commit ef0d5feb32ab7007d1316e9c5037cd7d9f7febbf Author: Greg Kroah-Hartman Date: Wed Jun 21 15:45:41 2023 +0200 Linux 5.10.185 Link: https://lore.kernel.org/r/20230619102138.279161276@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Salvatore Bonaccorso Tested-by: Chris Paterson (CIP) Tested-by: Jon Hunter Tested-by: Sudip Mukherjee Tested-by: Linux Kernel Functional Testing Tested-by: Allen Pais Tested-by: Shuah Khan Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit ed2bf5cee6c6d5dc788ef19e8b984182c594d3ec Author: Johannes Berg Date: Mon Dec 14 20:51:02 2020 +0100 um: Fix build w/o CONFIG_PM_SLEEP commit 1fb1abc83636f5329c26cd29f0f19f3faeb697a5 upstream. uml_pm_wake() is unconditionally called from the SIGUSR1 wakeup handler since that's in the userspace portion of UML, and thus a bit tricky to ifdef out. Since pm_system_wakeup() can always be called (but may be an empty inline), also simply always have uml_pm_wake() to fix the build. Reported-by: Randy Dunlap Acked-by: Randy Dunlap # build-tested Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman commit f73ec12dc718ee90ec45fd23dad38c5020a5b1f5 Author: José Roberto de Souza Date: Thu Jun 15 13:39:09 2023 +0200 drm/i915/gen11+: Only load DRAM information from pcode [ Upstream commit 5d0c938ec9cc96fc7b8abcff0ca8b2a084e9c90c ] Up to now we were reading some DRAM information from MCHBAR register and from pcode what is already not good but some GEN12(TGL-H and ADL-S) platforms have MCHBAR DRAM information in different offsets. This was notified to HW team that decided that the best alternative is always apply the 16gb_dimm watermark adjustment for GEN12+ platforms and read the remaning DRAM information needed to other display programming from pcode. So here moving the DRAM pcode function to intel_dram.c, removing the duplicated fields from intel_qgv_info, setting and using information from dram_info. v2: - bring back num_points to intel_qgv_info as num_qgv_point can be overwritten in icl_get_qgv_points() - add gen12_get_dram_info() and simplify gen11_get_dram_info() Reviewed-by: Lucas De Marchi Signed-off-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-2-jose.souza@intel.com Signed-off-by: Henning Schild Signed-off-by: Greg Kroah-Hartman commit 27458487c8f466924868bab2f2e73be97b86e601 Author: Matt Roper Date: Thu Jun 15 13:39:08 2023 +0200 drm/i915/dg1: Wait for pcode/uncore handshake at startup [ Upstream commit f9c730ede7d3f40900cb493890d94d868ff2f00f ] DG1 does some additional pcode/uncore handshaking at boot time; this handshaking must complete before various other pcode commands are effective and before general work is submitted to the GPU. We need to poll a new pcode mailbox during startup until it reports that this handshaking is complete. The bspec doesn't give guidance on how long we may need to wait for this handshaking to complete. For now, let's just set a really long timeout; if we still don't get a completion status by the end of that timeout, we'll just continue on and hope for the best. v2 (Lucas): Rename macros to make clear the relation between command and result (requested by José) Bspec: 52065 Cc: Clinton Taylor Cc: Ville Syrjälä Cc: Radhakrishna Sripada Signed-off-by: Matt Roper Signed-off-by: Lucas De Marchi Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20201001063917.3133475-2-lucas.demarchi@intel.com Signed-off-by: Henning Schild Signed-off-by: Greg Kroah-Hartman commit 2d1c19597d1eb7f18c9d906aa7e144733eccdcc8 Author: Hyunwoo Kim Date: Mon Jun 12 16:39:07 2023 +0300 media: dvb-core: Fix use-after-free due to race at dvb_register_device() commit 627bb528b086b4136315c25d6a447a98ea9448d3 upstream. dvb_register_device() dynamically allocates fops with kmemdup() to set the fops->owner. And these fops are registered in 'file->f_ops' using replace_fops() in the dvb_device_open() process, and kfree()d in dvb_free_device(). However, it is not common to use dynamically allocated fops instead of 'static const' fops as an argument of replace_fops(), and UAF may occur. These UAFs can occur on any dvb type using dvb_register_device(), such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc. So, instead of kfree() the fops dynamically allocated in dvb_register_device() in dvb_free_device() called during the .disconnect() process, kfree() it collectively in exit_dvbdev() called when the dvbdev.c module is removed. Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit 5c61c3945adf14757a4d914633bbb47439484cce Author: Mauro Carvalho Chehab Date: Mon Jun 12 16:39:06 2023 +0300 media: dvbdev: fix error logic at dvb_register_device() commit 1fec2ecc252301110e4149e6183fa70460d29674 upstream. As reported by smatch: drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:510 dvb_register_device() warn: '&dvbdev->list_head' not removed from list drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:530 dvb_register_device() warn: '&dvbdev->list_head' not removed from list drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:545 dvb_register_device() warn: '&dvbdev->list_head' not removed from list The error logic inside dvb_register_device() doesn't remove devices from the dvb_adapter_list in case of errors. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit a1b26dac8bc6b1a8814594010f8808e0debc3dc1 Author: Dinghao Liu Date: Mon Jun 12 16:39:05 2023 +0300 media: dvbdev: Fix memleak in dvb_register_device commit 167faadfcf9339088910e9e85a1b711fcbbef8e9 upstream. When device_create() fails, dvbdev and dvbdevfops should be freed just like when dvb_register_media_device() fails. Signed-off-by: Dinghao Liu Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit a13dee47fa2a5799999fb3c104939d751f16810d Author: Ryusuke Konishi Date: Fri May 26 11:13:32 2023 +0900 nilfs2: reject devices with insufficient block count commit 92c5d1b860e9581d64baca76779576c0ab0d943d upstream. The current sanity check for nilfs2 geometry information lacks checks for the number of segments stored in superblocks, so even for device images that have been destructively truncated or have an unusually high number of segments, the mount operation may succeed. This causes out-of-bounds block I/O on file system block reads or log writes to the segments, the latter in particular causing "a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to hang. Fix this issue by checking the number of segments stored in the superblock and avoiding mounting devices that can cause out-of-bounds accesses. To eliminate the possibility of overflow when calculating the number of blocks required for the device from the number of segments, this also adds a helper function to calculate the upper bound on the number of segments and inserts a check using it. Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2 Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit c374552b54d6fd93e048e834bb48c1c079a51f2e Author: David Hildenbrand Date: Thu Nov 12 14:38:13 2020 +0100 mm/memory_hotplug: extend offline_and_remove_memory() to handle more than one memory block commit 8dc4bb58a146655eb057247d7c9d19e73928715b upstream. virtio-mem soon wants to use offline_and_remove_memory() memory that exceeds a single Linux memory block (memory_block_size_bytes()). Let's remove that restriction. Let's remember the old state and try to restore that if anything goes wrong. While re-onlining can, in general, fail, it's highly unlikely to happen (usually only when a notifier fails to allocate memory, and these are rather rare). This will be used by virtio-mem to offline+remove memory ranges that are bigger than a single memory block - for example, with a device block size of 1 GiB (e.g., gigantic pages in the hypervisor) and a Linux memory block size of 128MB. While we could compress the state into 2 bit, using 8 bit is much easier. This handling is similar, but different to acpi_scan_try_to_offline(): a) We don't try to offline twice. I am not sure if this CONFIG_MEMCG optimization is still relevant - it should only apply to ZONE_NORMAL (where we have no guarantees). If relevant, we can always add it. b) acpi_scan_try_to_offline() simply onlines all memory in case something goes wrong. It doesn't restore previous online type. Let's do that, so we won't overwrite what e.g., user space configured. Reviewed-by: Wei Yang Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Pankaj Gupta Cc: Michal Hocko Cc: Oscar Salvador Cc: Wei Yang Cc: Andrew Morton Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20201112133815.13332-28-david@redhat.com Signed-off-by: Michael S. Tsirkin Acked-by: Andrew Morton Signed-off-by: Ma Wupeng Signed-off-by: Greg Kroah-Hartman commit e6dc6a9d0a760b7d4dd62cc6452f85f6eee45bff Author: Christian Loehle Date: Wed Apr 26 16:59:39 2023 +0000 mmc: block: ensure error propagation for non-blk commit 003fb0a51162d940f25fc35e70b0996a12c9e08a upstream. Requests to the mmc layer usually come through a block device IO. The exceptions are the ioctl interface, RPMB chardev ioctl and debugfs, which issue their own blk_mq requests through blk_execute_rq and do not query the BLK_STS error but the mmcblk-internal drv_op_result. This patch ensures that drv_op_result defaults to an error and has to be overwritten by the operation to be considered successful. The behavior leads to a bug where the request never propagates the error, e.g. by directly erroring out at mmc_blk_mq_issue_rq if mmc_blk_part_switch fails. The ioctl caller of the rpmb chardev then can never see an error (BLK_STS_IOERR, but drv_op_result is unchanged) and thus may assume that their call executed successfully when it did not. While always checking the blk_execute_rq return value would be advised, let's eliminate the error by always setting drv_op_result as -EIO to be overwritten on success (or other error) Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests") Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/59c17ada35664b818b7bd83752119b2d@hyperstone.com Signed-off-by: Ulf Hansson Signed-off-by: Christian Loehle Signed-off-by: Greg Kroah-Hartman commit 7ce0e8b287204dd0b8c9ca001da16b8f6658ceee Author: Sven Eckelmann Date: Fri Jul 23 19:23:17 2021 +0200 batman-adv: Switch to kstrtox.h for kstrtou64 commit 55207227189a07513ba4107d72e256313a66a2f3 upstream. The commit 4c52729377ea ("kernel.h: split out kstrtox() and simple_strtox() to a separate header") moved the kstrtou64 function to a new header called linux/kstrtox.h. Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman commit e6104284c42fd4659cab90b3ee9be0fa2e3d7ee1 Author: Leon Romanovsky Date: Wed Mar 8 11:23:13 2023 +0200 neighbour: delete neigh_lookup_nodev as not used commit 76b9bf965c98c9b53ef7420b3b11438dbd764f92 upstream. neigh_lookup_nodev isn't used in the kernel after removal of DECnet. So let's remove it. Fixes: 1202cdd66531 ("Remove DECnet support from kernel") Signed-off-by: Leon Romanovsky Reviewed-by: Eric Dumazet Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit bf82668eb950e3ca977b5f92bcb1a756db5563dc Author: Guillaume Nault Date: Fri Sep 30 16:37:30 2022 +0200 net: Remove DECnet leftovers from flow.h. commit 9bc61c04ff6cce6a3756b86e6b34914f7b39d734 upstream. DECnet was removed by commit 1202cdd66531 ("Remove DECnet support from kernel"). Let's also revome its flow structure. Compile-tested only (allmodconfig). Signed-off-by: Guillaume Nault Acked-by: Stephen Hemminger Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7d07fd03f50c2048abe4c45719630de3b9613c46 Author: Gaosheng Cui Date: Thu Sep 22 16:38:57 2022 +0800 net: Remove unused inline function dst_hold_and_use() commit 0b81882ddf8ac2743f657afb001beec7fc3929af upstream. All uses of dst_hold_and_use() have been removed since commit 1202cdd66531 ("Remove DECnet support from kernel"), so remove it. Signed-off-by: Gaosheng Cui Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 53076071fb92a46119ba7f4e3369f1e7a5237f9c Author: Gaosheng Cui Date: Thu Sep 22 16:38:55 2022 +0800 neighbour: Remove unused inline function neigh_key_eq16() commit c8f01a4a54473f88f8cc0d9046ec9eb5a99815d5 upstream. All uses of neigh_key_eq16() have been removed since commit 1202cdd66531 ("Remove DECnet support from kernel"), so remove it. Signed-off-by: Gaosheng Cui Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7230a9e599d30d0fac0d57d866e0e79478e8f0a7 Author: Ziwei Dai Date: Fri Mar 31 20:42:09 2023 +0800 rcu/kvfree: Avoid freeing new kfree_rcu() memory after old grace period commit 5da7cb193db32da783a3f3e77d8b639989321d48 upstream. Memory passed to kvfree_rcu() that is to be freed is tracked by a per-CPU kfree_rcu_cpu structure, which in turn contains pointers to kvfree_rcu_bulk_data structures that contain pointers to memory that has not yet been handed to RCU, along with an kfree_rcu_cpu_work structure that tracks the memory that has already been handed to RCU. These structures track three categories of memory: (1) Memory for kfree(), (2) Memory for kvfree(), and (3) Memory for both that arrived during an OOM episode. The first two categories are tracked in a cache-friendly manner involving a dynamically allocated page of pointers (the aforementioned kvfree_rcu_bulk_data structures), while the third uses a simple (but decidedly cache-unfriendly) linked list through the rcu_head structures in each block of memory. On a given CPU, these three categories are handled as a unit, with that CPU's kfree_rcu_cpu_work structure having one pointer for each of the three categories. Clearly, new memory for a given category cannot be placed in the corresponding kfree_rcu_cpu_work structure until any old memory has had its grace period elapse and thus has been removed. And the kfree_rcu_monitor() function does in fact check for this. Except that the kfree_rcu_monitor() function checks these pointers one at a time. This means that if the previous kfree_rcu() memory passed to RCU had only category 1 and the current one has only category 2, the kfree_rcu_monitor() function will send that current category-2 memory along immediately. This can result in memory being freed too soon, that is, out from under unsuspecting RCU readers. To see this, consider the following sequence of events, in which: o Task A on CPU 0 calls rcu_read_lock(), then uses "from_cset", then is preempted. o CPU 1 calls kfree_rcu(cset, rcu_head) in order to free "from_cset" after a later grace period. Except that "from_cset" is freed right after the previous grace period ended, so that "from_cset" is immediately freed. Task A resumes and references "from_cset"'s member, after which nothing good happens. In full detail: CPU 0 CPU 1 ---------------------- ---------------------- count_memcg_event_mm() |rcu_read_lock() <--- |mem_cgroup_from_task() |// css_set_ptr is the "from_cset" mentioned on CPU 1 |css_set_ptr = rcu_dereference((task)->cgroups) |// Hard irq comes, current task is scheduled out. cgroup_attach_task() |cgroup_migrate() |cgroup_migrate_execute() |css_set_move_task(task, from_cset, to_cset, true) |cgroup_move_task(task, to_cset) |rcu_assign_pointer(.., to_cset) |... |cgroup_migrate_finish() |put_css_set_locked(from_cset) |from_cset->refcount return 0 |kfree_rcu(cset, rcu_head) // free from_cset after new gp |add_ptr_to_bulk_krc_lock() |schedule_delayed_work(&krcp->monitor_work, ..) kfree_rcu_monitor() |krcp->bulk_head[0]'s work attached to krwp->bulk_head_free[] |queue_rcu_work(system_wq, &krwp->rcu_work) |if rwork->rcu.work is not in WORK_STRUCT_PENDING_BIT state, |call_rcu(&rwork->rcu, rcu_work_rcufn) <--- request new gp // There is a perious call_rcu(.., rcu_work_rcufn) // gp end, rcu_work_rcufn() is called. rcu_work_rcufn() |__queue_work(.., rwork->wq, &rwork->work); |kfree_rcu_work() |krwp->bulk_head_free[0] bulk is freed before new gp end!!! |The "from_cset" is freed before new gp end. // the task resumes some time later. |css_set_ptr->subsys[(subsys_id) <--- Caused kernel crash, because css_set_ptr is freed. This commit therefore causes kfree_rcu_monitor() to refrain from moving kfree_rcu() memory to the kfree_rcu_cpu_work structure until the RCU grace period has completed for all three categories. v2: Use helper function instead of inserted code block at kfree_rcu_monitor(). Fixes: 34c881745549 ("rcu: Support kfree_bulk() interface in kfree_rcu()") Fixes: 5f3c8d620447 ("rcu/tree: Maintain separate array for vmalloc ptrs") Reported-by: Mukesh Ojha Signed-off-by: Ziwei Dai Reviewed-by: Uladzislau Rezki (Sony) Tested-by: Uladzislau Rezki (Sony) Signed-off-by: Paul E. McKenney Signed-off-by: Suren Baghdasaryan Signed-off-by: Greg Kroah-Hartman commit a261589621764519207ab07c898c1e7d6b78fc1f Author: John Sperbeck Date: Sun May 21 19:29:53 2023 +0000 cgroup: always put cset in cgroup_css_set_put_fork commit 2bd110339288c18823dcace602b63b0d8627e520 upstream. A successful call to cgroup_css_set_fork() will always have taken a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always do a corresponding put in cgroup_css_set_put_fork(). Without this, a cset and its contained css structures will be leaked for some fork failures. The following script reproduces the leak for a fork failure due to exceeding pids.max in the pids controller. A similar thing can happen if we jump to the bad_fork_cancel_cgroup label in copy_process(). [ -z "$1" ] && echo "Usage $0 pids-root" && exit 1 PID_ROOT=$1 CGROUP=$PID_ROOT/foo [ -e $CGROUP ] && rmdir -f $CGROUP mkdir $CGROUP echo 5 > $CGROUP/pids.max echo $$ > $CGROUP/cgroup.procs fork_bomb() { set -e for i in $(seq 10); do /bin/sleep 3600 & done } (fork_bomb) & wait echo $$ > $PID_ROOT/cgroup.procs kill $(cat $CGROUP/cgroup.procs) rmdir $CGROUP Fixes: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: John Sperbeck Signed-off-by: Tejun Heo [TJM: This backport accommodates the lack of cgroup_unlock] Signed-off-by: T.J. Mercier Signed-off-by: Greg Kroah-Hartman commit 4c10843863321d87c7be82332e9f848cac8f896c Author: David Howells Date: Fri Jun 16 22:39:39 2023 +0100 afs: Fix vlserver probe RTT handling [ Upstream commit ba00b190670809c1a89326d80de96d714f6004f2 ] In the same spirit as commit ca57f02295f1 ("afs: Fix fileserver probe RTT handling"), don't rule out using a vlserver just because there haven't been enough packets yet to calculate a real rtt. Always set the server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt, which is capped at 1 second. This could lead to EDESTADDRREQ errors when accessing a cell for the first time, even though the vl servers are known and have responded to a probe. Fixes: 1d4adfaf6574 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity") Signed-off-by: Marc Dionne Signed-off-by: David Howells cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.html Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 49b6607dedc238db3bb0e838801f39a936461d84 Author: Alex Maftei Date: Thu Jun 15 09:34:04 2023 +0100 selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET [ Upstream commit 76a4c8b82938bc5020b67663db41f451684bf327 ] Previously, timestamps were printed using "%lld.%u" which is incorrect for nanosecond values lower than 100,000,000 as they're fractional digits, therefore leading zeros are meaningful. This patch changes the format strings to "%lld.%09u" in order to add leading zeros to the nanosecond value. Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program") Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility") Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings") Signed-off-by: Alex Maftei Acked-by: Richard Cochran Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 08899e8d5a99d94ae2353f12fca090e80bca2d2d Author: Lin Ma Date: Wed Jun 14 20:06:04 2023 +0800 net: tipc: resize nlattr array to correct size [ Upstream commit 44194cb1b6045dea33ae9a0d54fb7e7cd93a2e09 ] According to nla_parse_nested_deprecated(), the tb[] is supposed to the destination array with maxtype+1 elements. In current tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used which is unnecessary. This patch resize them to a proper size. Fixes: 1e55417d8fc6 ("tipc: add media set to new netlink api") Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api") Signed-off-by: Lin Ma Reviewed-by: Florian Westphal Reviewed-by: Tung Nguyen Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5fd696b404fb1d6db749d2e4f1195495d832351a Author: Eric Dumazet Date: Wed Jun 14 16:18:02 2023 +0000 net: lapbether: only support ethernet devices [ Upstream commit 9eed321cde22fc1afd76eac563ce19d899e0d6b2 ] It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Martin Schiller Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 6ee3728ae87eaf86ff693ec1440e0bf96a513eec Author: Vlad Buslov Date: Mon Jun 12 11:34:26 2023 +0200 net/sched: cls_api: Fix lockup on flushing explicitly created chain [ Upstream commit c9a82bec02c339cdda99b37c5e62b3b71fc4209c ] Mingshuai Ren reports: When a new chain is added by using tc, one soft lockup alarm will be generated after delete the prio 0 filter of the chain. To reproduce the problem, perform the following steps: (1) tc qdisc add dev eth0 root handle 1: htb default 1 (2) tc chain add dev eth0 (3) tc filter del dev eth0 chain 0 parent 1: prio 0 (4) tc filter add dev eth0 chain 0 parent 1: Fix the issue by accounting for additional reference to chains that are explicitly created by RTM_NEWCHAIN message as opposed to implicitly by RTM_NEWTFILTER message. Fixes: 726d061286ce ("net: sched: prevent insertion of new classifiers during chain flush") Reported-by: Mingshuai Ren Closes: https://lore.kernel.org/lkml/87legswvi3.fsf@nvidia.com/T/ Signed-off-by: Vlad Buslov Link: https://lore.kernel.org/r/20230612093426.2867183-1-vladbu@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit efed5b50f3b835b7e12459f5a77b99931215596c Author: Fabio M. De Francesco Date: Wed Jun 14 12:02:55 2023 +0200 ext4: drop the call to ext4_error() from ext4_get_group_info() [ Upstream commit f451fd97dd2b78f286379203a47d9d295c467255 ] A recent patch added a call to ext4_error() which is problematic since some callers of the ext4_get_group_info() function may be holding a spinlock, whereas ext4_error() must never be called in atomic context. This triggered a report from Syzbot: "BUG: sleeping function called from invalid context in ext4_update_super" (see the link below). Therefore, drop the call to ext4_error() from ext4_get_group_info(). In the meantime use eight characters tabs instead of nine characters ones. Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/ Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail") Suggested-by: Theodore Ts'o Signed-off-by: Fabio M. De Francesco Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com Signed-off-by: Sasha Levin commit 6ab91d1adb5a57d7380e902ff3b89564f138c4e7 Author: Natalia Petrova Date: Fri May 12 13:33:20 2023 +0300 drm/nouveau: add nv_encoder pointer check for NULL [ Upstream commit 55b94bb8c42464bad3d2217f6874aa1a85664eac ] Pointer nv_encoder could be dereferenced at nouveau_connector.c in case it's equal to NULL by jumping to goto label. This patch adds a NULL-check to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 3195c5f9784a ("drm/nouveau: set encoder for lvds") Signed-off-by: Natalia Petrova Reviewed-by: Lyude Paul [Fixed patch title] Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin commit 5d43bb9b3e0c03751f69209ce277006499a9f747 Author: Natalia Petrova Date: Fri May 12 14:15:26 2023 +0300 drm/nouveau/dp: check for NULL nv_connector->native_mode [ Upstream commit 20a2ce87fbaf81e4c3dcb631d738e423959eb320 ] Add checking for NULL before calling nouveau_connector_detect_depth() in nouveau_connector_get_modes() function because nv_connector->native_mode could be dereferenced there since connector pointer passed to nouveau_connector_detect_depth() and the same value of nv_connector->native_mode is used there. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one") Signed-off-by: Natalia Petrova Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin commit edb970e03d65b699d20912df494521a60938feeb Author: Ratchanan Srirattanamet Date: Wed May 24 04:11:56 2023 +0700 drm/nouveau: don't detect DSM for non-NVIDIA device [ Upstream commit 11d24327c2d7ad7f24fcc44fb00e1fa91ebf6525 ] The call site of nouveau_dsm_pci_probe() uses single set of output variables for all invocations. So, we must not write anything to them unless it's an NVIDIA device. Otherwise, if we are called with another device after the NVIDIA device, we'll clober the result of the NVIDIA device. For example, if the other device doesn't have _PR3 resources, the detection later would miss the presence of power resource support, and the rest of the code will keep using Optimus DSM, breaking power management for that machine. Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run this detection on a non-NVIDIA device anyway. Thus, check at the beginning of the detection code if this is an NVIDIA card, and just return if it isn't. This, together with commit d22915d22ded ("drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and landed earlier, fixes runtime power management of the NVIDIA card in Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code will "timeout", sometimes hanging userspace. As a bonus, we'll also stop preventing _PR3 usage from the bridge for unrelated devices, which is always nice, I guess. Fixes: ccfc2d5cdb02 ("drm/nouveau: Use generic helper to check _PR3 presence") Signed-off-by: Ratchanan Srirattanamet Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/79 Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/DM6PR19MB2780805D4BE1E3F9B3AC96D0BC409@DM6PR19MB2780.namprd19.prod.outlook.com Signed-off-by: Sasha Levin commit 8c3446ab5902baef75e33761f2e3078751c75313 Author: Aleksandr Loktionov Date: Tue Apr 25 17:44:14 2023 +0200 igb: fix nvm.ops.read() error handling [ Upstream commit 48a821fd58837800750ec1b3962f0f799630a844 ] Add error handling into igb_set_eeprom() function, in case nvm.ops.read() fails just quit with error code asap. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit 221281d60c46d82b3ea7395fd857c641dcdab08c Author: Dan Carpenter Date: Fri Jun 9 14:05:19 2023 +0300 sctp: fix an error code in sctp_sf_eat_auth() [ Upstream commit 75e6def3b26736e7ff80639810098c9074229737 ] The sctp_sf_eat_auth() function is supposed to enum sctp_disposition values and returning a kernel error code will cause issues in the caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM. Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Dan Carpenter Acked-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5c47ed7f25d61b15890f3238c0e3c2f9699ca622 Author: Hangbin Liu Date: Fri Jun 9 17:15:02 2023 +0800 ipvlan: fix bound dev checking for IPv6 l3s mode [ Upstream commit ce57adc222aba32431c42632b396e9213d0eb0b8 ] The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu Reviewed-by: Larysa Zaremba Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 3c97f2c9ec29ce2f61772f6120aabc852f57132e Author: Saravanan Vajravel Date: Tue Jun 6 03:25:31 2023 -0700 IB/isert: Fix incorrect release of isert connection [ Upstream commit 699826f4e30ab76a62c238c86fbef7e826639c8d ] The ib_isert module is releasing the isert connection both in isert_wait_conn() handler as well as isert_free_conn() handler. In isert_wait_conn() handler, it is expected to wait for iSCSI session logout operation to complete. It should free the isert connection only in isert_free_conn() handler. When a bunch of iSER target is cleared, this issue can lead to use-after-free memory issue as isert conn is twice released Fixes: b02efbfc9a05 ("iser-target: Fix implicit termination of connections") Reviewed-by: Sagi Grimberg Signed-off-by: Saravanan Vajravel Signed-off-by: Selvin Xavier Link: https://lore.kernel.org/r/20230606102531.162967-4-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit da6ae4aab5a643cba39d229b05c1f0d8d6cc4dc6 Author: Saravanan Vajravel Date: Tue Jun 6 03:25:30 2023 -0700 IB/isert: Fix possible list corruption in CMA handler [ Upstream commit 7651e2d6c5b359a28c2d4c904fec6608d1021ca8 ] When ib_isert module receives connection error event, it is releasing the isert session and removes corresponding list node but it doesn't take appropriate mutex lock to remove the list node. This can lead to linked list corruption Fixes: bd3792205aae ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Signed-off-by: Selvin Xavier Signed-off-by: Saravanan Vajravel Link: https://lore.kernel.org/r/20230606102531.162967-3-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 2b6f8817ca66cd4c0acc663bb295f5d17a9f9d9b Author: Saravanan Vajravel Date: Tue Jun 6 03:25:29 2023 -0700 IB/isert: Fix dead lock in ib_isert [ Upstream commit 691b0480933f0ce88a81ed1d1a0aff340ff6293a ] - When a iSER session is released, ib_isert module is taking a mutex lock and releasing all pending connections. As part of this, ib_isert is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending CM events to CMA handler of ib_isert. This handler is taking same mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm modules. - For fix, created local list of pending connections and release the connection outside of mutex lock. Calltrace: --------- [ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds. [ 1229.791416] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791419] task:kworker/10:1 state:D stack: 0 pid: 642 ppid: 2 flags:0x80004000 [ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm] [ 1229.791436] Call Trace: [ 1229.791438] __schedule+0x2d1/0x830 [ 1229.791445] ? select_idle_sibling+0x23/0x6f0 [ 1229.791449] schedule+0x35/0xa0 [ 1229.791451] schedule_preempt_disabled+0xa/0x10 [ 1229.791453] __mutex_lock.isra.7+0x310/0x420 [ 1229.791456] ? select_task_rq_fair+0x351/0x990 [ 1229.791459] isert_cma_handler+0x224/0x330 [ib_isert] [ 1229.791463] ? ttwu_queue_wakelist+0x159/0x170 [ 1229.791466] cma_cm_event_handler+0x25/0xd0 [rdma_cm] [ 1229.791474] cma_ib_handler+0xa7/0x2e0 [rdma_cm] [ 1229.791478] cm_process_work+0x22/0xf0 [ib_cm] [ 1229.791483] cm_work_handler+0xf4/0xf30 [ib_cm] [ 1229.791487] ? move_linked_works+0x6e/0xa0 [ 1229.791490] process_one_work+0x1a7/0x360 [ 1229.791491] ? create_worker+0x1a0/0x1a0 [ 1229.791493] worker_thread+0x30/0x390 [ 1229.791494] ? create_worker+0x1a0/0x1a0 [ 1229.791495] kthread+0x10a/0x120 [ 1229.791497] ? set_kthread_struct+0x40/0x40 [ 1229.791499] ret_from_fork+0x1f/0x40 [ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds. [ 1229.791740] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791742] task:targetcli state:D stack: 0 pid:28666 ppid: 5510 flags:0x00004080 [ 1229.791743] Call Trace: [ 1229.791744] __schedule+0x2d1/0x830 [ 1229.791746] schedule+0x35/0xa0 [ 1229.791748] schedule_preempt_disabled+0xa/0x10 [ 1229.791749] __mutex_lock.isra.7+0x310/0x420 [ 1229.791751] rdma_destroy_id+0x15/0x20 [rdma_cm] [ 1229.791755] isert_connect_release+0x115/0x130 [ib_isert] [ 1229.791757] isert_free_np+0x87/0x140 [ib_isert] [ 1229.791761] iscsit_del_np+0x74/0x120 [iscsi_target_mod] [ 1229.791776] lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod] [ 1229.791784] configfs_write_file+0xb2/0x110 [ 1229.791788] vfs_write+0xa5/0x1a0 [ 1229.791792] ksys_write+0x4f/0xb0 [ 1229.791794] do_syscall_64+0x5b/0x1a0 [ 1229.791798] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: bd3792205aae ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Reviewed-by: Sagi Grimberg Signed-off-by: Selvin Xavier Signed-off-by: Saravanan Vajravel Link: https://lore.kernel.org/r/20230606102531.162967-2-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 2f9d26345c6eb3521724d04328d6c25560b2e409 Author: Yishai Hadas Date: Mon Jun 5 13:33:25 2023 +0300 IB/uverbs: Fix to consider event queue closing also upon non-blocking mode [ Upstream commit 62fab312fa1683e812e605db20d4f22de3e3fb2f ] Fix ib_uverbs_event_read() to consider event queue closing also upon non-blocking mode. Once the queue is closed (e.g. hot-plug flow) all the existing events are cleaned-up as part of ib_uverbs_free_event_queue(). An application that uses the non-blocking FD mode should get -EIO in that case to let it knows that the device was removed already. Otherwise, it can loose the indication that the device was removed and won't recover. As part of that, refactor the code to have a single flow with regards to 'is_closed' for both blocking and non-blocking modes. Fixes: 14e23bd6d221 ("RDMA/core: Fix locking in ib_uverbs_event_read") Reviewed-by: Maor Gottlieb Signed-off-by: Yishai Hadas Link: https://lore.kernel.org/r/97b00116a1e1e13f8dc4ec38a5ea81cf8c030210.