knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)

1 Introduction

This is a package containing unCOVERApp, a shiny graphical application for clinical assessment of sequence coverage. unCOVERApp allows:

to display interactive plots showing sequence gene coverage down to base-pair resolution and functional/ clinical annotations of sequence positions within coverage gaps (Coverage Analysis page).
to calculate the maximum credible population allele frequency (AF) to be applied as AF filtering threshold tailored to the model of the disease-of-interest instead of a general AF cut-off (e.g. 1 % or 0.1 %) (Calculate AF by allele frequency app page).
to calculate the 95 % probability of the binomial distribution to observe at least N variant-supporting reads (N is the number of successes) based on a user-defined allele fraction that is expected for the variant (which is the probability of success). Especially useful to obtain the range of variant-supporting reads that is most likely to occur at a given a depth of coverage (DoC)(which is the number of trials) for somatic variants with low allele fraction (Binomial distributionpage).

2 Installation and example

Install the latest version of uncoverappLib using BiocManager.

uncoverappLib requires:

R version >= 4.1.2
java installed
Annotation files for clinical assessment of low-coverage positions.


install.packages("BiocManager")
BiocManager::install("uncoverappLib")
library(uncoverappLib)

Alternatively, it can be installed from GitHub using:


#library(devtools)
#install_github("Manuelaio/uncoverappLib")
#library(uncoverappLib)

When users load uncoverappLib for the first time, the first thing to do is a download of annotation files. getAnnotationFiles() function allows to download the annotation files from Zenodo and parse it using uncoverappLib package. The function does not return an R object but store the annotation files in a cache (sorted.bed.gz and sorted.bed.gz.tbi) and show
the cache path. The local cache is managed by the BiocFileCache Bioconductor package. It is sufficient run the function getAnnotationFiles(verbose= TRUE) one time after installing uncoverappLib package as shown below. The preprocessing time can take few minutes, therefore during running vignette, users can provide vignette= TRUE as a parameter to download an example annotation files, as below.

library(uncoverappLib)
#> Warning: replacing previous import 'utils::findMatches' by
#> 'S4Vectors::findMatches' when loading 'AnnotationDbi'
#> 
#> 
#getAnnotationFiles(verbose= TRUE, vignette= TRUE)

The preprocessing time can take few minutes.

3 Input file

All unCOVERApp functionalities are based on the availability of a BED-style formatted input file containing tab-separated specifications of genomic coordinates (chromosome, start position, end position), the coverage value, and the reference:alternate allele counts for each position. In the first page Preprocessing, users can prepare the input file by specifying the genes to be examined and the BAM file(s) to be inspected. Users should be able to provide:

a text file, with .txt extension, containing HGNC official gene name(s) one per row and to be uploaded to Load input file box. An example file is included in extdata of uncoverappLib packages

gene.list<- system.file("extdata", "mygene.txt", package = "uncoverappLib")

a text file, with .list extension, containing absolute paths to BAM files (one per row) and to be uploaded to Load bam file(s) list box.

Type the following command to load our example:


bam_example <- system.file("extdata", "example_POLG.bam", package = "uncoverappLib")

print(bam_example)
#> [1] "/tmp/RtmplBqZYB/Rinst28866f1a51abdc/uncoverappLib/extdata/example_POLG.bam"

write.table(bam_example, file= "./bam.list", quote= FALSE, row.names = FALSE, 
            col.names = FALSE)

and launch run.uncoverapp(where="browser") command. After running run.uncoverapp(where="browser") the shiny app appears in your deafult browser. RStudio user can define where launching uncoverapp using where option:

browser option will open uncoverapp in your default browser
viewer option will open uncoverapp in RStudio viewer
window option will open uncoverapp in RStudio RStudio

If option where is not defined uncoverapp will launch with default option of R.

In the first page Preprocessing users can load mygene.txt in Load input file and bam.list in Load bam file(s) list. In general, a target bed can also be used instead of genes name selecting Target Bed option in Choose the type of your input file. Users should also specify the reference genome in Genome box and the chromosome notation of their BAM file(s) in Chromosome Notation box. In the BAM file, the number option refers to 1, 2, …, X,.M chromosome notation, while the chr option refers to chr1, chr2, … chrX, chrM chromosome notation. Users can specify the minimum mapping quality (MAPQ) value in box and minimum base quality (QUAL) value in box. Default values for both mapping and base qualities is 1. Users can download Statistical_Summary report to obtain a coverage metrics per genes (List of genes name) or per amplicons (Target Bed) according to uploaded input file. The report summarizes following information: mean, median, number of positions under 20x and percentage of position above 20x.

