Description: manpage-has-errors-from-man "macro not defined" Delete all occurrences of ".lp" and ".iX" in manpages to get rid of this lintian warnings. Author: Matteo Cypriani <mcy@lm7.fr> Last-Update: 2021-01-30 --- a/doc/diskd.1 +++ b/doc/diskd.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,7 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p diskd" .PP The diskd command has the following syntax: .PP @@ -82,7 +78,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/diskseekd.1 +++ b/doc/diskseekd.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,9 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p diskseekd" -.iX "c dust (shaking it off from a drive)" -.iX "c shaking off dust from a drive" .PP Several people have noticed that Linux has a bad tendency of killing floppy drives. These failures remained completely mysterious, until @@ -96,7 +90,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP --- a/doc/fdmount.1 +++ b/doc/fdmount.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,11 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p fdmount" -.iX "p fdmountd" -.iX "p fdlist" -.iX "p fdumount" -.iX "c automounting" .PP .nf @@ -97,7 +89,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/fdrawcmd.1 +++ b/doc/fdrawcmd.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,10 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p fdrawcmd" -.iX "c raw command" -.iX "c low level interaction with floppy driver" -.iX "c direct interaction with floppy driver" .PP .nf @@ -85,7 +78,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -152,7 +144,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/floppycontrol.1 +++ b/doc/floppycontrol.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,8 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p floppycontrol" -.iX "c configuration of floppy driver" .PP .nf @@ -93,7 +88,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -114,9 +108,6 @@ (\fR\&\f(CW\(if/dev/fd0\(is\fR). .PP .SH One\ time\ actions -.iX "c ejecting a disk" -.iX "c flushing floppy cache" -.iX "c resetting controller" .PP The following \fR\&\f(CWfloppycontrol\fR options don't set a configuration parameter, but perform a one-time action. They are available to anybody @@ -161,9 +152,6 @@ this. .PP .SH Printing\ current\ settings -.iX "c printing current settings" -.iX "c determining drive type" -.iX "c detecting a disk change" .IP .TP \&\fR\&\f(CW-T\fR\ @@ -320,9 +308,6 @@ .RE .PP .SH Drive\ type\ configuration\ and\ autodetection -.iX "c CMOS type" -.iX "c drive type" -.iX "c swapping drives" .PP The following options handle the different available drive types, such as double density vs. high density vs. extra density drives, and 5 1/4 @@ -392,7 +377,6 @@ .fi .in -0.3i .ft R -.lp \&\fRmeans to try out the formats whose minor device numbers are 28 (1.44M), 16 (720KB), 96 (1.76MB), and 100 (1.92MB), in this order. For the 1.76MB @@ -424,10 +408,6 @@ create. .PP .SH Configuration\ of\ the\ disk\ change\ line -.iX "c disk change line" -.iX "c Thinkpad" -.iX "c disk change detection" -.iX "c disk absent during operation (false alert)" .TP \&\fR\&\f(CW--broken_dcl\fR\ Assumes that the disk change line of the drive is broken. If this is @@ -478,7 +458,6 @@ Switches off silent disk change line clearing for this drive. .PP .SH Timing\ Parameters -.iX "c strange noises during seek" .PP This section describes how to configure drive timings. To set these parameters, you need superuser privileges. All times are in "jiffy" --- a/doc/floppymeter.1 +++ b/doc/floppymeter.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,9 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p floppymeter" -.iX "c rotation speed" -.iX "c raw capacity" .PP .nf @@ -83,7 +77,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/getfdprm.1 +++ b/doc/getfdprm.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,9 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p getfdprm" -.iX "c reading back the geometry information" -.iX "c geometry information (reading back)" .PP .nf @@ -82,7 +76,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/makefloppies.1 +++ b/doc/makefloppies.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -79,7 +76,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/setfdprm.1 +++ b/doc/setfdprm.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,9 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p setfdprm" -.iX "c setting the geometry information" -.iX "c geometry information (setting)" .PP .nf @@ -85,7 +79,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/superformat.1 +++ b/doc/superformat.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,8 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p superformat" -.iX "c formatting disks (non XDF)" .PP .nf @@ -86,7 +81,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -288,7 +282,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -309,7 +302,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -322,7 +314,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -335,7 +326,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -348,7 +338,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -362,7 +351,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -376,7 +364,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -391,7 +378,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP --- a/doc/xdfcopy.1 +++ b/doc/xdfcopy.1 @@ -33,7 +33,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP @@ -47,7 +46,6 @@ .fi .in -0.3i .ft R -.lp \&\fRA pre-made HTML can be found at: \&\fR\&\f(CW\(ifhttp://www.tux.org/pub/knaff/fdutils\(is\fR @@ -62,7 +60,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -70,9 +67,6 @@ the info version certain examples are difficult to read due to the quoting conventions used in info. .SH Description -.iX "p xdfcopy" -.iX "c XDF (formatting and copying disks)" -.iX "c formatting XDF disks" .PP .nf @@ -83,7 +77,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .PP @@ -144,7 +137,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .IP @@ -157,7 +149,6 @@ .fi .in -0.3i .ft R -.lp \&\fR .TP