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 6cccdbc9f09c76925e3c01570676354b0e9178fb Author: Mark Zhang Date: Mon Jun 5 13:33:23 2023 +0300 RDMA/cma: Always set static rate to 0 for RoCE [ Upstream commit 58030c76cce473b6cfd630bbecb97215def0dff8 ] Set static rate to 0 as it should be discovered by path query and has no meaning for RoCE. This also avoid of using the rtnl lock and ethtool API, which is a bottleneck when try to setup many rdma-cm connections at the same time, especially with multiple processes. Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices") Signed-off-by: Mark Zhang Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit f49abbb274162637f6af440a0979005e35d16ce3 Author: Maher Sanalla Date: Mon Jun 5 13:33:17 2023 +0300 RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions [ Upstream commit ee4d269eccfea6c17b18281bef482700d898e86f ] Delay drop data is initiated for PFs that have the capability of rq_delay_drop and are in roce profile. However, PFs with RAW ethernet profile do not initiate delay drop data on function load, causing kernel panic if delay drop struct members are accessed later on in case a dropless RQ is created. Thus, stage the delay drop initialization as part of RAW ethernet PF loading process. Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support") Signed-off-by: Maher Sanalla Reviewed-by: Maor Gottlieb Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit aa277d5cd4b2b11d1f2aa4e5b689aa11e4e22c35 Author: Satha Rao Date: Thu Jun 8 17:12:00 2023 +0530 octeontx2-af: fixed resource availability check [ Upstream commit 4e635f9d86165e47f5440196f2ebdb258efb8341 ] txschq_alloc response have two different arrays to store continuous and non-continuous schedulers of each level. Requested count should be checked for each array separately. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Satha Rao Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: Naveen Mamindlapalli Reviewed-by: Sridhar Samudrala Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 0fb48a2a6ad4faa48cbf4ff372c40447d60fdf9f Author: Ahmed Zaki Date: Thu Jun 8 13:02:26 2023 -0700 iavf: remove mask from iavf_irq_enable_queues() [ Upstream commit c37cf54c12cfaa51e7aaf88708167b0d3259e64e ] Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ahmed Zaki Tested-by: Rafal Romanowski Reviewed-by: Simon Horman Reviewed-by: Maciej Fijalkowski Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 079a9591ee182b0fccf67877cec9312087940087 Author: Zhu Yanjun Date: Fri Jun 2 11:54:08 2023 +0800 RDMA/rxe: Fix the use-before-initialization error of resp_pkts [ Upstream commit 2a62b6210ce876c596086ab8fd4c8a0c3d10611a ] In the following: Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:982 [inline] register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295 __lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951 lock_acquire kernel/locking/lockdep.c:5691 [inline] lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5656 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 skb_dequeue+0x20/0x180 net/core/skbuff.c:3639 drain_resp_pkts drivers/infiniband/sw/rxe/rxe_comp.c:555 [inline] rxe_completer+0x250d/0x3cc0 drivers/infiniband/sw/rxe/rxe_comp.c:652 rxe_qp_do_cleanup+0x1be/0x820 drivers/infiniband/sw/rxe/rxe_qp.c:761 execute_in_process_context+0x3b/0x150 kernel/workqueue.c:3473 __rxe_cleanup+0x21e/0x370 drivers/infiniband/sw/rxe/rxe_pool.c:233 rxe_create_qp+0x3f6/0x5f0 drivers/infiniband/sw/rxe/rxe_verbs.c:583 This is a use-before-initialization problem. It happens because rxe_qp_do_cleanup is called during error unwind before the struct has been fully initialized. Move the initialization of the skb earlier. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20230602035408.741534-1-yanjun.zhu@intel.com Reported-by: syzbot+eba589d8f49c73d356da@syzkaller.appspotmail.com Signed-off-by: Zhu Yanjun Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 089a0e831f68df032926a9e68ca8a3bb2946d2fa Author: Bob Pearson Date: Fri Oct 21 15:01:04 2022 -0500 RDMA/rxe: Removed unused name from rxe_task struct [ Upstream commit de669ae8af49ceed0eed44f5b3d51dc62affc5e4 ] The name field in struct rxe_task is never used. This patch removes it. Link: https://lore.kernel.org/r/20221021200118.2163-4-rpearsonhpe@gmail.com Signed-off-by: Ian Ziemba Signed-off-by: Bob Pearson Signed-off-by: Jason Gunthorpe Stable-dep-of: 2a62b6210ce8 ("RDMA/rxe: Fix the use-before-initialization error of resp_pkts") Signed-off-by: Sasha Levin commit 6205c0d9ff8b03603491af6b99160bc1f8134055 Author: Zhu Yanjun Date: Sun Aug 21 21:16:15 2022 -0400 RDMA/rxe: Remove the unused variable obj [ Upstream commit f07853582d1f6ed282f8d9a0b1209a87dd761f58 ] The member variable obj in struct rxe_task is not needed. So remove it to save memory. Link: https://lore.kernel.org/r/20220822011615.805603-4-yanjun.zhu@linux.dev Signed-off-by: Zhu Yanjun Reviewed-by: Li Zhijian Reviewed-by: Bob Pearson Signed-off-by: Leon Romanovsky Stable-dep-of: 2a62b6210ce8 ("RDMA/rxe: Fix the use-before-initialization error of resp_pkts") Signed-off-by: Sasha Levin commit af6eaa57986e82d7efd81984ee607927c6de61e4 Author: Lee Jones Date: Thu Jun 8 08:29:03 2023 +0100 net/sched: cls_u32: Fix reference counter leak leading to overflow [ Upstream commit 04c55383fa5689357bcdd2c8036725a55ed632bc ] In the event of a failure in tcf_change_indev(), u32_set_parms() will immediately return without decrementing the recently incremented reference counter. If this happens enough times, the counter will rollover and the reference freed, leading to a double free which can be used to do 'bad things'. In order to prevent this, move the point of possible failure above the point where the reference counter is incremented. Also save any meaningful return values to be applied to the return data at the appropriate point in time. This issue was caught with KASAN. Fixes: 705c7091262d ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct") Suggested-by: Eric Dumazet Signed-off-by: Lee Jones Reviewed-by: Eric Dumazet Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5852d17aaa8b0c4aef497aabe91052ff6ceebce8 Author: Guillaume Nault Date: Wed Jun 7 18:05:02 2023 +0200 ping6: Fix send to link-local addresses with VRF. [ Upstream commit 91ffd1bae1dafbb9e34b46813f5b058581d9144d ] Ping sockets can't send packets when they're bound to a VRF master device and the output interface is set to a slave device. For example, when net.ipv4.ping_group_range is properly set, so that ping6 can use ping sockets, the following kind of commands fails: $ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1 What happens is that sk->sk_bound_dev_if is set to the VRF master device, but 'oif' is set to the real output device. Since both are set but different, ping_v6_sendmsg() sees their value as inconsistent and fails. Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if. This fixes the following kselftest failure: $ ./fcnal-test.sh -t ipv6_ping [...] TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL] Reported-by: Mirsad Todorovac Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/ Tested-by: Mirsad Todorovac Fixes: 5e457896986e ("net: ipv6: Fix ping to link-local addresses.") Signed-off-by: Guillaume Nault Reviewed-by: David Ahern Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9e666a77f00850ba7e47eea14c04c55293cd7ebd Author: Wei Fang Date: Wed Jun 7 17:10:48 2023 +0800 net: enetc: correct the indexes of highest and 2nd highest TCs [ Upstream commit 21225873be1472b7c59ed3650396af0e40578112 ] For ENETC hardware, the TCs are numbered from 0 to N-1, where N is the number of TCs. Numerically higher TC has higher priority. It's obvious that the highest priority TC index should be N-1 and the 2nd highest priority TC index should be N-2. However, the previous logic uses netdev_get_prio_tc_map() to get the indexes of highest priority and 2nd highest priority TCs, it does not make sense and is incorrect to give a "tc" argument to netdev_get_prio_tc_map(). So the driver may get the wrong indexes of the two highest priotiry TCs which would lead to failed to set the CBS for the two highest priotiry TCs. e.g. $ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \ map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1 $ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \ sendslope -900000 hicredit 12 locredit -113 offload 1 $ Error: Specified device failed to setup cbs hardware offload. ^^^^^ In this example, the previous logic deems the indexes of the two highest priotiry TCs should be 3 and 2. Actually, the indexes are 5 and 4, because the number of TCs is 6. So it would be failed to configure the CBS for the two highest priority TCs. Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Wei Fang Reviewed-by: Vladimir Oltean Reviewed-by: Maciej Fijalkowski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1200af82cf0bbf28a608905c9e9be7bf37c00c98 Author: Pablo Neira Ayuso Date: Thu Jun 8 00:19:12 2023 +0200 netfilter: nfnetlink: skip error delivery on batch in case of ENOMEM [ Upstream commit a1a64a151dae8ac3581c1cbde44b672045cb658b ] If caller reports ENOMEM, then stop iterating over the batch and send a single netlink message to userspace to report OOM. Fixes: cbb8125eb40b ("netfilter: nfnetlink: deliver netlink errors on batch completion") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit af42c4fd827ce46c454a8503702381338245eb17 Author: Vladimir Oltean Date: Tue May 30 01:34:02 2023 +0300 spi: fsl-dspi: avoid SCK glitches with continuous transfers [ Upstream commit c5c31fb71f16ba75bad4ade208abbae225305b65 ] The DSPI controller has configurable timing for (a) tCSC: the interval between the assertion of the chip select and the first clock edge (b) tASC: the interval between the last clock edge and the deassertion of the chip select What is a bit surprising, but is documented in the figure "Example of continuous transfer (CPHA=1, CONT=1)" in the datasheet, is that when the chip select stays asserted between multiple TX FIFO writes, the tCSC and tASC times still apply. With CONT=1, chip select remains asserted, but SCK takes a break and goes to the idle state for tASC + tCSC ns. In other words, the default values (of 0 and 0 ns) result in SCK glitches where the SCK transition to the idle state, as well as the SCK transition from the idle state, will have no delay in between, and it may appear that a SCK cycle has simply gone missing. The resulting timing violation might cause data corruption in many peripherals, as their chip select is asserted. The driver has device tree bindings for tCSC ("fsl,spi-cs-sck-delay") and tASC ("fsl,spi-sck-cs-delay"), but these are only specified to apply when the chip select toggles in the first place, and this timing characteristic depends on each peripheral. Many peripherals do not have explicit timing requirements, so many device trees do not have these properties present at all. Nonetheless, the lack of SCK glitches is a common sense requirement, and since the SCK stays in the idle state during transfers for tCSC+tASC ns, and that in itself should look like half a cycle, then let's ensure that tCSC and tASC are at least a quarter of a SCK period, such that their sum is at least half of one. Fixes: 95bf15f38641 ("spi: fsl-dspi: Add ~50ns delay between cs and sck") Reported-by: Lisa Chen (陈敏捷) Debugged-by: Lisa Chen (陈敏捷) Tested-by: Lisa Chen (陈敏捷) Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230529223402.1199503-1-vladimir.oltean@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit cb6ec51ddd00aa8768e0b7d24a8d3b189bf52837 Author: Li Zhijian Date: Tue Apr 25 01:02:42 2023 +0000 RDMA/rtrs: Fix the last iu->buf leak in err path [ Upstream commit 3bf3a7c6985c625f64e73baefdaa36f1c2045a29 ] The last iu->buf will leak if ib_dma_mapping_error() fails. Fixes: c0894b3ea69d ("RDMA/rtrs: core: lib functions shared between client and server modules") Link: https://lore.kernel.org/r/1682384563-2-3-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian Acked-by: Guoqing Jiang Acked-by: Jack Wang Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 26293251ab641f16ee7a4f9ded2e2504044979a8 Author: Elson Roy Serrao Date: Thu Jun 1 14:27:30 2023 -0700 usb: dwc3: gadget: Reset num TRBs before giving back the request commit 00f8205ffcf112dcef14f8151d78075d38d22c08 upstream. Consider a scenario where cable disconnect happens when there is an active usb reqest queued to the UDC. As part of the disconnect we would issue an end transfer with no interrupt-on-completion before giving back this request. Since we are giving back the request without skipping TRBs the num_trbs field of dwc3_request still holds the stale value previously used. Function drivers re-use same request for a given bind-unbind session and hence their dwc3_request context gets preserved across cable disconnect/connect. When such a request gets re-queued after cable connect, we would increase the num_trbs field on top of the previous stale value thus incorrectly representing the number of TRBs used. Fix this by resetting num_trbs field before giving back the request. Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request") Cc: stable Signed-off-by: Elson Roy Serrao Acked-by: Thinh Nguyen Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com> Signed-off-by: Greg Kroah-Hartman commit f4bc416942898bc789c4f05b306213164e0440bb Author: Bernhard Seibold Date: Fri Jun 2 15:30:29 2023 +0200 serial: lantiq: add missing interrupt ack commit 306320034e8fbe7ee1cc4f5269c55658b4612048 upstream. Currently, the error interrupt is never acknowledged, so once active it will stay active indefinitely, causing the handler to be called in an infinite loop. Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: Signed-off-by: Bernhard Seibold Reviewed-by: Ilpo Järvinen Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman commit 0b6e65016c3c56c8db0d79a560ed6f4bf9166349 Author: Jerry Meng Date: Wed May 31 11:51:16 2023 +0800 USB: serial: option: add Quectel EM061KGL series commit f1832e2b5e498e258b090af3b065b85cf8cc5161 upstream. Add support for Quectel EM061KGL series which are based on Qualcomm SDX12 chip: EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL Above products use the exact same interface layout and option driver is for interfaces DIAG, NMEA and AT. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6008 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM061K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 1c004b379b0327992c1713334198cf5eba29a4ba Author: Stephen Hemminger Date: Wed Aug 17 17:43:21 2022 -0700 Remove DECnet support from kernel commit 1202cdd665315c525b5237e96e0bedc76d7e754f upstream. DECnet is an obsolete network protocol that receives more attention from kernel janitors than users. It belongs in computer protocol history museum not in Linux kernel. It has been "Orphaned" in kernel since 2010. The iproute2 support for DECnet was dropped in 5.0 release. The documentation link on Sourceforge says it is abandoned there as well. Leave the UAPI alone to keep userspace programs compiling. This means that there is still an empty neighbour table for AF_DECNET. The table of /proc/sys/net entries was updated to match current directories and reformatted to be alphabetical. Signed-off-by: Stephen Hemminger Acked-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e9d384983fa94eecb0320feeb91577104607ac65 Author: Edson Juliano Drosdeck Date: Fri Jun 9 17:10:58 2023 -0300 ALSA: hda/realtek: Add a quirk for Compaq N14JP6 commit a2a871483161014f1bcc4e9a04354b01aa77cedb upstream. Add a quirk for Compaq N14JP6 to fixup ALC897 headset MIC no sound. Signed-off-by: Edson Juliano Drosdeck Cc: Link: https://lore.kernel.org/r/20230609201058.523499-1-edson.drosdeck@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 1148d4ca3029d85bff60f975fabc66716584852c Author: Wes Huang Date: Thu Jun 8 11:01:42 2023 +0800 net: usb: qmi_wwan: add support for Compal RXM-G1 commit 863199199713908afaa47ba09332b87621c12496 upstream. Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Wes Huang Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d7acfd522560744ee3cf848ab16319592afdf416 Author: Edward Srouji Date: Mon Jun 5 13:33:24 2023 +0300 RDMA/uverbs: Restrict usage of privileged QKEYs commit 0cadb4db79e1d9eea66711c4031e435c2191907e upstream. According to the IB specification rel-1.6, section 3.5.3: "QKEYs with the most significant bit set are considered controlled QKEYs, and a HCA does not allow a consumer to arbitrarily specify a controlled QKEY." Thus, block non-privileged users from setting such a QKEY. Cc: stable@vger.kernel.org Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation") Signed-off-by: Edward Srouji Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 96e14c91c5301c2aad0de1ec8eee3dd4f031d96d Author: Dave Airlie Date: Thu Jun 15 12:22:11 2023 +1000 nouveau: fix client work fence deletion race commit c8a5d5ea3ba6a18958f8d76430e4cd68eea33943 upstream. This seems to have existed for ever but is now more apparant after commit 9bff18d13473 ("drm/ttm: use per BO cleanup workers") My analysis: two threads are running, one in the irq signalling the fence, in dma_fence_signal_timestamp_locked, it has done the DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the callbacks. The second thread in nouveau_cli_work_ready, where it sees the fence is signalled, so then puts the fence, cleanups the object and frees the work item, which contains the callback. Thread one goes again and tries to call the callback and causes the use-after-free. Proposed fix: lock the fence signalled check in nouveau_cli_work_ready, so either the callbacks are done or the memory is freed. Reviewed-by: Karol Herbst Fixes: 11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler") Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/ Signed-off-by: Greg Kroah-Hartman commit f1f7117b22369977cdb771e95f3feabe4e68b5e3 Author: Ricardo Ribalda Date: Fri May 19 16:47:38 2023 +0200 powerpc/purgatory: remove PGO flags commit 20188baceb7a1463dc0bcb0c8678b69c2f447df6 upstream. If profile-guided optimization is enabled, the purgatory ends up with multiple .text sections. This is not supported by kexec and crashes the system. Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory") Signed-off-by: Ricardo Ribalda Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Christophe Leroy Cc: Cc: Albert Ou Cc: Baoquan He Cc: Borislav Petkov (AMD) Cc: Dave Hansen Cc: Dave Young Cc: Eric W. Biederman Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Palmer Dabbelt Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Philipp Rudo Cc: Ross Zwisler Cc: Simon Horman Cc: Steven Rostedt (Google) Cc: Thomas Gleixner Cc: Tom Rix Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 26c80741ceb689f3789086407516edab99faed3b Author: Ricardo Ribalda Date: Fri May 19 16:47:37 2023 +0200 x86/purgatory: remove PGO flags commit 97b6b9cbba40a21c1d9a344d5c1991f8cfbf136e upstream. If profile-guided optimization is enabled, the purgatory ends up with multiple .text sections. This is not supported by kexec and crashes the system. Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory") Signed-off-by: Ricardo Ribalda Cc: Cc: Albert Ou Cc: Baoquan He Cc: Borislav Petkov (AMD) Cc: Christophe Leroy Cc: Dave Hansen Cc: Dave Young Cc: Eric W. Biederman Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Michael Ellerman Cc: Nathan Chancellor Cc: Nicholas Piggin Cc: Nick Desaulniers Cc: Palmer Dabbelt Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Philipp Rudo Cc: Ross Zwisler Cc: Simon Horman Cc: Steven Rostedt (Google) Cc: Thomas Gleixner Cc: Tom Rix Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit f368aed4827bd4276c0e3664fb2cb815a8d7caf3 Author: Ricardo Ribalda Date: Fri May 19 16:47:36 2023 +0200 kexec: support purgatories with .text.hot sections commit 8652d44f466ad5772e7d1756e9457046189b0dfc upstream. Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7. When upreving llvm I realised that kexec stopped working on my test platform. The reason seems to be that due to PGO there are multiple .text sections on the purgatory, and kexec does not supports that. This patch (of 4): Clang16 links the purgatory text in two sections when PGO is in use: [ 1] .text PROGBITS 0000000000000000 00000040 00000000000011a1 0000000000000000 AX 0 0 16 [ 2] .rela.text RELA 0000000000000000 00003498 0000000000000648 0000000000000018 I 24 1 8 ... [17] .text.hot. PROGBITS 0000000000000000 00003220 000000000000020b 0000000000000000 AX 0 0 1 [18] .rela.text.hot. RELA 0000000000000000 00004428 0000000000000078 0000000000000018 I 24 17 8 And both of them have their range [sh_addr ... sh_addr+sh_size] on the area pointed by `e_entry`. This causes that image->start is calculated twice, once for .text and another time for .text.hot. The second calculation leaves image->start in a random location. Because of this, the system crashes immediately after: kexec_core: Starting new kernel Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory") Signed-off-by: Ricardo Ribalda Reviewed-by: Ross Zwisler Reviewed-by: Steven Rostedt (Google) Reviewed-by: Philipp Rudo Cc: Albert Ou Cc: Baoquan He Cc: Borislav Petkov (AMD) Cc: Christophe Leroy Cc: Dave Hansen Cc: Dave Young Cc: Eric W. Biederman Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Michael Ellerman Cc: Nathan Chancellor Cc: Nicholas Piggin Cc: Nick Desaulniers Cc: Palmer Dabbelt Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Simon Horman Cc: Thomas Gleixner Cc: Tom Rix Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 7e78b9142fdf7dffe62534b48bcf43734247de40 Author: Ryusuke Konishi Date: Wed May 24 18:43:48 2023 +0900 nilfs2: fix possible out-of-bounds segment allocation in resize ioctl commit fee5eaecca86afa544355569b831c1f90f334b85 upstream. Syzbot reports that in its stress test for resize ioctl, the log writing function nilfs_segctor_do_construct hits a WARN_ON in nilfs_segctor_truncate_segments(). It turned out that there is a problem with the current implementation of the resize ioctl, which changes the writable range on the device (the range of allocatable segments) at the end of the resize process. This order is necessary for file system expansion to avoid corrupting the superblock at trailing edge. However, in the case of a file system shrink, if log writes occur after truncating out-of-bounds trailing segments and before the resize is complete, segments may be allocated from the truncated space. The userspace resize tool was fine as it limits the range of allocatable segments before performing the resize, but it can run into this issue if the resize ioctl is called alone. Fix this issue by changing nilfs_sufile_resize() to update the range of allocatable segments immediately after successful truncation of segment space in case of file system shrink. Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com Fixes: 4e33f9eab07e ("nilfs2: implement resize ioctl") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.com Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 902fcec05295a66370f7b15822243d7898bf7b46 Author: Ryusuke Konishi Date: Sat May 13 19:24:28 2023 +0900 nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key() commit 2f012f2baca140c488e43d27a374029c1e59098d upstream. A syzbot fault injection test reported that nilfs_btnode_create_block, a helper function that allocates a new node block for b-trees, causes a kernel BUG for disk images where the file system block size is smaller than the page size. This was due to unexpected flags on the newly allocated buffer head, and it turned out to be because the buffer flags were not cleared by nilfs_btnode_abort_change_key() after an error occurred during a b-tree update operation and the buffer was later reused in that state. Fix this issue by using nilfs_btnode_delete() to abandon the unused preallocated buffer in nilfs_btnode_abort_change_key(). Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.com Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit d59293f082dcccef2208716bcf95ce6b8de5341d Author: Janne Grunau Date: Sun Feb 12 13:16:32 2023 +0100 nios2: dts: Fix tse_mac "max-frame-size" property commit 85041e12418fd0c08ff972b7729f7971afb361f8 upstream. The given value of 1518 seems to refer to the layer 2 ethernet frame size without 802.1Q tag. Actual use of the "max-frame-size" including in the consumer of the "altr,tse-1.0" compatible is the MTU. Fixes: 95acd4c7b69c ("nios2: Device tree support") Fixes: 61c610ec61bb ("nios2: Add Max10 device tree") Cc: Signed-off-by: Janne Grunau Signed-off-by: Dinh Nguyen Signed-off-by: Greg Kroah-Hartman commit 2847d9eed48b9936d52f5fc524a4e6f4916ba2af Author: Luís Henriques Date: Mon May 29 16:26:45 2023 +0100 ocfs2: check new file size on fallocate call commit 26a6ffff7de5dd369cdb12e38ba11db682f1dec0 upstream. When changing a file size with fallocate() the new size isn't being checked. In particular, the FSIZE ulimit isn't being checked, which makes fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes this issue. Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de Signed-off-by: Luís Henriques Reviewed-by: Mark Fasheh Reviewed-by: Joseph Qi Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit e73b135f540c76e868c515ab6fbcda525185d3ea Author: Luís Henriques Date: Mon May 22 11:21:12 2023 +0100 ocfs2: fix use-after-free when unmounting read-only filesystem commit 50d927880e0f90d5cb25e897e9d03e5edacc79a8 upstream. It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using fstest generic/452. After a read-only remount, quotas are suspended and ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting the filesystem, an UAF access to the oinfo will eventually cause a crash. BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0 Read of size 8 at addr ffff8880389a8208 by task umount/669 ... Call Trace: ... timer_delete+0x54/0xc0 try_to_grab_pending+0x31/0x230 __cancel_work_timer+0x6c/0x270 ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2] ocfs2_dismount_volume+0xdd/0x450 [ocfs2] generic_shutdown_super+0xaa/0x280 kill_block_super+0x46/0x70 deactivate_locked_super+0x4d/0xb0 cleanup_mnt+0x135/0x1f0 ... Allocated by task 632: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8b/0x90 ocfs2_local_read_info+0xe3/0x9a0 [ocfs2] dquot_load_quota_sb+0x34b/0x680 dquot_load_quota_inode+0xfe/0x1a0 ocfs2_enable_quotas+0x190/0x2f0 [ocfs2] ocfs2_fill_super+0x14ef/0x2120 [ocfs2] mount_bdev+0x1be/0x200 legacy_get_tree+0x6c/0xb0 vfs_get_tree+0x3e/0x110 path_mount+0xa90/0xe10 __x64_sys_mount+0x16f/0x1a0 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 650: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0xf9/0x150 __kmem_cache_free+0x89/0x180 ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2] dquot_disable+0x35f/0xa70 ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2] ocfs2_remount+0x150/0x580 [ocfs2] reconfigure_super+0x1a5/0x3a0 path_mount+0xc8a/0xe10 __x64_sys_mount+0x16f/0x1a0 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de Signed-off-by: Luís Henriques Reviewed-by: Joseph Qi Tested-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 370f5d98ffe58a95e31506390bc0704b9ddb05d4 Author: Benjamin Segall Date: Tue May 30 11:32:28 2023 -0700 epoll: ep_autoremove_wake_function should use list_del_init_careful commit 2192bba03d80f829233bfa34506b428f71e531e7 upstream. autoremove_wake_function uses list_del_init_careful, so should epoll's more aggressive variant. It only doesn't because it was copied from an older wait.c rather than the most recent. [bsegall@google.com: add comment] Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com Fixes: a16ceb139610 ("epoll: autoremove wakers even more aggressively") Signed-off-by: Ben Segall Cc: Al Viro Cc: Christian Brauner Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 4716c73b188566865bdd79c3a6709696a224ac04 Author: Jens Axboe Date: Fri Jun 16 21:12:06 2023 -0600 io_uring: hold uring mutex around poll removal Snipped from commit 9ca9fb24d5febccea354089c41f96a8ad0d853f8 upstream. While reworking the poll hashing in the v6.0 kernel, we ended up grabbing the ctx->uring_lock in poll update/removal. This also fixed a bug with linked timeouts racing with timeout expiry and poll removal. Bring back just the locking fix for that. Reported-and-tested-by: Querijn Voet Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 93a68acc497bf59d523761ae40f348ded413c744 Author: Marc Zyngier Date: Tue May 30 11:01:22 2023 +0100 irqchip/gic: Correctly validate OF quirk descriptors [ Upstream commit 91539341a3b6e9c868024a4292455dae36e6f58c ] When checking for OF quirks, make sure either 'compatible' or 'property' is set, and give up otherwise. This avoids non-OF quirks being randomly applied as they don't have any of the OF data that need checking. Cc: Douglas Anderson Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Fixes: 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues") Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin commit 2a2641a842eac11abd906eafa90e76b20afe32e8 Author: Sukrut Bellary Date: Wed May 3 16:15:07 2023 -0700 drm:amd:amdgpu: Fix missing buffer object unlock in failure path [ Upstream commit 60ecaaf54886b0642d5c4744f7fbf1ff0d6b3e42 ] smatch warning - 1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. 