To run the example, choose chr chromosome notation, hg19 genome reference and leave minimum mapping and base qualities to the default settings, as shown in the following screenshot of the Preprocessing page:

Figure 1: Screenshot of Preprocessing page

unCOVERApp input file generation fails if incorrect gene names are specified. An unrecognized gene name(s) table is displayed if such a case occurs. Below is a snippet of a the unCOVERApp input file generated as a result of the preprocessing step performed for the example


chr15   89859516        89859516        68      A:68
chr15   89859517        89859517        70      T:70
chr15   89859518        89859518        73      A:2;G:71
chr15   89859519        89859519        73      A:73
chr15   89859520        89859520        74      C:74
chr15   89859521        89859521        75      C:1;T:74

The preprocessing time depends on the size of the BAM file(s) and on the number of genes to investigate. In general, if many (e.g. > 50) genes are to be analyzed, we would recommend to use buildInput function
in R console before launching the app as shown in following example. This function also return a file with .txt estention containg statistical report of each genes/amplicon Alternatively, other tools do a similar job and can be used to generate the unCOVERApp input file ( for instance: bedtools, samtools, gatk). In this case, users can load the file directly on Coverage Analysis page in Select input file box.

Once pre-processing is done, users can move to the Coverage Analysis page and push the load prepared input file button.

Figure 2: Screenshot of Coverage Analysis page

To assess sequence coverage of the example, the following input parameters must be specified in the sidebar of the Coverage Analysis section

Reference Genome : reference genome (hg19 or hg38); choose hg19
Gene name and push Apply button: write the HGNC official gene name POLG
Coverage threshold : specify coverage threshold (e.g. 20x)
Sample : sample name to be analyzed
Transcript number : transcript number. Choose 1
exon number: to zoom in a specific exon. Choose 10

Other input sections, as Chromosome, Transcript ID, START genomic position, END genomic position and Region coordinate, are dynamically filled.

4 Output

unCOVERApp generates the following outputs :

unfiltered BED file in bed file and the corresponding filtered dataset in Low-coverage positions
information about POLG gene in UCSC gene table

Figure 3: Screenshot of output of UCSC gene table

information about POLG exons in UCSC exons table

Figure 4: Screenshot of output of Exon genomic coordinate positions from UCSC table

sequence gene coverage plot in Gene coverage . The plot displays the chromosome ideogram, the genomic location and gene annotations from Ensembl and the transcript(s) annotation from UCSC. Processing time is few minutes. A related table shows the number of uncovered positions in each exon given a user-defined transcript number (here transcript number is 1), and the user-defined threshold coverage (here the coverage threshold is 20x). Table and plot both show the many genomic positions that display low-DoC profile in POLG.

Figure 5: Screenshot of output of gene coverage

plot of a specific exon, choose exon 10 in sidebar Exon number , push Make exon and view the plot in Exon coverage . Processing time is few minutes. A related table shows the number of low-DoC positions in ClinVar which have a high impact annotation. For this output to be generated, sorted.bed.gz and sorted.bed.gz.tbi are required to be downloaded with getAnnotationFiles() function. Table and plot both show that 21 low-DoC genomic positions have ClinVar annotation, suggesting several clinically relevant positions that are not adequately represented in this experiment. It is possible zooming at base pair level choosing a few interval (20-30 bp) in Region coordinates and moving on Zoom to sequence.

Figure 6: zoom of exon 10

dbNSFP annotation of low coverage positions can be found in
Annotations on low-coverage positions. Functional and clinical annotations of all potential non- synonymous single-nucleotide variants across the examined low DoC sites are made available. Potential changes that have a clinical annotation, a high impact or deleterious prediction are highlighted in yellow. In the example, a low Doc site (chr15:89868687) is predicted as pathogenic and could be potentially linked to disease.

Figure 7: Example of uncovered positions annotate with dbNSFP

By clicking on the download button, users can save the table as spreadsheet format with certain cells colored according to pre-specified thresholds for AF, CADD, MAP-CAP, SIFT, Polyphen2, ClinVar, OMIM ID, HGVSp and HGVSc, …).

In Calculate maximum credible allele frequency page, users can set allele frequency cut-offs based on specific assumptions about the genetic architecture of the disease. If not specified, variants with allele frequency > 5 % will be instead filtered out. More details are available here. Moreover, users may click on the ”download” button and save the resulting table as spreadsheet format.

