[ 0.0] Examining the guest ... [ 16.1] Setting a random seed [ 16.2] Installing firstboot script: /mnt/tmp/riscv64/tmp/psad.Dl6Zh8/psad-boot.sh [ 16.2] Copying: /mnt/tmp/riscv64/tmp/psad.Dl6Zh8/psad-2.4.3-3.fc25.src.rpm to /var/tmp [ 16.3] Copying: /mnt/tmp/riscv64/tmp/psad.Dl6Zh8/local.repo to /etc/yum.repos.d/ [ 16.4] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. systemd[1]: Reached target Swap. [ OK ] Reached target Swap. systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... systemd[1]: Starting Journal Service... Starting Journal Service... systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Slices. EXT4-fs (vda): re-mounted. Opts: (null) Starting udev Coldplug all Devices... [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Paths. Starting Apply Kernel Variables... [ OK ] Reached target Remote File Systems. Mounting POSIX Message Queue File System... [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Temporary Directory (/tmp). Starting Rebuild Hardware Database... Starting Configure read-only root support... Starting Create System Users... [ OK ] Started Apply Kernel Variables. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... systemd-journald[82]: Received request to flush runtime journal from PID 1 [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Configure read-only root support. Starting Load/Save Random Seed... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [* ] (1 of 3) A start job is running for…Hardware Database (20s / 1min 33s) [** ] (1 of 3) A start job is running for…Hardware Database (21s / 1min 33s) [*** ] (1 of 3) A start job is running for…Hardware Database (21s / 1min 33s) [ *** ] (2 of 3) A start job is running for dev-ttyS0.device (22s / 1min 30s) [ OK ] Started udev Coldplug all Devices. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Kernel Device Manager... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started dnf makecache timer. [ OK ] Reached target Basic System. Starting OpenSSH ed25519 Server Key Generation... Starting OpenSSH rsa Server Key Generation... [ OK ] Started D-Bus System Message Bus. Starting OpenSSH ecdsa Server Key Generation... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting Login Service... Starting Network Service... [ OK ] Found device /dev/ttyS0. [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Started Network Service. [ *** ] (2 of 2) A start job is running for…er Key Generation (47s / no limit) [ ***] (2 of 2) A start job is running for…er Key Generation (48s / no limit) [ **] (1 of 2) A start job is running for Login Service (49s / 2min 3s) [ OK ] Started OpenSSH rsa Server Key Generation. [ *] A start job is running for Login Service (56s / 2min 3s) [ **] A start job is running for Login Service (57s / 2min 3s) [ ***] A start job is running for Login Service (57s / 2min 3s) [ *** ] A start job is running for Login Service (58s / 2min 3s) [ *** ] A start job is running for Login Service (59s / 2min 3s) [*** ] A start job is running for Login Service (59s / 2min 3s) [** ] A start job is running for Login Service (1min / 2min 3s) [* ] A start job is running for Login Service (1min / 2min 3s) [** ] A start job is running for Login Service (1min 1s / 2min 3s) [*** ] A start job is running for Login Service (1min 2s / 2min 3s) [ *** ] A start job is running for Login Service (1min 2s / 2min 3s) [ *** ] A start job is running for Login Service (1min 3s / 2min 3s) [ ***] A start job is running for Login Service (1min 3s / 2min 3s) [ **] A start job is running for Login Service (1min 4s / 2min 3s) [ *] A start job is running for Login Service (1min 5s / 2min 3s) [ **] A start job is running for Login Service (1min 5s / 2min 3s) [ ***] A start job is running for Login Service (1min 6s / 2min 3s) [ *** ] A start job is running for Login Service (1min 6s / 2min 3s) [ *** ] A start job is running for Login Service (1min 7s / 2min 3s) [*** ] A start job is running for Login Service (1min 8s / 2min 3s) [** ] A start job is running for Login Service (1min 8s / 2min 3s) [* ] A start job is running for Login Service (1min 9s / 2min 3s) [** ] A start job is running for Login Service (1min 9s / 2min 3s) [*** ] A start job is running for Login Service (1min 10s / 2min 3s) [ *** ] A start job is running for Login Service (1min 11s / 2min 3s) [ *** ] A start job is running for Login Service (1min 11s / 2min 3s) [ ***] A start job is running for Login Service (1min 12s / 2min 3s) [ **] A start job is running for Login Service (1min 12s / 2min 3s) [ *] A start job is running for Login Service (1min 13s / 2min 3s) [ **] A start job is running for Login Service (1min 13s / 2min 3s) [ ***] A start job is running for Login Service (1min 14s / 2min 3s) [ *** ] A start job is running for Login Service (1min 15s / 2min 3s) random: crng init done [ *** ] A start job is running for Login Service (1min 15s / 2min 3s) [*** ] A start job is running for