2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. Signed-off-by: Sukrut Bellary Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 7c0b17679b4300cebd7604ec1e7103746158dd58 Author: Ross Lagerwall Date: Wed Apr 26 17:40:05 2023 +0100 xen/blkfront: Only check REQ_FUA for writes [ Upstream commit b6ebaa8100090092aa602530d7e8316816d0c98d ] The existing code silently converts read operations with the REQ_FUA bit set into write-barrier operations. This results in data loss as the backend scribbles zeroes over the data instead of returning it. While the REQ_FUA bit doesn't make sense on a read operation, at least one well-known out-of-tree kernel module does set it and since it results in data loss, let's be safe here and only look at REQ_FUA for writes. Signed-off-by: Ross Lagerwall Acked-by: Juergen Gross Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit 8e45fb70f4b56659b9ad34113d7fe089e984d6c9 Author: Maxim Kochetkov Date: Fri May 12 14:03:42 2023 +0300 ASoC: dwc: move DMA init to snd_soc_dai_driver probe() [ Upstream commit 011a8719d6105dcb48077ea7a6a88ac019d4aa50 ] When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [] snd_soc_component_open+0x1a/0x68 [ 396.592439] [] __soc_pcm_open+0xf0/0x502 [ 396.598217] [] soc_pcm_open+0x2e/0x4e [ 396.603741] [] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [] snd_pcm_open+0xfa/0x212 [ 396.615868] [] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [] snd_open+0xa8/0x17a [ 396.627421] [] chrdev_open+0xa0/0x218 [ 396.632893] [] do_dentry_open+0x17c/0x2a6 [ 396.638713] [] vfs_open+0x1e/0x26 [ 396.643850] [] path_openat+0x96e/0xc96 [ 396.649518] [] do_filp_open+0x7c/0xf6 [ 396.655034] [] do_sys_openat2+0x8a/0x11e [ 396.660765] [] sys_openat+0x50/0x7c [ 396.666068] [] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit d47b5a6d233196ccbdc6791e99d6a70cc2938968 Author: Liviu Dudau Date: Tue May 9 18:29:21 2023 +0100 mips: Move initrd_start check after initrd address sanitisation. [ Upstream commit 4897a898a216058dec55e5e5902534e6e224fcdf ] PAGE_OFFSET is technically a virtual address so when checking the value of initrd_start against it we should make sure that it has been sanitised from the values passed by the bootloader. Without this change, even with a bootloader that passes correct addresses for an initrd, we are failing to load it on MT7621 boards, for example. Signed-off-by: Liviu Dudau Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 619672bf2d04cdc1bc3925defd0312c2ef11e5d0 Author: Manuel Lauss Date: Thu May 11 17:30:10 2023 +0200 MIPS: Alchemy: fix dbdma2 [ Upstream commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 ] Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code: - skip cache invalidation if chip has working coherency circuitry. - invalidate KSEG0-portion of the (physical) data address. - force the dma channel doorbell write out to bus immediately with a sync. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 0ca73b45b767822f1c59c77caefd93e2460778d4 Author: Helge Deller Date: Wed May 17 15:54:40 2023 +0200 parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory() [ Upstream commit d703797380c540bbeac03f104ebcfc364eaf47cc ] Flush caches after changing gatt entries and calculate entry according to SBA requirements. Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit 3f7625e0862050dbeb00396d57a44b98103d8c47 Author: Helge Deller Date: Wed May 17 15:52:30 2023 +0200 parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu() [ Upstream commit 59fa12646d9f56c842b4d5b6418ed77af625c588 ] Add comment in arch_sync_dma_for_device() and handle the direction flag in arch_sync_dma_for_cpu(). When receiving data from the device (DMA_FROM_DEVICE) unconditionally purge the data cache in arch_sync_dma_for_cpu(). Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit 73102fdb5bf3d7c8582d9388b68f96c6bef4665f Author: Ranjani Sridharan Date: Wed May 17 13:57:31 2023 -0500 ASoC: soc-pcm: test if a BE can be prepared [ Upstream commit e123036be377ddf628226a7c6d4f9af5efd113d3 ] In the BE hw_params configuration, the existing code checks if any of the existing FEs are prepared, running, paused or suspended - and skips the configuration in those cases. This allows multiple calls of hw_params which the ALSA state machine supports. This check is not handled for the prepare stage, which can lead to the same BE being prepared multiple times. This patch adds a check similar to that of the hw_params, with the main difference being that the suspended state is allowed: the ALSA state machine allows a transition from suspended to prepared with hw_params skipped. This problem was detected on Intel IPC4/SoundWire devices, where the BE dailink .prepare stage is used to configure the SoundWire stream with a bank switch. Multiple .prepare calls lead to conflicts with the .trigger operation with IPC4 configurations. This problem was not detected earlier on Intel devices, HDaudio BE dailinks detect that the link is already prepared and skip the configuration, and for IPC3 devices there is no BE trigger. Link: https://github.com/thesofproject/sof/issues/7596 Signed-off-by: Ranjani Sridharan commit 3bc883132d03c3a8daf1794ef0c2fa8067e5fe1d Author: Johannes Thumshirn Date: Thu May 4 13:58:13 2023 +0200 btrfs: handle memory allocation failure in btrfs_csum_one_bio [ Upstream commit 806570c0bb7b4847828c22c4934fcf2dc8fc572f ] Since f8a53bb58ec7 ("btrfs: handle checksum generation in the storage layer") the failures of btrfs_csum_one_bio() are handled via bio_end_io(). This means, we can return BLK_STS_RESOURCE from btrfs_csum_one_bio() in case the allocation of the ordered sums fails. This also fixes a syzkaller report, where injecting a failure into the kvzalloc() call results in a BUG_ON(). Reported-by: syzbot+d8941552e21eac774778@syzkaller.appspotmail.com Reviewed-by: Christoph Hellwig Reviewed-by: Anand Jain Signed-off-by: Johannes Thumshirn Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 142fbad3140553ad357d231cfbe79ac55c8ff055 Author: Qu Wenruo Date: Thu Apr 13 13:57:17 2023 +0800 btrfs: scrub: try harder to mark RAID56 block groups read-only [ Upstream commit 7561551e7ba870b9659083b95feb520fb2dacce3 ] Currently we allow a block group not to be marked read-only for scrub. But for RAID56 block groups if we require the block group to be read-only, then we're allowed to use cached content from scrub stripe to reduce unnecessary RAID56 reads. So this patch would: - Make btrfs_inc_block_group_ro() try harder During my tests, for cases like btrfs/061 and btrfs/064, we can hit ENOSPC from btrfs_inc_block_group_ro() calls during scrub. The reason is if we only have one single data chunk, and trying to scrub it, we won't have any space left for any newer data writes. But this check should be done by the caller, especially for scrub cases we only temporarily mark the chunk read-only. And newer data writes would always try to allocate a new data chunk when needed. - Return error for scrub if we failed to mark a RAID56 chunk read-only Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 35d32d841592b5ac6b12a2359730ef6c7dd58edc Author: Mario Limonciello Date: Tue May 16 13:25:40 2023 -0500 power: supply: Fix logic checking if system is running from battery [ Upstream commit 95339f40a8b652b5b1773def31e63fc53c26378a ] The logic used for power_supply_is_system_supplied() counts all power supplies and assumes that the system is running from AC if there is either a non-battery power-supply reporting to be online or if no power-supplies exist at all. The second rule is for desktop systems, that don't have any battery/charger devices. These systems will incorrectly report to be powered from battery once a device scope power-supply is registered (e.g. a HID device), since these power-supplies increase the counter. Apart from HID devices, recent dGPUs provide UCSI power supplies on a desktop systems. The dGPU by default doesn't have anything plugged in so it's 'offline'. This makes power_supply_is_system_supplied() return 0 with a count of 1 meaning all drivers that use this get a wrong judgement. To fix this case adjust the logic to also examine the scope of the power supply. If the power supply is deemed a device power supply, then don't count it. Cc: Evan Quan Suggested-by: Lijo Lazar Signed-off-by: Mario Limonciello Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 8b7a2207ee40426e5f93d519d801f8916ae010d8 Author: Douglas Anderson Date: Mon May 15 13:13:51 2023 -0700 irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues [ Upstream commit 44bd78dd2b8897f59b7e3963f088caadb7e4f047 ] Some Chromebooks with Mediatek SoCs have a problem where the firmware doesn't properly save/restore certain GICR registers. Newer Chromebooks should fix this issue and we may be able to do firmware updates for old Chromebooks. At the moment, the only known issue with these Chromebooks is that we can't enable "pseudo NMIs" since the priority register can be lost. Enabling "pseudo NMIs" on Chromebooks with the problematic firmware causes crashes and freezes. Let's detect devices with this problem and then disable "pseudo NMIs" on them. We'll detect the problem by looking for the presence of the "mediatek,broken-save-restore-fw" property in the GIC device tree node. Any devices with fixed firmware will not have this property. Our detection plan works because we never bake a Chromebook's device tree into firmware. Instead, device trees are always bundled with the kernel. We'll update the device trees of all affected Chromebooks and then we'll never enable "pseudo NMI" on a kernel that is bundled with old device trees. When a firmware update is shipped that fixes this issue it will know to patch the device tree to remove the property. In order to make this work, the quick detection mechanism of the GICv3 code is extended to be able to look for properties in addition to looking at "compatible". Reviewed-by: Julius Werner Signed-off-by: Douglas Anderson Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid Signed-off-by: Sasha Levin commit dbf610997242ec62facd04a11c5258ba84607ea1 Author: Osama Muhammad Date: Mon May 15 22:29:38 2023 +0500 regulator: Fix error checking for debugfs_create_dir [ Upstream commit 2bf1c45be3b8f3a3f898d0756c1282f09719debd ] This patch fixes the error checking in core.c in debugfs_create_dir. The correct way to check if an error occurred is 'IS_ERR' inline function. Signed-off-by: Osama Muhammad commit 37bcc48e7dd15a8afcc8f66e16f283303a7f6d38 Author: Alexandru Sorodoc Date: Fri May 12 13:15:17 2023 +0300 platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0 [ Upstream commit 362c1f2ec82cb65940e1c73e15a395a7a891fc6f ] On ASUS GU604V the key 0x7B is issued when the charger is connected or disconnected, and key 0xC0 is issued when an external display is connected or disconnected. This commit maps them to KE_IGNORE to slience kernel messages about unknown keys, such as: kernel: asus_wmi: Unknown key code 0x7b Signed-off-by: Alexandru Sorodoc Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin commit 88d1c1365ff65462647ce39d7ad61d5ff14eb0a2 Author: Marek Vasut Date: Sun Mar 5 21:52:26 2023 +0100 power: supply: Ratelimit no data debug output [ Upstream commit 155c45a25679f571c2ae57d10db843a9dfc63430 ] Reduce the amount of output this dev_dbg() statement emits into logs, otherwise if system software polls the sysfs entry for data and keeps getting -ENODATA, it could end up filling the logs up. This does in fact make systemd journald choke, since during boot the sysfs power supply entries are polled and if journald starts at the same time, the journal is just being repeatedly filled up, and the system stops on trying to start journald without booting any further. Signed-off-by: Marek Vasut Reviewed-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 6be7a4bef9dc623af2dda541cf69dfed35fc18db Author: Milo Spadacini Date: Mon May 8 15:18:48 2023 +0200 tools: gpio: fix debounce_period_us output of lsgpio [ Upstream commit eb4b8eca1bad98f4b8574558a74f041f9acb5a54 ] Fix incorrect output that could occur when more attributes are used and GPIO_V2_LINE_ATTR_ID_DEBOUNCE is not the first one. Signed-off-by: Milo Spadacini Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 39eb9eb9ea4339e6e31cc95c09e89151868a76f5 Author: Krzysztof Kozlowski Date: Sun Apr 23 17:08:37 2023 +0200 ARM: dts: vexpress: add missing cache properties [ Upstream commit 328acc5657c6197753238d7ce0a6924ead829347 ] As all level 2 and level 3 caches are unified, add required cache-unified property to fix warnings like: vexpress-v2p-ca5s.dtb: cache-controller@2c0f0000: 'cache-unified' is a required property Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230423150837.118466-1-krzysztof.kozlowski@linaro.