The Binomial distribution page returns the 95 % binomial probability distribution of the variant supporting reads on the input genomic position (Genomic position). Users should define the expected allele fraction (the expected fraction of variant reads, probability of success) and Variant reads (the minimum number of variant reads required by the user to support variant calling, number of successes). The comment color change according to binomial proportion intervals. If the estimated intervals , with 95% confidence, is included or higher than user-defined Variant reads the color of comment appears blue, otherwise if it is lower the color appears red.

5 Session information

#> R version 4.3.0 RC (2023-04-13 r84269)
#> Platform: x86_64-pc-linux-gnu (64-bit)
#> Running under: Ubuntu 22.04.2 LTS
#> 
#> Matrix products: default
#> BLAS:   /home/biocbuild/bbs-3.17-bioc/R/lib/libRblas.so 
#> LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
#> 
#> locale:
#>  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
#>  [3] LC_TIME=en_GB              LC_COLLATE=C              
#>  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
#>  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
#>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
#> 
#> time zone: America/New_York
#> tzcode source: system (glibc)
#> 
#> attached base packages:
#> [1] stats     graphics  grDevices utils     datasets  methods   base     
#> 
#> other attached packages:
#> [1] uncoverappLib_1.10.0 BiocStyle_2.28.0    
#> 
#> loaded via a namespace (and not attached):
#>   [1] later_1.3.0                             
#>   [2] BiocIO_1.10.0                           
#>   [3] bitops_1.0-7                            
#>   [4] filelock_1.0.2                          
#>   [5] tibble_3.2.1                            
#>   [6] graph_1.78.0                            
#>   [7] XML_3.99-0.14                           
#>   [8] rpart_4.1.19                            
#>   [9] lifecycle_1.0.3                         
#>  [10] Homo.sapiens_1.3.1                      
#>  [11] processx_3.8.1                          
#>  [12] lattice_0.21-8                          
#>  [13] ensembldb_2.24.0                        
#>  [14] OrganismDbi_1.42.0                      
#>  [15] backports_1.4.1                         
#>  [16] magrittr_2.0.3                          
#>  [17] openxlsx_4.2.5.2                        
#>  [18] Hmisc_5.0-1                             
#>  [19] sass_0.4.5                              
#>  [20] rmarkdown_2.21                          
#>  [21] jquerylib_0.1.4                         
#>  [22] yaml_2.3.7                              
#>  [23] rlist_0.4.6.2                           
#>  [24] shinyBS_0.61.1                          
#>  [25] httpuv_1.6.9                            
#>  [26] zip_2.3.0                               
#>  [27] Gviz_1.44.0                             
#>  [28] DBI_1.1.3                               
#>  [29] RColorBrewer_1.1-3                      
#>  [30] zlibbioc_1.46.0                         
#>  [31] GenomicRanges_1.52.0                    
#>  [32] AnnotationFilter_1.24.0                 
#>  [33] biovizBase_1.48.0                       
#>  [34] BiocGenerics_0.46.0                     
#>  [35] RCurl_1.98-1.12                         
#>  [36] nnet_7.3-18                             
#>  [37] VariantAnnotation_1.46.0                
#>  [38] rappdirs_0.3.3                          
#>  [39] GenomeInfoDbData_1.2.10                 
#>  [40] IRanges_2.34.0                          
#>  [41] S4Vectors_0.38.0                        
#>  [42] condformat_0.10.0                       
#>  [43] codetools_0.2-19                        
#>  [44] DelayedArray_0.26.0                     
#>  [45] DT_0.27                                 
#>  [46] xml2_1.3.3                              
#>  [47] tidyselect_1.2.0                        
#>  [48] shinyWidgets_0.7.6                      
#>  [49] matrixStats_0.63.0                      
#>  [50] stats4_4.3.0                            
#>  [51] BiocFileCache_2.8.0                     
#>  [52] base64enc_0.1-3                         
#>  [53] GenomicAlignments_1.36.0                
#>  [54] jsonlite_1.8.4                          
#>  [55] ellipsis_0.3.2                          
#>  [56] Formula_1.2-5                           
#>  [57] tools_4.3.0                             
#>  [58] progress_1.2.2                          
#>  [59] TxDb.Hsapiens.UCSC.hg19.knownGene_3.2.2 
#>  [60] Rcpp_1.0.10                             
#>  [61] glue_1.6.2                              
#>  [62] gridExtra_2.3                           