Login Service (1min 16s / 2min 3s) [** ] A start job is running for Login Service (1min 16s / 2min 3s) [* ] A start job is running for Login Service (1min 17s / 2min 3s) [** ] A start job is running for Login Service (1min 18s / 2min 3s) [*** ] A start job is running for Login Service (1min 18s / 2min 3s) [ *** ] A start job is running for Login Service (1min 19s / 2min 3s) [ *** ] A start job is running for Login Service (1min 19s / 2min 3s) [ ***] A start job is running for Login Service (1min 20s / 2min 3s) [ **] A start job is running for Login Service (1min 21s / 2min 3s) [ *] A start job is running for Login Service (1min 21s / 2min 3s) [ **] A start job is running for Login Service (1min 22s / 2min 3s) [ ***] A start job is running for Login Service (1min 22s / 2min 3s) [ *** ] A start job is running for Login Service (1min 23s / 2min 3s) [ *** ] A start job is running for Login Service (1min 24s / 2min 3s) [*** ] A start job is running for Login Service (1min 24s / 2min 3s) [** ] A start job is running for Login Service (1min 25s / 2min 3s) [* ] A start job is running for Login Service (1min 25s / 2min 3s) [** ] A start job is running for Login Service (1min 26s / 2min 3s) [*** ] A start job is running for Login Service (1min 26s / 2min 3s) [ *** ] A start job is running for Login Service (1min 27s / 2min 3s) [ *** ] A start job is running for Login Service (1min 28s / 2min 3s) [ ***] A start job is running for Login Service (1min 28s / 2min 3s) [ **] A start job is running for Login Service (1min 29s / 2min 3s) [ *] A start job is running for Login Service (1min 29s / 2min 3s) [ **] A start job is running for Login Service (1min 30s / 2min 3s) [ ***] A start job is running for Login Service (1min 31s / 2min 3s) [ *** ] A start job is running for Login Service (1min 31s / 2min 3s)  Starting Wait for Network to be Configured... [ OK ] Reached target Network. Starting Permit User Sessions... Starting libguestfs firstboot service... [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [ OK ] Started Wait for Network to be Configured. [ OK ] Started Permit User Sessions. firstboot.sh[153]: /usr/lib/virt-sysprep/firstboot.sh start firstboot.sh[153]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. [ OK ] Started Set the date and time. firstboot.sh[153]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-psad-Dl6Zh8-psad-boot-sh === firstboot.sh[153]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[153]: + set -e firstboot.sh[153]: + exec Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.15.0-rc9-00064-gf923ce3a29af on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: [ OK ] Stopped target Login Prompts. Stopping Serial Getty on ttyS0... Stopping Getty on tty1... Stopping D-Bus System Message Bus... [ OK ] Stopped target Timers. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped target Network is Online. [ OK ] Stopped Wait for Network to be Configured. [ OK ] Removed slice system-sshd\x2dkeygen.slice. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped Login Service. [ OK ] Stopped target sshd-keygen.target. [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Removed slice system-getty.slice. Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped libguestfs firstboot service. [ OK ] Stopped target Basic System. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped dnf makecache timer. [ OK ] Stopped target Paths. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped target Network. Stopping Network Service... [ OK ] Stopped target System Initialization. Stopping Update UTMP about System Boot/Shutdown... Stopping Load/Save Random Seed... [ OK ] Stopped Update is Completed. [ OK ] Stopped Rebuild Hardware Database. [ OK ] Stopped Rebuild Dynamic Linker Cache. [ OK ] Stopped Rebuild Journal Catalog. [ OK ] Stopped Network Service. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting Temporary Directory (/tmp)... Unmounting /run/user/1000... [ OK ] Stopped Configure read-only root support. [ OK ] Unmounted Temporary Directory (/tmp). [ OK ] Unmounted /run/user/1000. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Power-Off... systemd-shutdow: 17 output lines suppressed due to ratelimiting systemd-shutdown[1]: Syncing filesystems and block devices. systemd-shutdown[1]: Sending SIGTERM to remaining processes... systemd-journald[82]: Received SIGTERM from PID 1 (systemd-shutdow). systemd-shutdown[1]: Sending SIGKILL to remaining processes... systemd-shutdown[1]: Unmounting file systems. EXT4-fs (vda): re-mounted. Opts: data=ordered systemd-shutdown[1]: All filesystems unmounted. systemd-shutdown[1]: Deactivating swaps. systemd-shutdown[1]: All swaps deactivated. systemd-shutdown[1]: Detaching loop devices. systemd-shutdown[1]: All loop devices detached. systemd-shutdown[1]: Detaching DM devices. reboot: Power down Power off cp: cannot stat '/mnt/tmp/riscv64/tmp/psad.Dl6Zh8/RPMS/noarch/*.noarch.rpm': No