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit b2856c3cd3b233df5615dab731a87d63ae5e4072 Author: Hans de Goede Date: Sat Apr 15 20:23:39 2023 +0200 power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule() [ Upstream commit 59dddea9879713423c7b2ade43c423bb71e0d216 ] Use mod_delayed_work() instead of separate cancel_delayed_work_sync() + schedule_delayed_work() calls. Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit ce2b5f24caadb14ddbc34dd5ad30476e875a89cf Author: Hans de Goede Date: Sat Apr 15 18:07:32 2023 +0200 power: supply: sc27xx: Fix external_power_changed race [ Upstream commit 4d5c129d6c8993fe96e9ae712141eedcb9ca68c2 ] sc27xx_fgu_external_power_changed() dereferences data->battery, which gets sets in ab8500_btemp_probe() like this: data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc, &fgu_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where sc27xx_fgu_external_power_changed() may get called while data->battery has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in data->battery, so sc27xx_fgu_external_power_changed() can simply directly use the passed in psy argument which is always valid. After this change sc27xx_fgu_external_power_changed() is reduced to just "power_supply_changed(psy);" and it has the same prototype. While at it simply replace it with making the external_power_changed callback directly point to power_supply_changed. Cc: Orson Zhai Cc: Chunyan Zhang Signed-off-by: Hans de Goede Reviewed-by: Baolin Wang Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 9e9e150fa8a61cf1780aa680fcdffe24229e0c80 Author: Hans de Goede Date: Sat Apr 15 18:07:29 2023 +0200 power: supply: ab8500: Fix external_power_changed race [ Upstream commit a5299ce4e96f3e8930e9c051b28d8093ada87b08 ] ab8500_btemp_external_power_changed() dereferences di->btemp_psy, which gets sets in ab8500_btemp_probe() like this: di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where ab8500_btemp_external_power_changed() may get called while di->btemp_psy has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in di->btemp_psy, so ab8500_btemp_external_power_changed() can simply directly use the passed in psy argument which is always valid. And the same applies to ab8500_fg_external_power_changed(). Signed-off-by: Hans de Goede Reviewed-by: Linus Walleij Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 539c387f0bb9c4a13ccd50133103a7b38db33b2b Author: Mirsad Goran Todorovac Date: Tue May 9 10:47:47 2023 +0200 test_firmware: fix a memory leak with reqs buffer [ Upstream commit be37bed754ed90b2655382f93f9724b3c1aae847 ] Dan Carpenter spotted that test_fw_config->reqs will be leaked if trigger_batched_requests_store() is called two or more times. The same appears with trigger_batched_requests_async_store(). This bug wasn't trigger by the tests, but observed by Dan's visual inspection of the code. The recommended workaround was to return -EBUSY if test_fw_config->reqs is already allocated. Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf") Cc: Luis Chamberlain Cc: Greg Kroah-Hartman Cc: Russ Weight Cc: Tianfei Zhang Cc: Shuah Khan Cc: Colin Ian King Cc: Randy Dunlap Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org # v5.4 Suggested-by: Dan Carpenter Suggested-by: Takashi Iwai Signed-off-by: Mirsad Goran Todorovac Reviewed-by: Dan Carpenter Acked-by: Luis Chamberlain Link: https://lore.kernel.org/r/20230509084746.48259-2-mirsad.todorovac@alu.unizg.hr Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit af36f35074b10dda0516cfc63d209accd4ef4d17 Author: Mirsad Goran Todorovac Date: Tue May 9 10:47:45 2023 +0200 test_firmware: prevent race conditions by a correct implementation of locking [ Upstream commit 4acfe3dfde685a5a9eaec5555351918e2d7266a1 ] Dan Carpenter spotted a race condition in a couple of situations like these in the test_firmware driver: static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) { u8 val; int ret; ret = kstrtou8(buf, 10, &val); if (ret) return ret; mutex_lock(&test_fw_mutex); *(u8 *)cfg = val; mutex_unlock(&test_fw_mutex); /* Always return full write size even if we didn't consume all */ return size; } static ssize_t config_num_requests_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int rc; mutex_lock(&test_fw_mutex); if (test_fw_config->reqs) { pr_err("Must call release_all_firmware prior to changing config\n"); rc = -EINVAL; mutex_unlock(&test_fw_mutex); goto out; } mutex_unlock(&test_fw_mutex); rc = test_dev_config_update_u8(buf, count, &test_fw_config->num_requests); out: return rc; } static ssize_t config_read_fw_idx_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { return test_dev_config_update_u8(buf, count, &test_fw_config->read_fw_idx); } The function test_dev_config_update_u8() is called from both the locked and the unlocked context, function config_num_requests_store() and config_read_fw_idx_store() which can both be called asynchronously as they are driver's methods, while test_dev_config_update_u8() and siblings change their argument pointed to by u8 *cfg or similar pointer. To avoid deadlock on test_fw_mutex, the lock is dropped before calling test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8() itself, but alas this creates a race condition. Having two locks wouldn't assure a race-proof mutual exclusion. This situation is best avoided by the introduction of a new, unlocked function __test_dev_config_update_u8() which can be called from the locked context and reducing test_dev_config_update_u8() to: static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) { int ret; mutex_lock(&test_fw_mutex); ret = __test_dev_config_update_u8(buf, size, cfg); mutex_unlock(&test_fw_mutex); return ret; } doing the locking and calling the unlocked primitive, which enables both locked and unlocked versions without duplication of code. The similar approach was applied to all functions called from the locked and the unlocked context, which safely mitigates both deadlocks and race conditions in the driver. __test_dev_config_update_bool(), __test_dev_config_update_u8() and __test_dev_config_update_size_t() unlocked versions of the functions were introduced to be called from the locked contexts as a workaround without releasing the main driver's lock and thereof causing a race condition. The test_dev_config_update_bool(), test_dev_config_update_u8() and test_dev_config_update_size_t() locked versions of the functions are being called from driver methods without the unnecessary multiplying of the locking and unlocking code for each method, and complicating the code with saving of the return value across lock. Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf") Cc: Luis Chamberlain Cc: Greg Kroah-Hartman Cc: Russ Weight Cc: Takashi Iwai Cc: Tianfei Zhang Cc: Shuah Khan Cc: Colin Ian King Cc: Randy Dunlap Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org # v5.4 Suggested-by: Dan Carpenter Signed-off-by: Mirsad Goran Todorovac Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 682ca602515ddec705451a738f8e7310fed3dc77 Author: Christophe JAILLET Date: Sat Jan 14 10:22:03 2023 +0100 test_firmware: Use kstrtobool() instead of strtobool() [ Upstream commit f7d85515bd21902b218370a1a6301f76e4e636ff ] strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file () Signed-off-by: Christophe JAILLET Acked-by: Luis Chamberlain Link: https://lore.kernel.org/r/34f04735d20e0138695dd4070651bd860a36b81c.1673688120.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 4acfe3dfde68 ("test_firmware: prevent race conditions by a correct implementation of locking") Signed-off-by: Sasha Levin commit 6e2e551e39fddda9a6c3385115368578c01d570e Author: Andy Shevchenko Date: Wed Jun 30 18:56:10 2021 -0700 kernel.h: split out kstrtox() and simple_strtox() to a separate header [ Upstream commit 4c52729377eab025b238caeed48994a39c3b73f2 ] kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out kstrtox() and simple_strtox() helpers. At the same time convert users in header and lib folders to use new header. Though for time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [andy.shevchenko@gmail.com: fix documentation references] Link: https://lkml.kernel.org/r/20210615220003.377901-1-andy.shevchenko@gmail.com Link: https://lkml.kernel.org/r/20210611185815.44103-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Acked-by: Jonathan Cameron Cc: Francis Laniel Cc: Randy Dunlap Cc: Kars Mulder Cc: Trond Myklebust Cc: Anna Schumaker Cc: "J. Bruce Fields" Cc: Chuck Lever Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 4acfe3dfde68 ("test_firmware: prevent race conditions by a correct implementation of locking") Signed-off-by: Sasha Levin commit c2def5578b440f6ac45fcffcf766d968d7c3bea5 Author: Alexey Dobriyan Date: Tue Dec 15 20:44:00 2020 -0800 lib: cleanup kstrto*() usage [ Upstream commit 506dfc9906e5cbf453bbcd5eb627689435583558 ] Use proper conversion functions. kstrto*() variants exist for all standard types. Link: https://lkml.kernel.org/r/20201122123410.GB92364@localhost.localdomain Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 4acfe3dfde68 ("test_firmware: prevent race conditions by a correct implementation of locking") Signed-off-by: Sasha Levin