#>  [63] xfun_0.39                               
#>  [64] MatrixGenerics_1.12.0                   
#>  [65] GenomeInfoDb_1.36.0                     
#>  [66] dplyr_1.1.2                             
#>  [67] BiocManager_1.30.20                     
#>  [68] fastmap_1.1.1                           
#>  [69] latticeExtra_0.6-30                     
#>  [70] fansi_1.0.4                             
#>  [71] shinyjs_2.1.0                           
#>  [72] digest_0.6.31                           
#>  [73] R6_2.5.1                                
#>  [74] mime_0.12                               
#>  [75] colorspace_2.1-0                        
#>  [76] GO.db_3.17.0                            
#>  [77] jpeg_0.1-10                             
#>  [78] dichromat_2.0-0.1                       
#>  [79] markdown_1.6                            
#>  [80] biomaRt_2.56.0                          
#>  [81] RSQLite_2.3.1                           
#>  [82] utf8_1.2.3                              
#>  [83] generics_0.1.3                          
#>  [84] data.table_1.14.8                       
#>  [85] rtracklayer_1.60.0                      
#>  [86] prettyunits_1.1.1                       
#>  [87] httr_1.4.5                              
#>  [88] htmlwidgets_1.6.2                       
#>  [89] pkgconfig_2.0.3                         
#>  [90] gtable_0.3.3                            
#>  [91] blob_1.2.4                              
#>  [92] XVector_0.40.0                          
#>  [93] htmltools_0.5.5                         
#>  [94] bookdown_0.33                           
#>  [95] RBGL_1.76.0                             
#>  [96] ProtGenerics_1.32.0                     
#>  [97] scales_1.2.1                            
#>  [98] Biobase_2.60.0                          
#>  [99] TxDb.Hsapiens.UCSC.hg38.knownGene_3.17.0
#> [100] png_0.1-8                               
#> [101] EnsDb.Hsapiens.v75_2.99.0               
#> [102] knitr_1.42                              
#> [103] rstudioapi_0.14                         
#> [104] rjson_0.2.21                            
#> [105] checkmate_2.1.0                         
#> [106] curl_5.0.0                              
#> [107] org.Hs.eg.db_3.17.0                     
#> [108] cachem_1.0.7                            
#> [109] stringr_1.5.0                           
#> [110] parallel_4.3.0                          
#> [111] shinycssloaders_1.0.0                   
#> [112] foreign_0.8-84                          
#> [113] AnnotationDbi_1.62.0                    
#> [114] restfulr_0.0.15                         
#> [115] pillar_1.9.0                            
#> [116] grid_4.3.0                              
#> [117] vctrs_0.6.2                             
#> [118] promises_1.2.0.1                        
#> [119] dbplyr_2.3.2                            
#> [120] EnsDb.Hsapiens.v86_2.99.0               
#> [121] xtable_1.8-4                            
#> [122] cluster_2.1.4                           
#> [123] htmlTable_2.4.1                         
#> [124] evaluate_0.20                           
#> [125] GenomicFeatures_1.52.0                  
#> [126] cli_3.6.1                               
#> [127] compiler_4.3.0                          
#> [128] Rsamtools_2.16.0                        
#> [129] rlang_1.1.0                             
#> [130] crayon_1.5.2                            
#> [131] interp_1.1-4                            
#> [132] ps_1.7.5                                
#> [133] stringi_1.7.12                          
#> [134] deldir_1.0-6                            
#> [135] BiocParallel_1.34.0                     
#> [136] munsell_0.5.0                           
#> [137] Biostrings_2.68.0                       
#> [138] lazyeval_0.2.2                          
#> [139] Matrix_1.5-4                            
#> [140] BSgenome_1.68.0                         
#> [141] hms_1.1.3                               
#> [142] bit64_4.0.5                             
#> [143] ggplot2_3.4.2                           
#> [144] KEGGREST_1.40.0                         
#> [145] shiny_1.7.4                             
#> [146] SummarizedExperiment_1.30.0             
#> [147] highr_0.10                              
#> [148] memoise_2.0.1                           
#> [149] bslib_0.4.2                             
#> [150] bit_4.0.5

uncoverappLib: a R shiny package containing unCOVERApp an interactive graphical application for clinical assessment of sequence coverage at the base-pair level

25 April 2023

Package

Contents

1 Introduction

2 Installation and example

3 Input file

4 Output

5 Session information