\n", priv->net_dev->name, txq->oldest, packet->index); @@ -2799,7 +2798,7 @@ static inline int __ipw2100_tx_process(s case COMMAND: if (txq->drv[txq->oldest].status.info.fields.txType != 1) - IPW_DEBUG_WARNING("%s: Queue mismatch. " + printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " "Expecting COMMAND TBD but pulled " "something else: ids %d=%d.\n", priv->net_dev->name, txq->oldest, packet->index); @@ -3083,7 +3082,7 @@ static void ipw2100_irq_tasklet(struct i (unsigned long)inta & IPW_INTERRUPT_MASK); if (inta & IPW2100_INTA_FATAL_ERROR) { - IPW_DEBUG_WARNING(DRV_NAME + printk(KERN_WARNING DRV_NAME ": Fatal interrupt. Scheduling firmware restart.\n"); priv->inta_other++; write_register( @@ -3103,7 +3102,7 @@ static void ipw2100_irq_tasklet(struct i } if (inta & IPW2100_INTA_PARITY_ERROR) { - IPW_DEBUG_ERROR("***** PARITY ERROR INTERRUPT !!!! \n"); + printk(KERN_ERR DRV_NAME ": ***** PARITY ERROR INTERRUPT !!!! \n"); priv->inta_other++; write_register( dev, IPW_REG_INTA, @@ -3221,7 +3220,7 @@ static irqreturn_t ipw2100_interrupt(int if (inta == 0xFFFFFFFF) { /* Hardware disappeared */ - IPW_DEBUG_WARNING("IRQ INTA == 0xFFFFFFFF\n"); + printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n"); goto none; } @@ -3306,7 +3305,7 @@ static int ipw2100_msg_allocate(struct i IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet), GFP_KERNEL); if (!priv->msg_buffers) { - IPW_DEBUG_ERROR("%s: PCI alloc failed for msg " + printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg " "buffers.\n", priv->net_dev->name); return -ENOMEM; } @@ -3317,7 +3316,7 @@ static int ipw2100_msg_allocate(struct i sizeof(struct ipw2100_cmd_header), &p); if (!v) { - IPW_DEBUG_ERROR( + printk(KERN_ERR DRV_NAME ": " "%s: PCI alloc failed for msg " "buffers.\n", priv->net_dev->name); @@ -3814,7 +3813,7 @@ int ipw2100_switch_mode(struct ipw2100_p err = ipw2100_disable_adapter(priv); if (err) { - IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n", + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", priv->net_dev->name, err); return err; } @@ -4255,7 +4254,7 @@ static int ipw2100_tx_allocate(struct ip TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet), GFP_ATOMIC); if (!priv->tx_buffers) { - IPW_DEBUG_ERROR("%s: alloc failed form tx buffers.\n", + printk(KERN_ERR DRV_NAME ": %s: alloc failed form tx buffers.\n", priv->net_dev->name); bd_queue_free(priv, &priv->tx_queue); return -ENOMEM; @@ -4265,7 +4264,7 @@ static int ipw2100_tx_allocate(struct ip v = pci_alloc_consistent( priv->pci_dev, sizeof(struct ipw2100_data_header), &p); if (!v) { - IPW_DEBUG_ERROR("%s: PCI alloc failed for tx " + printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for tx " "buffers.\n", priv->net_dev->name); err = -ENOMEM; break; @@ -4576,7 +4575,7 @@ int ipw2100_set_port_type(struct ipw2100 if (!batch_mode) { err = ipw2100_disable_adapter(priv); if (err) { - IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n", + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", priv->net_dev->name, err); return err; } @@ -5195,7 +5194,7 @@ static int ipw2100_set_wep_flags(struct if (!batch_mode) { err = ipw2100_disable_adapter(priv); if (err) { - IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n", + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", priv->net_dev->name, err); return err; } @@ -5283,7 +5282,7 @@ static int ipw2100_set_key(struct ipw210 err = ipw2100_disable_adapter(priv); /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */ if (err) { - IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n", + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", priv->net_dev->name, err); return err; } @@ -5319,7 +5318,7 @@ static int ipw2100_set_key_index(struct if (!batch_mode) { err = ipw2100_disable_adapter(priv); if (err) { - IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n", + printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", priv->net_dev->name, err); return err; } @@ -5867,7 +5866,7 @@ static int ipw2100_wpa_set_param(struct break; default: - IPW_DEBUG_ERROR("%s: Unknown WPA param: %d\n", + printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n", dev->name, name); ret = -EOPNOTSUPP; } @@ -5890,7 +5889,7 @@ static int ipw2100_wpa_mlme(struct net_d break; default: - IPW_DEBUG_ERROR("%s: Unknown MLME request: %d\n", + printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n", dev->name, command); ret = -EOPNOTSUPP; } @@ -6140,7 +6139,7 @@ static int ipw2100_wpa_supplicant(struct break; default: - IPW_DEBUG_ERROR("%s: Unknown WPA supplicant request: %d\n", + printk(KERN_ERR DRV_NAME ": %s: Unknown WPA supplicant request: %d\n", dev->name, param->cmd); ret = -EOPNOTSUPP; @@ -8362,7 +8361,7 @@ static int ipw2100_mod_firmware_load(str (struct ipw2100_fw_header *)fw->fw_entry->data; if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) { - IPW_DEBUG_WARNING("Firmware image not compatible " + printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " "(detected version id of %u). " "See Documentation/networking/README.ipw2100\n", h->version); @@ -8405,7 +8404,7 @@ int ipw2100_get_firmware(struct ipw2100_ rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); if (rc < 0) { - IPW_DEBUG_ERROR( + printk(KERN_ERR DRV_NAME ": " "%s: Firmware '%s' not available or load failed.\n", priv->net_dev->name, fw_name); return rc; @@ -8487,7 +8486,7 @@ int ipw2100_fw_download(struct ipw2100_p firmware_data_left -= 2; if (len > 32) { - IPW_DEBUG_ERROR( + printk(KERN_ERR DRV_NAME ": " "Invalid firmware run-length of %d bytes\n", len); return -EINVAL; @@ -8597,7 +8596,7 @@ int ipw2100_ucode_download(struct ipw210 } if (i == 10) { - IPW_DEBUG_ERROR("%s: Error initializing Symbol\n", + printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n", dev->name); return -EIO; } @@ -8618,7 +8617,7 @@ int ipw2100_ucode_download(struct ipw210 } if (i == 30) { - IPW_DEBUG_ERROR("%s: No response from Symbol - hw not alive\n", + printk(KERN_ERR DRV_NAME ": %s: No response from Symbol - hw not alive\n", dev->name); printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response)); return -EIO; _