such file or directory /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild /mnt/tmp/riscv64/RPMS /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild Worker 0: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pungi-4.1.11-4.fc25.noarch.rpm: RPM Error opening Package Worker 1: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/py4j-doc-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 15: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python2-py4j-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 9: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python3-pyflakes-1.3.0-2.fc25.noarch.rpm: RPM Error opening Package Worker 9: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python3-pytest-2.9.2-3.fc25.noarch.rpm: RPM Error opening Package Worker 14: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pyshp-1.2.5-2.fc25.noarch.rpm: RPM Error opening Package Worker 8: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python2-pytest-2.9.2-3.fc25.noarch.rpm: RPM Error opening Package Worker 0: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python3-py4j-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 2: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pungi-4.1.9-1.fc25.noarch.rpm: RPM Error opening Package Worker 5: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/py4j-javadoc-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 5: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python3-pyshp-1.2.5-2.fc25.noarch.rpm: RPM Error opening Package Worker 3: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/py4j-java-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 6: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pyflakes-1.3.0-2.fc25.noarch.rpm: RPM Error opening Package Failed to process 13 package(s). Spawning worker 0 with 1056 pkgs Spawning worker 1 with 1056 pkgs Spawning worker 2 with 1056 pkgs Spawning worker 3 with 1056 pkgs Spawning worker 4 with 1056 pkgs Spawning worker 5 with 1056 pkgs Spawning worker 6 with 1056 pkgs Spawning worker 7 with 1056 pkgs Spawning worker 8 with 1056 pkgs Spawning worker 9 with 1056 pkgs Spawning worker 10 with 1056 pkgs Spawning worker 11 with 1055 pkgs Spawning worker 12 with 1055 pkgs Spawning worker 13 with 1055 pkgs Spawning worker 14 with 1055 pkgs Spawning worker 15 with 1055 pkgs Workers Finished /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild sending incremental file list RPMS/ RPMS/repodata/ sent 868,226 bytes received 39 bytes 578,843.33 bytes/sec total size is 11,303,817,234 speedup is 13,018.86 ~/d/fedora-riscv-autobuild /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild sending incremental file list SRPMS/ SRPMS/pycryptopp-0.6.0.1206569328141510525648634803928199668821045408958-10.fc28.src.rpm SRPMS/pyliblo-0.10.0-4.fc28.src.rpm SRPMS/python3-docs-3.5.2-1.fc25.src.rpm SRPMS/python3-iep-3.7-2.fc25.src.rpm SRPMS/python3-mallard-ducktype-0.2-5.fc25.src.rpm SRPMS/python3-memcached-1.51-8.fc25.src.rpm SRPMS/python3-mypy-0.4.3-2.src.rpm SRPMS/python3-openid-3.0.9-4.fc25.src.rpm SRPMS/python3-pkgversion-macros-1-6.fc24.src.rpm SRPMS/python3-pocketlint-0.13-2.fc25.src.rpm SRPMS/python3-py3dns-3.0.4-8.fc25.src.rpm SRPMS/python3-pyPEG2-2.15.2-2.fc25.src.rpm SRPMS/python3-pyjf3-0.3-5.fc25.src.rpm sent 20,486,160 bytes received 272 bytes 362,591.72 bytes/sec total size is 13,553,174,253 speedup is 661.57 sending incremental file list noarch/ noarch/python3-docs-3.5.2-1.fc25.noarch.rpm noarch/python3-iep-3.7-2.fc25.noarch.rpm noarch/python3-mallard-ducktype-0.2-5.fc25.noarch.rpm noarch/python3-memcached-1.51-8.fc25.noarch.rpm noarch/python3-mypy-0.4.3-2.noarch.rpm noarch/python3-openid-3.0.9-4.fc25.noarch.rpm noarch/python3-pkgversion-macros-1-6.fc24.noarch.rpm noarch/python3-pocketlint-0.13-2.fc25.noarch.rpm noarch/python3-py3dns-3.0.4-8.fc25.noarch.rpm noarch/python3-pyPEG2-2.15.2-2.fc25.noarch.rpm noarch/python3-pyjf3-0.3-5.fc25.noarch.rpm sent 9,632,828 bytes received 234 bytes 305,811.49 bytes/sec total size is 9,597,232,139 speedup is 996.28 sending incremental file list riscv64/ riscv64/pycryptopp-0.6.0.1206569328141510525648634803928199668821045408958-10.fc28.riscv64.rpm riscv64/python2-pyliblo-0.10.0-4.fc28.riscv64.rpm riscv64/python3-pyliblo-0.10.0-4.fc28.riscv64.rpm sent 2,423,982 bytes received 82 bytes 193,925.12 bytes/sec total size is 1,659,649,844 speedup is 684.66 sending incremental file list repodata/ sent 822 bytes received 19 bytes 336.40 bytes/sec total size is 46,935,251 speedup is 55,808.86 sending incremental file list logs/psad-2.4.3-3.fc25.src.rpm/script.log logs/pyode-1.2.0-14.fc25.src.rpm/script.log logs/pysubnettree-0.24-2.fc25.src.rpm/script.log sent 930,192 bytes received 48,637 bytes 130,510.53 bytes/sec total size is 775,505,781 speedup is 792.28 sending incremental file list sent 71 bytes received 11 bytes 32.80 bytes/sec total size is 43,266 speedup is 527.63 ~/d/fedora-riscv-autobuild